What RC parts have you 3D Printed????

[Sniper4370]

This was a quick print. No tweaks to the settings other than temps. The ends of the post came out a little boogered up but you can see the support removed cleanly.

[JatoTheRipper]

Originally Posted by Sniper4370

This was a quick print. No tweaks to the settings other than temps. The ends of the post came out a little boogered up but you can see the support removed cleanly.

I'm struggling with an undetermined issue with my printer right now so that is probably why I'm also having issues with the supports.

[punkindrublik]

Made up a bun for the berger...

[antigacho]

not and RC part but this tool holder is very helpful on my workbench

it also works as phone holder

bench buddy

https://www.thingiverse.com/thing:4283865

[JSterrett]

Had a broken locker in one of my Losi MRCs. Couldn't find the part online anywhere, so I made my own. Now that I have the dimensions down, I might load it up to Shapeways and see how much it would cost to get metal lockers printed...



Sent from my SM-G970U using Tapatalk

[JatoTheRipper]

Originally Posted by JSterrett

Had a broken locker in one of my Losi MRCs. Couldn't find the part online anywhere, so I made my own. Now that I have the dimensions down, I might load it up to Shapeways and see how much it would cost to get metal lockers printed...

Nice work! I have metal lockers here...somewhere. They may be lost forever.

You may also want to try My Mini Factory. I hear their prices are much better than Shapeways. I haven't tried them yet, but I definitely will in the future.

https://www.myminifactory.com/

[JSterrett]

Originally Posted by JatoTheRipper

Nice work! I have metal lockers here...somewhere. They may be lost forever.



You may also want to try My Mini Factory. I hear their prices are much better than Shapeways. I haven't tried them yet, but I definitely will in the future.



https://www.myminifactory.com/

I didn't realize they did printing. I've used them to share files, but not for printing, thanks for the heads-up.

Sent from my SM-G970U using Tapatalk

[JatoTheRipper]

Originally Posted by JSterrett

I didn't realize they did printing. I've used them to share files, but not for printing, thanks for the heads-up.

Sent from my SM-G970U using Tapatalk

You're welcome. There's also JawsTec. Somebody on here posted about them and they were pleased with what they received.

https://www.jawstec.com/

[JSterrett]

Think I finally finished my full-size servo mount for the MRC. Can also be used as a 4-link mount with very minor axle modifications...



Sent from my SM-G970U using Tapatalk

[vwdaveb]

Looks good, nice job.

Sent from my SM-N975U using Tapatalk

[k7zpj]

I made a rear electronics box / ESC mounting plate with rear deck cover for upgrading for my aging Wraith to a brushless system. The deck cover was printed on a textured build plate to give it a bed liner look.

[Sniper4370]

Currently 7 hours into the cab portion of a Tacoma body. Already did the front end a few weeks ago.

[Tossedman]

Except for the exhaust this engine is as good as done.

[JSterrett]

Originally Posted by Tossedman

Except for the exhaust this engine is as good as done.

That's sweet. Very nice work.

Sent from my SM-G970U using Tapatalk

[Tossedman]

Thanks. It's amazing what a difference a bit of wire, some tiny bolts and a rubber band make.

[JatoTheRipper]

I saw somebody selling these for a crazy amount of money. I wanted one for a much better price so I designed and printed my own. It's a scale battery voltage meter.

[drzoo2]

Originally Posted by JatoTheRipper

I saw somebody selling these for a crazy amount of money. I wanted one for a much better price so I designed and printed my own. It's a scale battery voltage meter.

Cool idea. What are the dimensions? I've been thinking of doing a switch in a battery configuration. My battery is difficult to get to and turn the truck off/on while I'm waiting for my run. Be nice to have it all in one if I can keep it scale enough.

Sent from my HTC U11 using Tapatalk

[Sniper4370]

Originally Posted by JatoTheRipper

I saw somebody selling these for a crazy amount of money. I wanted one for a much better price so I designed and printed my own. It's a scale battery voltage meter.

Came out great. I take it you got the issues with the printer sorted out?

[JatoTheRipper]

Originally Posted by Sniper4370

Currently 7 hours into the cab portion of a Tacoma body. Already did the front end a few weeks ago.

Post some photos!

Originally Posted by Tossedman

Except for the exhaust this engine is as good as done.

That looks great! Details are everything.

Originally Posted by drzoo2

Cool idea. What are the dimensions? I've been thinking of doing a switch in a battery configuration. My battery is difficult to get to and turn the truck off/on while I'm waiting for my run. Be nice to have it all in one if I can keep it scale enough.

Thank you! It's something like 1" x 1-3/8.

Originally Posted by Sniper4370

Came out great. I take it you got the issues with the printer sorted out?

Thank you! Yes, I got great help from a member on here. I had to completely recalibrate my machine for some reason.

[kevman1]

I wonder if someone can help me.

I want to print this rim for my muscle car RC

https://www.thingiverse.com/thing:2343260

But I want it to accept VTA style tires so it needs to have top lip like the vintage style version of these rims.

https://www.thingiverse.com/thing:2765747

CAn anyone help me figure this out ?