| |
12-22-2008, 04:17 PM
| #21 |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
| 
I've had a few requests for some other sizes. Tomorrow morning I'll be running out the last of my material thru the machine. I could run some for 3/8" diameter link and using the same 3mm tap pilot hole (#39/#40 drill). If there is any interest in this size just post up here and I'll make some. I may only be making around 50 or so of this size. |
|  |
| Sponsored Links | |
| | |
|
12-22-2008, 09:04 PM
| #22 |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
| Small price adjustment
Unfortunately I need to make a small price adjustment. No effect on those who have already paid. Due to the nature of shipping I must ship as a parcel, something I didn't expect and double the price I did expect. I'm sorry I'm such a newb at this! But, I will somewhat sweetin' the deal. Here's the new price. One bushing for $7.50 shipped, a small increase but an increase non the less. Two bushings for $12 shipped. This way if you want to dedicate one of these bushings to a larger size pilot you can just drill it out..............drill from the 3/16" side (.125" for 4mm threads). I'm sorry for my learning curve. The original post will reflect the new prices. |
|
| |
|
12-22-2008, 09:14 PM
| #23 | |
| MODERHATER™   Join Date: Nov 2005 Location: Colorado
Posts: 10,939
| Quote:
| |
|
| |
|
12-23-2008, 12:19 PM
| #24 |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
|
All paids have mailed out this morning, First Class USPS. 3/8" by 4mm, I am running a very limited quantity of these right now. The recommended drill diameter for 4mm thread is .1299. I am drilling these for .125", it makes it much easier and tapping delrin with a smaller hole is even better, you'll get a 100% thread. Same prices. No plans for a 1/2" by 4mm bushing yet. |
|
| |
|
12-23-2008, 12:25 PM
| #25 |
| RCC Addict  Join Date: May 2008 Location: Green Bay
Posts: 1,138
|
Thanks for the update....I look forward to getting it in the mail  |
|
| |
|
12-23-2008, 01:20 PM
| #26 |
| I wanna be Dave Join Date: Sep 2005 Location: USA
Posts: 11,196
|
Any 1/4in Bushings?
|
|
| |
|
12-25-2008, 12:12 PM
| #27 |
| RCC Addict Join Date: Jun 2007 Location: Indian Village Pontiac
Posts: 1,910
|
do you have any of the 5/16' left?? and how about the 1/4" as run2jeep mentioned?? that would be VERY nice to have both sizes since I do both!!
|
|
| |
|
12-25-2008, 12:15 PM
| #28 |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
|
I have plenty of 5/16" by 3mm and a dozen 3/8" by 4mm. I don't have any 1/4" but it would be simple to make either work with tubing as a bushing liner.
|
|
| |
|
12-29-2008, 04:24 PM
| #29 |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
|
All 'paids' shipped today. I have approx 150 pieces of the 5/16" by 3mm bushings and 10 pieces of the 3/8" by 4mm bushing. |
|
| |
|
12-29-2008, 06:30 PM
| #30 |
| I wanna be Dave Join Date: Dec 2006 Location: In Cali.
Posts: 4,109
|
Got mine. Love it....thanks!!
|
|
| |
|
12-29-2008, 09:44 PM
| #31 |
| Quarry Creeper Join Date: Sep 2008 Location: So.Orange County
Posts: 266
|
Got my bushing too!! looks great (sitting on the shelf), just wish Mcmaster would ship faster.
|
|
| |
|
12-30-2008, 09:28 AM
| #32 |
| RCC Addict Join Date: Jan 2008 Location: Mount Juliet
Posts: 1,287
|
Got mine in the mail yesterday. Nicely made....perfect fit over the 5/16" delrin stock. Perfect.
|
|
| |
|
01-01-2009, 01:17 AM
| #33 |
| I wanna be Dave Join Date: Sep 2005 Location: USA
Posts: 11,196
|
How do we order?
|
|
| |
|
01-01-2009, 02:21 PM
| #34 |
| Quarry Creeper Join Date: Mar 2008 Location: Raleigh, NC
Posts: 441
|
Great idea ! you got a PM, just need paypal address to sent payment to .
|
|
| |
|
01-01-2009, 02:30 PM
| #35 | |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
| Quote:
Thanks, Doug | |
|
| |
|
01-02-2009, 06:19 PM
| #36 |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
|
Most recent 'paids' shipped out today. Berg owners.......look for a new tool in the Vendors Market or in my sig later tonight. It'll make clocking your axles much easier.  |
|
| |
|
01-02-2009, 10:49 PM
| #37 |
| I wanna be Dave Join Date: Mar 2008 Location: Pacific Ocean
Posts: 2,342
|
I used this for all the links I made today. All my lower links are 4mm and it was no problem using the smaller hole as a pilot for the 4mm hole. I just put the 4mmx25mm cap head screw in the drill and tapped it into the link. Then cut the cap head off with a Dremal and screwed the rod end on. Piece of cake. Last edited by dpdsurf; 01-02-2009 at 11:31 PM. |
|
| |
|
01-02-2009, 11:04 PM
| #38 |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
|
Saweet! |
|
| |
|
01-03-2009, 12:54 AM
| #39 |
| TEAM RCC   Join Date: Jul 2006 Location: Novato
Posts: 1,493
|
sound like i need a new tool
|
|
| |
|
01-05-2009, 10:04 PM
| #40 |
| RCC Addict Join Date: Mar 2008 Location: SSF
Posts: 1,614
|
All recent "paids" went out today
|
|
| |
 |
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/tools-supplies/150200-link-drill-bushing.html | ||||
| Posted By | For | Type | Date | |
| Chassis Project-Update(1/12/2013) - Page 2 | This thread | Refback | 03-01-2013 12:52 AM | |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
