Replacement power tool batteries

[Chris_The_Battery_Man]

I am not sure if you good folks know, but we re-pack battery packs for power tools. We have done this many times. Customers send us a pack for their cordless drill, saw, ect, we take it apart, and re-pack it with new cells. Prices are competitive, and you get way more power and run time.


If you have any questions, PM me or send an email to chris at cheapbatterypacks.com for more info on ordering.


I did these a couple weeks ago for a local guy. We can do anything that has a case you can take apart.

[AsILayDying]

How much for a DeWalt 18v XD battery to be done and shipped. Thanks.

Sent from my Samsung Galaxy Note (Phablet)

[Chris_The_Battery_Man]

The pack will cost about 56 bucks + shipping. Customers send us their dead pack to rebuild.

[trevinator]

Awesome idea! I was going to try this myself with hobby shop "sub C"s ...... way too expensive.....bought a new drill cheaper......

But $56 is great............... too bad I threw it away......

[BigSki]

Great service to offer! Some of the after market replacement packs are complete garbage, this service will make it stress free knowing that good quality batteries are being used in the rebuild.

[Charlie-III]

I'm willing to get a quote. I have a personal cordless drill that needs the pack replaced. Yes, I have multiple chargers to charge it.

I tried "Batteries Plus" but their cost was more than going to a MUCH newer system.

[Chris_The_Battery_Man]

Send me an email with your packs specs and I will get you pricing

[KBrog]

Im going to have to check and see if my packs can be taken apart so I can get them rebuilt.

[Charlie-III]

Originally Posted by KBrog

Im going to have to check and see if my packs can be taken apart so I can get them rebuilt.

They can always be taken apart, the question is.....can you get them back together??

[Chris_The_Battery_Man]

Ok folks. We found a potential great factory to supply us with all the parts and such to make just about any replacement power tool battery you can think of! Please tell us the drill you use. We want to get a feel of the more commonly used drills and power tools, so we can stock up on materials and such to start serving that industry. Thanks!!!

[bob1961]

i use dewalt 18v drill/saw combo ....dang and i just dropped a dead 18v batt off at home depot in one of there recycling boxes....i did take one apart once and seen how crappy they are put together and was thinking of rebuilding it with your cells from your site chris, but thought nahhh ....that 56.00 bucks sure beats dewalts 90.00 bucks for a new piece of junk .........bob

.....

[RootBreaker]

I have 2 dead ryobi 18v.....
Can buy a new 2 pack for 60.... So is your option worth it?

Sent from my Epic 4G Touch using Tapatalk

[Red Rockcrawler]

I just bought 2 new dewalt xrp batteries for $99.00. I do have 4 dead xrp batteries that I was going to tear apart to make a couple of good packs from what is left.

Let me know if you get cheaper price on replacing the cells.

[Charlie-III]

Sooo.....are you currently looking at NiCD/NiMH packs or can you do LiPO/LiON as well??

[SkaldidDog]

Do you service Hilti?

[Chris_The_Battery_Man]

I could do Hilti so long as the case could be easily taken apart.


We are working on Lion. Lipo could be done as long as you were willing to use an RC charger to charger with

[rangercat23]

Originally Posted by Chris_The_Battery_Man

We are working on Lion. Lipo could be done as long as you were willing to use an RC charger to charger with

Would the batt have a deans and balance pigtail sticking out the side to hook up to???

[Chris_The_Battery_Man]

Sure could

[rangercat23]

That would be awesome!
I need to go look for my old batt's now

[bob1961]

how long would a 5S lipo last used in an 18 volt dewalt drill ?....just looked at prices of 5S not much difference from a new dewalt 18.v battery is.....bob

....