Go Back   RCCrawler Forums > RCCrawler General Tech > Tools, and Procedures
Loading

Notices

Thread: What RC parts have you 3D Printed????

Reply
 
LinkBack Thread Tools Display Modes
Old 11-17-2019, 11:06 PM   #161
Quarry Creeper
 
Join Date: Apr 2017
Location: Melbourne Australia
Posts: 404
Default Re: What RC parts have you 3D Printed????

Quote:
Originally Posted by gsgraber92 View Post
Recently purchased a Wraith 1.9 and couldn’t leave well enough alone so I started working on a new gearbox and transfer case. Plan to add something under the hood as well. Designed in Onshape and printed on a Wanhao i3 Plus.




Sent from my iPhone using Tapatalk
Wow!! Well done. A scale transmission is something I have been meaning to tackle but just haven't got around to it!

Sent from my LYA-L09 using Tapatalk
nedmo is offline   Reply With Quote
Sponsored Links
Old 11-19-2019, 07:40 PM   #162
I wanna be Dave
 
Join Date: Jun 2017
Location: Humboldt county
Posts: 4,475
Default Re: What RC parts have you 3D Printed????

Not and RC part but a tool, the threadlock station.
I made it to keep my arm out of the loctite, I almost always end up resting my arm on the dabs I put on my workbench. I also made a slot to put a paper towel in to wipe of the excess. I used the dime to keep the plastic from melting, though the PETG might have held up okay as it is chemical resistant.



Nice work gsgraber92! If you can please resize those pictures, it throws off the entire page.

Last edited by HumboldtEF; 11-19-2019 at 07:44 PM.
HumboldtEF is offline   Reply With Quote
Old 11-19-2019, 08:35 PM   #163
Rock Crawler
 
Join Date: Jul 2016
Location: Southern Oregon
Posts: 767
Default Re: What RC parts have you 3D Printed????

Don't remember if I already posted these. Cinderblock wall facades for my scale garage...

Oh, and the MRAP body for my TRX-4 that's still a work in progress...



Sent from my SM-G970U using Tapatalk
JSterrett is offline   Reply With Quote
Old 11-19-2019, 08:43 PM   #164
I wanna be Dave
 
Join Date: Jun 2017
Location: Humboldt county
Posts: 4,475
Default Re: What RC parts have you 3D Printed????

Quote:
Originally Posted by JSterrett View Post
Don't remember if I already posted these. Cinderblock wall facades for my scale garage...

Oh, and the MRAP body for my TRX-4 that's still a work in progress...


Sent from my SM-G970U using Tapatalk

Nice work, I though I saw the cinder blocks before but now we can see the bigger walls just needs some edge pieces.


That body looks pretty sweet too
HumboldtEF is offline   Reply With Quote
Old 11-19-2019, 09:55 PM   #165
Rock Stacker
 
Join Date: Oct 2014
Location: Raeford
Posts: 84
Default Re: What RC parts have you 3D Printed????

Like the wall, makes a cool scale garage.

Humboldt, at least it's just threadlock. When I was building my 66 VW bus, I laid my arm on spots I had just welded. Several times while putting the floors in.
vwdaveb is offline   Reply With Quote
Old 11-20-2019, 07:19 PM   #166
I wanna be Dave
 
Join Date: Jun 2017
Location: Humboldt county
Posts: 4,475
Default Re: What RC parts have you 3D Printed????

Quote:
Originally Posted by vwdaveb View Post
Humboldt, at least it's just threadlock. When I was building my 66 VW bus, I laid my arm on spots I had just welded. Several times while putting the floors in.

Okay you got me beat there, I've picked up a few freshly welded parts in my day too but I never put all my weight on it like you. Time for some loooong sleeve gloves!
HumboldtEF is offline   Reply With Quote
Old 11-26-2019, 02:15 PM   #167
Quarry Creeper
 
Join Date: Apr 2017
Location: Melbourne Australia
Posts: 404
Default Re: What RC parts have you 3D Printed????

Just finished these sliders

Sent from my LYA-L09 using Tapatalk
nedmo is offline   Reply With Quote
Old 11-28-2019, 11:22 PM   #168
Rock Crawler
 
Join Date: Jul 2016
Location: Southern Oregon
Posts: 767
Default Re: What RC parts have you 3D Printed????

Thanksgiving project...



Sent from my SM-G970U using Tapatalk
JSterrett is offline   Reply With Quote
Old 11-29-2019, 07:02 PM   #169
Rock Crawler
 
Join Date: Jul 2016
Location: Southern Oregon
Posts: 767
Default Re: What RC parts have you 3D Printed????

Unfortunately I ran out of red filament just before it finished, so I'll have to paint it when it's all done, but here's the progress so far. Just have a bunch of drawers to print...





Sent from my SM-G970U using Tapatalk
JSterrett is offline   Reply With Quote
Old 11-29-2019, 07:03 PM   #170
Moderator
 
JatoTheRipper's Avatar
 
Join Date: Sep 2008
Location: PA
Posts: 13,922
Default Re: What RC parts have you 3D Printed????

Quote:
Originally Posted by gsgraber92 View Post
Recently purchased a Wraith 1.9 and couldn’t leave well enough alone so I started working on a new gearbox and transfer case. Plan to add something under the hood as well. Designed in Onshape and printed on a Wanhao i3 Plus.

