RCCrawler Forums

vwdaveb · 03-09-2018, 02:28 PM

Been wanting to start a thread to show other enthusiast what I have printed for my RC vehicles. I'd like to see everyone share what they have printed at home themselves vs Shapeaways. Let's just share what the part is if you design, remixed, or just found the file on a sharing site.

Here's some inner beadloc caps (don't know what to call them) I made for my Jeep Trailcat project.

They are held in place with magnets. There is a ring that sets under the Beadloc, and then magnets that are in the Cat cap.

vwdaveb · 03-09-2018, 02:30 PM

And a hood type piece I made, with light, for my Comp Crawler.

vwdaveb · 03-09-2018, 02:38 PM

A high center Gearbox mount for my SCX10, that I modified to use it for the transfer case. This one still needs some tweaking.

vwdaveb · 03-09-2018, 02:39 PM

A Snorkel for the Jeep. Smoothing this out with some model putty. Got this file online.

vwdaveb · 03-09-2018, 02:42 PM

A CMS for one of the SCX10's, another file I got online.

It was printed in blue pla then painted black.

vwdaveb · 03-09-2018, 02:44 PM

SCX10 Shock

towers that I hate, back to the drawing board, or Fusion 360.

Chris81 · 03-09-2018, 05:24 PM

New body mount. It's a unimog body and didn't want holes in the hood. So I glued magnets to the inside of the grill and the stick to the mount. I've also made a low profile skid and upper link mounts all for the ascender platform.

Sent from my SM-G900V using Tapatalk

DeeJay73 · 03-10-2018, 10:22 AM

A few 3d engines. And other various parts.

Sent from my iPhone using Tapatalk

Tamiya1970 · 03-10-2018, 12:01 PM

Some wheels and assesoires for my scratchbuild Kirovets K700 tracktor.
Scaler.

Verstuurd vanaf mijn BV7000 PRO met Tapatalk

JatoTheRipper · 03-10-2018, 02:24 PM

I've done a bunch.

Traffic cones:

Grave Digger bumper:

Ford F-150 OEM wheels:

Wheel insert for JConcepts and Proline monster truck wheels:

RC stand with Axial logo:

Wheel inserts for Traxxas Slash rims - meant for dirt oval cars:

Scale air cleaner for dirt oval cars:

Tossedman · 03-10-2018, 03:42 PM

A roof rack

An engine

And a front bumper

vwdaveb · 03-11-2018, 10:36 AM

Quote:

Originally Posted by Tossedman

A roof rack

An engine

And a front bumper

Did u design the Westy rack?

Sent from my SM-N950U using Tapatalk

Tossedman · 03-11-2018, 10:55 AM

Found it on the SketchUp 3D Warehouse. Modified it a bit and had it printed.

BigSki · 03-11-2018, 01:19 PM

Over the past week I designed/modeled and printed a few parts for my Dolt.

Yes, I can see that it rubs ever so slightly. I don't care, I'll just call it 'self machining'

Generic battery box for a 1350 3S.

I'm working on a grill for the Dolt and a few other small parts that probably already exist, but I need the practice w/ Solidworks and the printers that I use have a minimal access fee.

Ty@Tekin · 03-12-2018, 11:13 AM

Printed this whole truck other than the frame rails and running gear.

vwdaveb · 09-01-2018, 04:07 PM

Surely there is more folks printing parts. I'm getting back to it this week.

Sent from my SM-N950U using Tapatalk

svt923 · 09-04-2018, 08:41 AM

This is one of my recent prints.

It's an Axial skidplate from Thingiverse remixed to mount a Ebay 1:1 transfer case.

JSterrett · 09-12-2018, 07:14 PM

Rear pivot mount for my daughter's honcho...

Skid for my B1B bomber...

Wire tie-down / holder for my wraith...

Inner fenders and rear deck for my Wraith (thingiverse files)...

ESC mount for my Wraith...

Sent from my SM-G930V using Tapatalk

JSterrett · 09-12-2018, 07:24 PM

Pin bushings for my Exo...

A hinged box and some other scale items found on thingiverse...

Spacers for some Vanquish SLW wheels I got in a trade, too narrow for my tastes so I made some spacers to widen them out...

Beadlock wheels for my cheapo WPL C14

Sent from my SM-G930V using Tapatalk

JSterrett · 09-12-2018, 07:32 PM

Beadlock rings and a link mount for my Redcat RS10...

Sent from my SM-G930V using Tapatalk

03-09-2018, 02:28 PM	#1
vwdaveb Rock Stacker Join Date: Oct 2014 Location: Raeford Posts: 71	What RC parts have you 3D Printed???? Been wanting to start a thread to show other enthusiast what I have printed for my RC vehicles. I'd like to see everyone share what they have printed at home themselves vs Shapeaways. Let's just share what the part is if you design, remixed, or just found the file on a sharing site. Here's some inner beadloc caps (don't know what to call them) I made for my Jeep Trailcat project. They are held in place with magnets. There is a ring that sets under the Beadloc, and then magnets that are in the Cat cap.

03-09-2018, 02:30 PM	#2
vwdaveb Rock Stacker Join Date: Oct 2014 Location: Raeford Posts: 71	Re: What RC parts have you 3D Printed???? And a hood type piece I made, with light, for my Comp Crawler.

03-09-2018, 02:38 PM	#3
vwdaveb Rock Stacker Join Date: Oct 2014 Location: Raeford Posts: 71	Re: What RC parts have you 3D Printed???? A high center Gearbox mount for my SCX10, that I modified to use it for the transfer case. This one still needs some tweaking.

03-09-2018, 02:39 PM	#4
vwdaveb Rock Stacker Join Date: Oct 2014 Location: Raeford Posts: 71	Re: What RC parts have you 3D Printed???? A Snorkel for the Jeep. Smoothing this out with some model putty. Got this file online.

