RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Tools, and Procedures (http://www.rccrawler.com/forum/tools-procedures/)
-   -   What RC parts have you 3D Printed???? (http://www.rccrawler.com/forum/tools-procedures/596394-what-rc-parts-have-you-3d-printed.html)

vwdaveb 03-09-2018 02:28 PM

What RC parts have you 3D Printed????
 
Been wanting to start a thread to show other enthusiast what I have printed for my RC vehicles. I'd like to see everyone share what they have printed at home themselves vs Shapeaways. Let's just share what the part is if you design, remixed, or just found the file on a sharing site.


Here's some inner beadloc caps (don't know what to call them) I made for my Jeep Trailcat project.

https://lh3.googleusercontent.com/Bb...9=w803-h949-no

They are held in place with magnets. There is a ring that sets under the Beadloc, and then magnets that are in the Cat cap.

https://lh3.googleusercontent.com/xx...L=w919-h949-no

vwdaveb 03-09-2018 02:30 PM

Re: What RC parts have you 3D Printed????
 
And a hood type piece I made, with light, for my Comp Crawler.
https://lh3.googleusercontent.com/XB...=w1266-h949-no
https://lh3.googleusercontent.com/OS...7=w712-h949-no

vwdaveb 03-09-2018 02:38 PM

Re: What RC parts have you 3D Printed????
 
A high center Gearbox mount for my SCX10, that I modified to use it for the transfer case. This one still needs some tweaking.
https://lh3.googleusercontent.com/d9...4=w712-h949-no

https://lh3.googleusercontent.com/yM...=w1008-h949-no

vwdaveb 03-09-2018 02:39 PM

Re: What RC parts have you 3D Printed????
 
A Snorkel for the Jeep. Smoothing this out with some model putty. Got this file online.https://lh3.googleusercontent.com/p8...1=w712-h949-no

vwdaveb 03-09-2018 02:42 PM

Re: What RC parts have you 3D Printed????
 
A CMS for one of the SCX10's, another file I got online.

https://lh3.googleusercontent.com/Wk...U=w712-h949-no

It was printed in blue pla then painted black.

https://lh3.googleusercontent.com/s2...b=w782-h949-no

vwdaveb 03-09-2018 02:44 PM

Re: What RC parts have you 3D Printed????
 
SCX10 Shock https://lh3.googleusercontent.com/4O...Q=w802-h950-notowers that I hate, back to the drawing board, or Fusion 360.

Chris81 03-09-2018 05:24 PM

Re: What RC parts have you 3D Printed????
 
New body mount. It's a unimog body and didn't want holes in the hood. So I glued magnets to the inside of the grill and the stick to the mount. I've also made a low profile skid and upper link mounts all for the ascender platform.https://uploads.tapatalk-cdn.com/201...3394d3e179.jpg

Sent from my SM-G900V using Tapatalk

DeeJay73 03-10-2018 10:22 AM

Re: What RC parts have you 3D Printed????
 
A few 3d engines. And other various parts. https://uploads.tapatalk-cdn.com/201...c02611672d.jpg


Sent from my iPhone using Tapatalk

Tamiya1970 03-10-2018 12:01 PM

Re: What RC parts have you 3D Printed????
 
Some wheels and assesoires for my scratchbuild Kirovets K700 tracktor.
Scaler.https://uploads.tapatalk-cdn.com/201...600b7f99f6.jpghttps://uploads.tapatalk-cdn.com/201...732a38abfd.jpghttps://uploads.tapatalk-cdn.com/201...092cf1dd8a.jpghttps://uploads.tapatalk-cdn.com/201...7ff4306320.jpghttps://uploads.tapatalk-cdn.com/201...89e92df7de.jpghttps://uploads.tapatalk-cdn.com/201...53be1447b2.jpg

Verstuurd vanaf mijn BV7000 PRO met Tapatalk
https://uploads.tapatalk-cdn.com/201...36d286df08.jpg

JatoTheRipper 03-10-2018 02:24 PM

Re: What RC parts have you 3D Printed????
 
I've done a bunch.

Traffic cones:
https://farm5.staticflickr.com/4216/...118dabcb_b.jpg

Grave Digger bumper:
https://farm5.staticflickr.com/4250/...92980b10_b.jpg

Ford F-150 OEM wheels:
https://farm5.staticflickr.com/4239/...8db2846e_b.jpg

Wheel insert for JConcepts and Proline monster truck wheels:
https://farm5.staticflickr.com/4255/...41e072c0_b.jpg
https://farm5.staticflickr.com/4202/...2b7506be_b.jpg

RC stand with Axial logo:
https://farm5.staticflickr.com/4284/...dcf8be22_b.jpg

Wheel inserts for Traxxas Slash rims - meant for dirt oval cars:
https://farm5.staticflickr.com/4218/...4ba903b2_b.jpg
https://farm5.staticflickr.com/4257/...33d08d2c_b.jpg

Scale air cleaner for dirt oval cars:
https://farm5.staticflickr.com/4219/...baeabdaa_b.jpg

Tossedman 03-10-2018 03:42 PM

Re: What RC parts have you 3D Printed????
 
