Go Back   RCCrawler Forums > RCCrawler General Tech > Tools, and Procedures
Loading

Notices

Thread: DIY CNC Machine...???

Reply
 
LinkBack Thread Tools Display Modes
Old 12-23-2007, 03:28 PM   #1
Newbie
 
Join Date: Dec 2007
Location: Cincinnati
Posts: 4
Default DIY CNC Machine...???

I've searched and found nothing on this site regarding this so I thought I'd throw it up. If it shouldn't be here please remove. (Like I had to give permission for this to happen)

So I've spent way too much already. Don't want (or have) to spend another *** load to be able to build my own stuff.
So I went searching around for a more cost effective alternative and stumbled across this.
Edited tonight - The guy builds it out of galvanized pipe, plexiglass, aluminum channel, stepper motors, and all thread.

http://www.instructables.com/id/Easy...lling-Machine/

It shows how to construct the machine portion of a CNC set up. I'm sure the accuracy, speed, power are no where near a commercially availabe unit but neither is the cost. This part should be pretty inexpensive. You can get the CNC software for free or cheap. Now to find out how to interface the machine and software...

So what do you think about it?

Last edited by Ap0k; 12-23-2007 at 05:35 PM.
Ap0k is offline   Reply With Quote
Sponsored Links
Old 12-23-2007, 07:26 PM   #2
Rock Stacker
 
Join Date: Sep 2007
Location: French #70 living in Toyohashi
Posts: 67
Default

Go there:

http://www.cnczone.com/forums/

Do a search on Joe's CNC

It's free plan for a real popular DIY CNC.

For the motor and interface, new it's around 400 USD + computer

Need a good dremel too
Coligny is offline   Reply With Quote
Old 12-25-2007, 03:36 AM   #3
Newbie
 
Join Date: Dec 2007
Location: Cincinnati
Posts: 4
Default

That looks like an awesome machine. I think I would need a CNC machine to build that CNC machine.

Gonna look at it some more later. The huge pile of presents is calling my name.



May your chassis be stiff, lines be true, suspension work great and tires stick like glue. Merry Christmas.
Ap0k is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 01:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com