|
| LinkBack | Thread Tools | Display Modes |
09-16-2007, 07:10 PM | #1 |
Rock Stacker Join Date: Sep 2007 Location: Springport
Posts: 50
| stampede drive shafts to tlt axles mod? im putting my drive shafts in and i put the pede tranny in and i bought front and rear drive shafts and i need a pic of how to make them fit tlt axles..someone? |
Sponsored Links | |
09-17-2007, 07:41 AM | #2 |
Quarry Creeper Join Date: Apr 2006 Location: Pittsburgh
Posts: 412
| There shouldn't be an issue the shafts and yokes are a direct fit. Just cut off the the stub end on one yoke for the tranny end.
Last edited by DRCMAN; 09-17-2007 at 10:36 AM. |
09-17-2007, 06:36 PM | #3 |
Rock Crawler Join Date: Feb 2006 Location: Easthampton
Posts: 747
|
He's talking about how the Tlt pinion has only one flat spot on it, while the pede shafts have 2 flat spots. Either grind another flat spont on the pinion or take a Dremel and take away one the flats inside the yoke. |
09-17-2007, 06:39 PM | #4 |
I wanna be Dave Join Date: May 2006 Location: Arlington, VA
Posts: 3,377
|
I'd do a second flat spot and cross drill the TLT pinion.
|
09-19-2007, 08:22 PM | #5 |
Quarry Creeper Join Date: Sep 2005 Location: Sydney, Australia
Posts: 373
|
drill the yoke stright through. and cross pin it on the axel
|
Thread Tools | |
Display Modes | |
| |