A roof rack

http://www.rccrawler.com/forum/membe...4417-65425.jpg

An engine

http://www.rccrawler.com/forum/membe...4417-65407.jpg

And a front bumper

http://www.rccrawler.com/forum/membe...4417-65138.jpg

vwdaveb 03-11-2018 10:36 AM

Re: What RC parts have you 3D Printed????
 
Did u design the Westy rack?

Sent from my SM-N950U using Tapatalk

Tossedman 03-11-2018 10:55 AM

Re: What RC parts have you 3D Printed????
 
Found it on the SketchUp 3D Warehouse. Modified it a bit and had it printed.

BigSki 03-11-2018 01:19 PM

Re: What RC parts have you 3D Printed????
 
Over the past week I designed/modeled and printed a few parts for my Dolt.
http://www.rccrawler.com/forum/membe...3008-65444.jpg
http://www.rccrawler.com/forum/membe...3008-65446.jpg
Yes, I can see that it rubs ever so slightly. I don't care, I'll just call it 'self machining' :mrgreen:

Generic battery box for a 1350 3S.
http://www.rccrawler.com/forum/membe...3008-65443.jpg

I'm working on a grill for the Dolt and a few other small parts that probably already exist, but I need the practice w/ Solidworks and the printers that I use have a minimal access fee.

Ty@Tekin 03-12-2018 11:13 AM

Re: What RC parts have you 3D Printed????
 
Printed this whole truck other than the frame rails and running gear.

http://scalebuildersguild.com/forum/...6&d=1517871484

vwdaveb 09-01-2018 04:07 PM

Re: What RC parts have you 3D Printed????
 
Surely there is more folks printing parts. I'm getting back to it this week.

Sent from my SM-N950U using Tapatalk

svt923 09-04-2018 08:41 AM

Re: What RC parts have you 3D Printed????
 
This is one of my recent prints.

https://i.imgur.com/qEZpHF6l.jpg

It's an Axial skidplate from Thingiverse remixed to mount a Ebay 1:1 transfer case.

JSterrett 09-12-2018 07:14 PM

Re: What RC parts have you 3D Printed????
 
Rear pivot mount for my daughter's honcho...

https://uploads.tapatalk-cdn.com/201...d1ddd82113.jpg
https://uploads.tapatalk-cdn.com/201...3b4829448c.jpg

Skid for my B1B bomber...

https://uploads.tapatalk-cdn.com/201...bfe0bdfb98.jpg

Wire tie-down / holder for my wraith...

https://uploads.tapatalk-cdn.com/201...74c76c370d.jpg

Inner fenders and rear deck for my Wraith (thingiverse files)...

https://uploads.tapatalk-cdn.com/201...4859314fb1.jpg

ESC mount for my Wraith...

https://uploads.tapatalk-cdn.com/201...701180310d.jpg
https://uploads.tapatalk-cdn.com/201...ec807bce02.jpg
https://uploads.tapatalk-cdn.com/201...54f2181e2f.jpg

Sent from my SM-G930V using Tapatalk

JSterrett 09-12-2018 07:24 PM

Re: What RC parts have you 3D Printed????
 
Pin bushings for my Exo...

https://uploads.tapatalk-cdn.com/201...fa4e0d24ac.jpg
https://uploads.tapatalk-cdn.com/201...dfb43a0dff.jpg

A hinged box and some other scale items found on thingiverse...

https://uploads.tapatalk-cdn.com/201...f4e30ab195.jpg
https://uploads.tapatalk-cdn.com/201...a64e2d4da6.jpg

Spacers for some Vanquish SLW wheels I got in a trade, too narrow for my tastes so I made some spacers to widen them out...

https://uploads.tapatalk-cdn.com/201...a25b1967a5.jpg
https://uploads.tapatalk-cdn.com/201...a8fca1964c.jpg
https://uploads.tapatalk-cdn.com/201...8c3f23325a.jpg

Beadlock wheels for my cheapo WPL C14

https://uploads.tapatalk-cdn.com/201...7ece68aa55.jpg
https://uploads.tapatalk-cdn.com/201...b2182b27b0.jpg

Sent from my SM-G930V using Tapatalk

JSterrett 09-12-2018 07:32 PM

Re: What RC parts have you 3D Printed????
 
Beadlock rings and a link mount for my Redcat RS10...

https://uploads.tapatalk-cdn.com/201...372b7169c3.jpg
https://uploads.tapatalk-cdn.com/201...9af324e3c3.jpg

Sent from my SM-G930V using Tapatalk


All times are GMT -6. The time now is 08:58 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com