What hex drivers you using? I’m looking for some decent metric hex Drivers 1.5, 2 and 2.5mm basically. I have a cheap duratrax tool set that I’ve already worn the tips out of them. Any suggestions? Thanks |
Re: What hex drivers you using? Quote:
Verstuurd vanaf mijn SM-J730F met Tapatalk |
Re: What hex drivers you using? I did the same with the black and red, plastic-handled Duratrax drivers. MIP is what I use and I have some from LockedUp RC. Losi and Associated also make good drivers. |
Re: What hex drivers you using? Has anyone used the wiha brand tools with precision handles? I know they make other nice tools and are made in Germany |
Re: What hex drivers you using? Quote:
|
Re: What hex drivers you using? Quote:
|
Re: What hex drivers you using? MIP ftw. Worn out a couple of 1.5's from other brands but the MIP driver is still as new. |
Re: What hex drivers you using? I've got a set of the team losi hex drivers with replaceable tips that I've had for around ten years. Never had one bad go yet. Although i don't replace the tips when they're worn. I take them to work and cut off about .050" with an endmill in the Bridgeport mill to get back where the hex isn't worn. Don't use a grinder to do it however, the heat softens the steel and your guaranteed a strip out then. |
What hex drivers you using? I love my mips cause of the handle. I had mine for over a year and built 5 trucks and used them alot and no wear at all. Skickat från min iPhone med Tapatalk |
Re: What hex drivers you using? I ordered a set of these from eds. If I like them I'm gonna order another set of the ball end drivers also. With tax and shipping it came to $40 RC ALLEN WRENCH METRIC SET - 4 PCS |
Re: What hex drivers you using? I prefer the aluminum knurled handle and I like the longer ones so I went with them instead of mip |
Re: What hex drivers you using? MIP all day! |
Re: What hex drivers you using? Dynamite |
Re: What hex drivers you using? Hudy - They cost a little more but have really good fit and last a long time. You can purchase them from amain hobby. |
Re: What hex drivers you using? I use wiha tools and no regrets https://uploads.tapatalk-cdn.com/201...2f29bcbf41.jpghttps://uploads.tapatalk-cdn.com/201...de005516f0.jpg But MIP or Huddy are very good |
Re: What hex drivers you using? That looks like a nice set with the telescoping shafts |
Re: What hex drivers you using? Quote:
Dynamite has a set just like this now. I also have been using an additional dynamite set that holds all the drivers in the handle for the last 7yrs. No issues yet with either set. Sent from my iPad using Tapatalk |
Re: What hex drivers you using? Quote:
|
Re: What hex drivers you using? I have 2 sets of snap-on drivers. Expensive yes but lifetime warranty and the guy comes to my shop every week so I can swap em out if they get worn. I have wiha precision Philips and they are the best I've ever owned. |
Re: What hex drivers you using? Quote:
|
All times are GMT -6. The time now is 03:06 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com