That's awesome!
JatoTheRipper is offline   Reply With Quote
Old 12-01-2019, 06:05 PM   #171
Rock Crawler
 
Join Date: Dec 2005
Location: Marietta
Posts: 917
Default Re: What RC parts have you 3D Printed????

I made some faux rocker guards to retain the body in my VS4-10 chassis kit. Also to hide the shitty job I did trimming the body. Mostly to hide my hack job on the body.

GA Dawg is offline   Reply With Quote
Old 12-02-2019, 04:26 PM   #172
Quarry Creeper
 
Join Date: May 2019
Location: North Highlands
Posts: 483
Default Re: What RC parts have you 3D Printed????

I CADded up some runners, a skid, a battery tray and a fliptop/body mount for my Enduro/Machete. The runners and skid are carbon filament, the battery tray is PLA and the body mounts are TPU. Came out well I think.







punkindrublik is offline   Reply With Quote
Old 12-02-2019, 06:24 PM   #173
I wanna be Dave
 
Join Date: Feb 2017
Location: My mothers basement
Posts: 2,128
Default Re: What RC parts have you 3D Printed????

Those sliders are brilliant! They will Move the motor down and you can run Portals.

Sent from my SM-N950U using Tapatalk

Oh I thought that was an scx10 chassis for some reason. Well I'm gonna make something similar for my scx10 to lower the skid.

Last edited by Voodoobrew; 12-02-2019 at 06:26 PM.
Voodoobrew is offline   Reply With Quote
Old 12-02-2019, 06:31 PM   #174
Quarry Creeper
 
Join Date: May 2019
Location: North Highlands
Posts: 483
Default Re: What RC parts have you 3D Printed????

Quote:
Originally Posted by Voodoobrew View Post
Those sliders are brilliant! They will Move the motor down and you can run Portals.

Sent from my SM-N950U using Tapatalk

Oh I thought that was an scx10 chassis for some reason. Well I'm gonna make something similar for my scx10 to lower the skid.

Nope, it's a GMRC Machete. I'm about to do the same thing for my Brazin ATL which will actually be running portals

And thanks!!
punkindrublik is offline   Reply With Quote
Old 12-09-2019, 07:27 PM   #175
Pebble Pounder
 
Join Date: Aug 2010
Location: Anderson, SC
Posts: 161
Default Re: What RC parts have you 3D Printed????

A little while back I posted some pics of the transmission I printed for my Wraith 1.9. Here is is finished. I redesigned the receiver box to accept the factory lid while helping conceal the electric motor. I modified the battery box to hide the battery so it looks cleaner under the hood. I tucked the front bumper in a bit more. Added reinforcement to the front end to make the frame more solid.




Sent from my iPhone using Tapatalk

Last edited by gsgraber92; 12-09-2019 at 07:32 PM.
gsgraber92 is offline   Reply With Quote
Old 12-09-2019, 08:08 PM   #176
Quarry Creeper
 
Join Date: Apr 2017
Location: Melbourne Australia
Posts: 404
Default Re: What RC parts have you 3D Printed????

Quote:
Originally Posted by gsgraber92 View Post
A little while back I posted some pics of the transmission I printed for my Wraith 1.9. Here is is finished. I redesigned the receiver box to accept the factory lid while helping conceal the electric motor. I modified the battery box to hide the battery so it looks cleaner under the hood. I tucked the front bumper in a bit more. Added reinforcement to the front end to make the frame more solid.




Sent from my iPhone using Tapatalk
Alright you have inspired me! I'm going to tackle my own scale trans for a new project. Rear engined tube buggy for C3.

Amazing work!

Sent from my LYA-L09 using Tapatalk
nedmo is offline   Reply With Quote
Old 01-04-2020, 10:23 PM   #177
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,817
Default Re: What RC parts have you 3D Printed????

Quote:
Originally Posted by JSterrett View Post
Unfortunately I ran out of red filament just before it finished, so I'll have to paint it when it's all done, but here's the progress so far. Just have a bunch of drawers to print...





Sent from my SM-G970U using Tapatalk
Beautiful Job!
mikemcE is offline   Reply With Quote
Old 01-18-2020, 08:54 PM   #178
Rock Crawler
 
Join Date: Jul 2016
Location: Southern Oregon
Posts: 767
Default Re: What RC parts have you 3D Printed????

Newest project. This is just a render from Fusion 360, need to reorder filament so I can print it out...



Sent from my SM-G970U using Tapatalk
JSterrett is offline   Reply With Quote
Old 01-18-2020, 09:00 PM   #179
I wanna be Dave
 
Join Date: Jun 2017
Location: Humboldt county
Posts: 4,475
Default Re: What RC parts have you 3D Printed????

That looks nice! Do you ever share you designs anywhere?
HumboldtEF is offline   Reply With Quote
Old 01-19-2020, 01:14 AM   #180
Quarry Creeper
 
Join Date: May 2019
Location: North Highlands
Posts: 483
Default Re: What RC parts have you 3D Printed????

Did a snap on bun for the Dlux Cheez Berger the other day. Here's a few pics. Also did a version with a shelf for the ESC that was the one I ended up using but I haven't gotten a pic yet, I'll try to grab one later.

https://www.thingiverse.com/thing:4105470




punkindrublik is offline   Reply With Quote
Reply



What RC parts have you 3D Printed???? - Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Printed Ascender Parts robertjpjr Vaterra Ascender 7 12-27-2017 09:39 PM
3D Printed Parts monkeyracing Tamiya XC/CC01 5 05-29-2015 10:20 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com