|
| LinkBack | Thread Tools | Display Modes |
02-27-2013, 09:06 AM | #1 |
Newbie Join Date: Feb 2013 Location: Chico
Posts: 1
| ? Custom cage out stock plastic
First off I'm a newbie, how r u guys building custom cages out of the stock plastic? What procedures r involved? Thanks for the help
|
Sponsored Links | |
02-27-2013, 12:25 PM | #2 |
Quarry Creeper Join Date: Jan 2013 Location: Benicia/Vallejo
Posts: 490
| Re: ? Custom cage out stock plastic
The tube work is made from 3/16 and 1/4" brake line. Some people also use solid steel and stainless tubing. There are lots of threads on this subject have you read anything on this site yet?
|
02-27-2013, 01:19 PM | #3 |
Rock Stacker Join Date: Jun 2012 Location: Backwoods,Arkansas
Posts: 96
| Re: ? Custom cage out stock plastic |
02-27-2013, 01:38 PM | #4 |
Quarry Creeper Join Date: Jan 2013 Location: Benicia/Vallejo
Posts: 490
| Re: ? Custom cage out stock plastic
Really? I thought it was informative
|
02-27-2013, 02:21 PM | #5 |
Pebble Pounder Join Date: Feb 2013 Location: Near Aurora
Posts: 105
| Re: ? Custom cage out stock plastic
Just look around on this site and you will many threads that deal with cages, good luck...Doc
|
02-27-2013, 04:43 PM | #6 |
Newbie Join Date: Jan 2012 Location: Sarasora/Bradenton,Florida
Posts: 16
| Re: ? Custom cage out stock plastic
If you want to like I did,build one out of plastic clouth hanger and a hot glue gun Last edited by BORN_TO_CRAW; 02-27-2013 at 04:47 PM. |
03-26-2013, 06:46 PM | #7 |
Rock Crawler Join Date: Apr 2012 Location: Chattanooga
Posts: 639
| Re: ? Custom cage out stock plastic
Tjuney, welcome to rcc, imo you have signed up to one of the best site for the love of RC's. Especially crawlers and scalers. If you are talking about the wraith cage mods and such. I think most people drill a centering hole on both pieces and use a pin that is glued in to one end then inserted into the other piece. I think most people use plastruct or similar ca glue. Check out jia's ultra 4 build in the wraith section. He goes into detail on this. On another note, you may want to use the search box to search out commonly asked questions or check out the newbie area. Unfortunately there are some members who don't remember what it was like to be new and ask for help and you may get flamed but if you can't ind the answer and have checked around then ask away. Again welcome and enjoy |
03-27-2013, 12:04 AM | #8 |
RCC Addict Join Date: Jan 2007 Location: caldwell,idaho
Posts: 1,309
| Re: ? Custom cage out stock plastic
it's a shame you ask a question and get flamed by someone that didn't even read the whole question.you asked how to make it out of plastic not out of steel .welcome to the site |
03-27-2013, 08:01 AM | #9 |
Pebble Pounder Join Date: Jun 2012 Location: las cruces
Posts: 193
| Re: ? Custom cage out stock plastic
Haha yea how you gona flame a guy when you didn't even fully read or maybe comprehend what he posted and op I have no answer for your plastic cage but be prepared to get a lot of answers like search and even ruder versions people forget that not everyone's computer literacy is on the same level and then their is some who think they're a forum god and they were never knowledge newbs anyway don't let that stuff bring you down or away from the sport. I myself get most of my info off google then it'll link me to a thread on here. Anyway what I'm getting at don't hate the sport or the forum cuz some people are Richards
|
03-31-2013, 07:09 PM | #10 |
RCC Addict Join Date: Aug 2011 Location: Elkhart
Posts: 922
|
Well said danmac; Just was reading the thread and wanted to say good luck TJUNEY I don't know much about plastic cages, but you WILL find anything you need to on this site, very good site to learn and never hesitate to ask ?s Yes the search bar is your friend but so is google, don't let someone's words get ya down, everyone is/was a newbie at one point in their life, NO ONE knew all the answers to begin with! Again GOODLUCK tjuney |
? Custom cage out stock plastic - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Custom cage | lambo-27 | 1.9 Scale Rigs | 14 | 07-13-2011 03:21 PM |
Custom Plastic tube bed? | Foxes United | Paint and Body | 4 | 06-30-2011 01:18 PM |
Custom plastic chassis? | Skier | Paint and Body | 4 | 06-21-2011 08:51 PM |
| |