03-09-2018, 02:42 PM	#5
vwdaveb Rock Stacker Join Date: Oct 2014 Location: Raeford Posts: 71	Re: What RC parts have you 3D Printed???? A CMS for one of the SCX10's, another file I got online. It was printed in blue pla then painted black.

03-09-2018, 02:44 PM	#6
vwdaveb Rock Stacker Join Date: Oct 2014 Location: Raeford Posts: 71	Re: What RC parts have you 3D Printed???? SCX10 Shock towers that I hate, back to the drawing board, or Fusion 360.

03-09-2018, 05:24 PM	#7
Chris81 Quarry Creeper Join Date: Jan 2016 Location: US Posts: 401	Re: What RC parts have you 3D Printed???? New body mount. It's a unimog body and didn't want holes in the hood. So I glued magnets to the inside of the grill and the stick to the mount. I've also made a low profile skid and upper link mounts all for the ascender platform. Sent from my SM-G900V using Tapatalk

03-10-2018, 10:22 AM	#8
DeeJay73 Rock Stacker Join Date: Aug 2013 Location: Kamloops BC. Canada Posts: 95	Re: What RC parts have you 3D Printed???? A few 3d engines. And other various parts. Sent from my iPhone using Tapatalk

03-10-2018, 12:01 PM	#9
Tamiya1970 Newbie Join Date: May 2012 Location: Netherlands Posts: 1	Re: What RC parts have you 3D Printed???? Some wheels and assesoires for my scratchbuild Kirovets K700 tracktor. Scaler. Verstuurd vanaf mijn BV7000 PRO met Tapatalk

03-10-2018, 02:24 PM	#10
JatoTheRipper I wanna be Dave Join Date: Sep 2008 Location: PA Posts: 10,299	Re: What RC parts have you 3D Printed???? I've done a bunch. Traffic cones: Grave Digger bumper: Ford F-150 OEM wheels: Wheel insert for JConcepts and Proline monster truck wheels: RC stand with Axial logo: Wheel inserts for Traxxas Slash rims - meant for dirt oval cars: Scale air cleaner for dirt oval cars:

03-10-2018, 03:42 PM	#11
Tossedman RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North Posts: 1,156	Re: What RC parts have you 3D Printed???? A roof rack An engine And a front bumper

03-11-2018, 10:55 AM	#13
Tossedman RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North Posts: 1,156	Re: What RC parts have you 3D Printed???? Found it on the SketchUp 3D Warehouse. Modified it a bit and had it printed.

03-11-2018, 01:19 PM	#14
BigSki I wanna be Dave Join Date: May 2008 Location: Baltimore Posts: 4,405	Re: What RC parts have you 3D Printed???? Over the past week I designed/modeled and printed a few parts for my Dolt. Yes, I can see that it rubs ever so slightly. I don't care, I'll just call it 'self machining' Generic battery box for a 1350 3S. I'm working on a grill for the Dolt and a few other small parts that probably already exist, but I need the practice w/ Solidworks and the printers that I use have a minimal access fee. Last edited by BigSki; 03-11-2018 at 01:21 PM.

03-12-2018, 11:13 AM	#15
Ty@Tekin Building all the things Join Date: Feb 2008 Location: Tekin, ID Posts: 1,881	Re: What RC parts have you 3D Printed???? Printed this whole truck other than the frame rails and running gear.

09-01-2018, 04:07 PM	#16
vwdaveb Rock Stacker Join Date: Oct 2014 Location: Raeford Posts: 71	Re: What RC parts have you 3D Printed???? Surely there is more folks printing parts. I'm getting back to it this week. Sent from my SM-N950U using Tapatalk

Sponsored Links

What RC parts have you 3D Printed???? - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3D Printed Ascender Parts	robertjpjr	Vaterra Ascender	7	12-27-2017 09:39 PM
3D Printed Parts	monkeyracing	Tamiya XC/CC01	5	05-29-2015 10:20 AM

09-04-2018, 08:41 AM	#17
svt923 I wanna be Dave Join Date: Jan 2005 Location: Raleigh-ish vicinity Posts: 3,109	Re: What RC parts have you 3D Printed???? This is one of my recent prints. It's an Axial skidplate from Thingiverse remixed to mount a Ebay 1:1 transfer case.

09-12-2018, 07:14 PM	#18
JSterrett Quarry Creeper Join Date: Jul 2016 Location: Southern Oregon Posts: 419	Re: What RC parts have you 3D Printed???? Rear pivot mount for my daughter's honcho... Skid for my B1B bomber... Wire tie-down / holder for my wraith... Inner fenders and rear deck for my Wraith (thingiverse files)... ESC mount for my Wraith... Sent from my SM-G930V using Tapatalk Last edited by JSterrett; 09-12-2018 at 07:20 PM.

09-12-2018, 07:24 PM	#19
JSterrett Quarry Creeper Join Date: Jul 2016 Location: Southern Oregon Posts: 419	Re: What RC parts have you 3D Printed???? Pin bushings for my Exo... A hinged box and some other scale items found on thingiverse... Spacers for some Vanquish SLW wheels I got in a trade, too narrow for my tastes so I made some spacers to widen them out... Beadlock wheels for my cheapo WPL C14 Sent from my SM-G930V using Tapatalk Last edited by JSterrett; 09-12-2018 at 07:28 PM.

09-12-2018, 07:32 PM	#20
JSterrett Quarry Creeper Join Date: Jul 2016 Location: Southern Oregon Posts: 419	Re: What RC parts have you 3D Printed???? Beadlock rings and a link mount for my Redcat RS10... Sent from my SM-G930V using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

RCCrawler Forums

Thread: What RC parts have you 3D Printed????