What RC parts have you 3D Printed????

[DeeJay73]

Originally Posted by HumboldtEF

Those reservoirs look spot on with fluids and all. Did you pour paint into them or whats the method?

They are actual reservoirs holding fluid.


Sent from my iPhone using Tapatalk

[DeeJay73]

Originally Posted by vwdaveb

Are you Printing with filament or resin?




Sent from my SM-N950U using Tapatalk

I am printing with filament.


Sent from my iPhone using Tapatalk

[JohnnyAnguish]

Wow. Those engine bays look fantastic!

[JatoTheRipper]

Originally Posted by vwdaveb

Are you Printing with filament or resin?

I'm guessing he paused the print, added colored water, and then resumed the print.

[DeeJay73]

Originally Posted by JatoTheRipper

I'm guessing he paused the print, added colored water, and then resumed the print.

Not at all. I designed actual coolant and washer tanks with lids, just like the full size version.


Sent from my iPhone using Tapatalk

[JatoTheRipper]

Originally Posted by DeeJay73

Not at all. I designed actual coolant and washer tanks with lids, just like the full size version.


Sent from my iPhone using Tapatalk

Oh wow. Cool!

[gsgraber92]

I’ve been working on this for some time and have made many different iterations. I think I’m finally happy with how this has turned out. All designed by me in Onshape, using Simplify3d on a Wanhao i3+.

Jeep XJ 4.0L with single speed trans and transfer case.






Sent from my iPhone using Tapatalk

[JatoTheRipper]

Originally Posted by gsgraber92

I’ve been working on this for some time and have made many different iterations. I think I’m finally happy with how this has turned out. All designed by me in Onshape, using Simplify3d on a Wanhao i3+.

Jeep XJ 4.0L with single speed trans and transfer case.

That's awesome! Does it hold a 540 motor inside?

[gsgraber92]

Originally Posted by JatoTheRipper

That's awesome! Does it hold a 540 motor inside?

Yes, sir!


Sent from my iPhone using Tapatalk

[Voodoobrew]

That is pretty sweet, what gears do you have in it? Do you have any plans on sharing the files?

[gsgraber92]

Originally Posted by Voodoobrew

That is pretty sweet, what gears do you have in it? Do you have any plans on sharing the files?

I will at some point. I modified the original transmission shafts a little so I might go back and make some mods to allow factory Axial shafts work.

I am using a 12t pinion and a 45t pinion in the bell housing. Everything else is stock SCX10.2 kit tranny internals. Original is 3.73 mine is 3.75

Sent from my iPhone using Tapatalk

[BashNSlash]

Has anyone printed a front mounted servo mount for the SCX10 ii? I bought a metal one before getting my 3d printer, and the ones from thingiverse don't seem to be anywhere close to the design that I know works - still looking for an STL file that works.

[Voodoobrew]

Originally Posted by BashNSlash

Has anyone printed a front mounted servo mount for the SCX10 ii? I bought a metal one before getting my 3d printer, and the ones from thingiverse don't seem to be anywhere close to the design that I know works - still looking for an STL file that works.

What is the design that works?

[BashNSlash]

Originally Posted by Voodoobrew

What is the design that works?

This is the metal one I use on my other scx10 and it works really well.

I did manage to find a 3d print file that fits my truck, but I'm not with the other components so I don't know how well it works on the trail. https://3dgeeks.2b.work/pages/view-t...tml?id=3360737

I do notice that the steering geometry seems strained and I don't know if I need to mod something else to get it working. I have to compare it with my other rig and see where things need adjusting.

[Voodoobrew]

Dosen't look that different to me. Perhaps it's the height the servo is mounted. You may be able to mirror that print to correct the servos mounting location if that's the problem.

[BashNSlash]

Originally Posted by Voodoobrew

Dosen't look that different to me. Perhaps it's the height the servo is mounted. You may be able to mirror that print to correct the servos mounting location if that's the problem.

The recent file I used (the link I provided) is a good one, but I still have to adjust things to get better geometry. The other files I found were a totally different design or had no bumper mounting holes

Yesterday, printed a new a-arm for my son's Traxxas Stampede

[gsgraber92]

I’m working on a new CMS/bumper mounting bracket. My motor takes up all the original servo/battery room.




Sent from my iPhone using Tapatalk

[DeeJay73]

Originally Posted by gsgraber92

I’m working on a new CMS/bumper mounting bracket. My motor takes up all the original servo/battery room.




Sent from my iPhone using Tapatalk

I solved that problem with mine.


Sent from my iPhone using Tapatalk

[gsgraber92]

Originally Posted by DeeJay73

I solved that problem with mine.


Sent from my iPhone using Tapatalk

That is nice. Your motor looks super real! Is that a 3D print?


Sent from my iPhone using Tapatalk

[DeeJay73]

Originally Posted by gsgraber92

That is nice. Your motor looks super real! Is that a 3D print?


Sent from my iPhone using Tapatalk

Yes it is.


Sent from my iPhone using Tapatalk