05-02-2014, 12:03 AM | #1 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Don't Fear the WIRES!!!
OverkillRC has your back! OverkillRC has Cutters, Crimpers, and Strippers to turn your rats nest into a clean and tidy wiring harness. First up is the flush cutters. Flush cutters are basically a different form of the typical diagonal cutter. The major difference is that they are ground flush on the back side. This is for cutting off soldered leads flush to a circuit board. However, this also creates a nice sharp edge for improved wire cutting performance. CLICK HERE FOR PRICE AND FULL DESCRIPTION Next up is the wire strippers. I'll offer two sizes 10-22AWG which will be great for battery and power wires. I've also used them in automotive and residential wiring. CLICK HERE FOR THE 10-22 AWG STRIPPERS And then, there is the 20-30 AWG strippers. These are great for servo wires. CLICK HERE FOR THE 20-30 AWG STRIPPERS We also now have a professional crimping tool for all your servo connector needs Servo Plug Crimpers It comes with a single stage die, so get a solid crimp around the insulation and wire stands with one squeeze! It also has a ratcheting mechanism which provides a better mechanical advantage (leverage). This allows for tighter, more consistent crimps and it's easier to use. Professional, tight crimps that you can rely on How to make a Crimp in 5 Steps We also sell female terminals and housings so you can shorten all those pesky servo leads Servo Plugs Post up any feedback or suggestions on what else you'd like to see OverkillRC carry. Thanks! . |
Sponsored Links | |
05-08-2014, 08:19 AM | #2 |
RCC Addict Join Date: Apr 2009 Location: Token's life matters
Posts: 1,836
| Re: Don't Fear the WIRES!!!
While I do not have these tools, I have very very similar and I can say that once you buy flush cutters, and a servo crimper you will wonder why you have been stuffing wires everywhere. VERY handy tools to own.
|
05-21-2014, 09:32 PM | #3 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: Don't Fear the WIRES!!!
I'm getting ready to get together another order, bringing in afew more things and stocking up on everything. (New stuff == Male servo ends (male pins), servo wire, and maybe some pig tails) So far, all i've heard is good results. And starting to get re-orders which is always a good sign If you have any requests for something todo with wiring stuff up, send me an email. Tools, crimp connections, wire, pig tails, etc. Also, If you're unhappy with any of the tools you purchased through me; Send me an email within 2 weeks of receipt and I'll send a full refund plus a return shipping label. |
05-22-2014, 10:33 AM | #4 |
RCC Addict Join Date: Oct 2009 Location: San Francisco
Posts: 1,927
| Re: Don't Fear the WIRES!!!
Nice price on the flush cutters... so what your saying is I would mangle them to death if I tried to cut my model train track with them that being said good quality tools make the job sooooo much easier and safer. Beats trying to strip wire with a pair of scissors or an x-acto knife |
05-22-2014, 10:59 AM | #5 |
N.E.R.C.C Uncle Blinky Join Date: Dec 2008 Location: RUKDNME...
Posts: 976
| Re: Don't Fear the WIRES!!! Servo Plugs so you get a pack of 10 for $5.50? |
05-22-2014, 05:56 PM | #6 | ||
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: Don't Fear the WIRES!!! Quote:
Quote:
| ||
05-23-2014, 06:18 PM | #7 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: Don't Fear the WIRES!!!
I should have more goodies for ya'll late next week or early the following week. ~ I'll have crimpers, and standard servo plugs will be back in stock ~ I'll have male servo plugs (male crimp pins, female plastic housings)...these are good if you want to make extensions or a quick disconnect type thing if you're wiring up led's or something ~ I've got some high quality servo wire coming in. 22awg, white/red/black wire color, very flexible. ~ Lastly, but still amazing...I'll be selling 8" pre made servo leads |
05-23-2014, 06:21 PM | #8 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: Don't Fear the WIRES!!!
I plan on carrying smaller gauge wire in the future (26 and 28 awg) for scaler wiring. Along with some other goodies to make your scaler wiring harness sexy |
05-28-2014, 05:57 PM | #9 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: Don't Fear the WIRES!!!
Crimpers and servo plugs are back in stock I also added some male servo ends (Female plastic, male crimp pins) to my site (no pics yet) I'll be adding 22awg servo wire in the next week or so, once i get it cut up in chunks and take some pics. It'll be sold in 10ft chunks. It is futaba colors, black/red/white. |
05-28-2014, 06:17 PM | #10 |
RCC Addict Join Date: Dec 2006 Location: Oak Ridge, TN
Posts: 1,141
| Re: Don't Fear the WIRES!!!
I've had a set of the blue handled servo wire crimpers for about a year now and they work great. Definitely a must have item |
05-28-2014, 11:35 PM | #11 |
RCC Addict Join Date: Oct 2009 Location: San Francisco
Posts: 1,927
| Re: Don't Fear the WIRES!!!
The wire is "nickel silver" (primarily copper with some nickel and zinc) so its relatively easy to cut its just you need good quality cutters or you will mash the rail and cause lots of issues |
05-29-2014, 12:15 AM | #12 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: Don't Fear the WIRES!!!
I'm not sure how well they'd handle that...I've actually had good luck with these compared to other flush cutters I've used. They may deform, but it may just dull them quickly. I'll tell you what, if you mangle them death because the train track is too hard, I'll give you half off a replacement pair. |
05-29-2014, 04:48 PM | #13 | |
RCC Addict Join Date: Oct 2009 Location: San Francisco
Posts: 1,927
| Re: Don't Fear the WIRES!!! Quote:
| |
11-01-2014, 03:22 PM | #14 |
Got Worms? Join Date: Jun 2009 Location: Golden, CO
Posts: 6,116
| Re: Don't Fear the WIRES!!!
Bump
|
11-01-2014, 05:53 PM | #15 | |
I wanna be Dave Join Date: Jan 2009 Location: New Port Richey, FL.
Posts: 2,545
| Re: Don't Fear the WIRES!!! Quote:
| |
Don't Fear the WIRES!!! - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
nicodrives Beetlejuice V3 Berg - No fear... | nicodrive01 | EnRoute Berg | 11 | 05-02-2010 09:39 PM |
no fear at the cape fear | clodstall | Videos! | 29 | 12-09-2007 12:19 PM |
bashing at the cape fear | clodstall | Videos! | 3 | 11-19-2007 06:37 PM |
Cape Fear River | clodstall | Videos! | 0 | 03-15-2007 05:24 PM |
| |