| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
08-04-2014, 01:46 PM
| #1 |
| Newbie Join Date: Jul 2014 Location: Torrance
Posts: 24
|  Does anyone make a 5.5mm hobby Wrench??
Does anyone make a 5.5mm hobby wrench?? Seems like it is impossible to get to the lock nuts that hold on the links of my scx10 with the "T Wrench" or nut drivers. Would hate to use pliers and mess up the nuts over time. The Forum wont let me respond with a reply: I ended up purchasing a 5.5mm and 7mm from McMaster Carr - It is an Armstrong Polished Professional, they were about 9 Dollars each. Last edited by dms1; 08-13-2014 at 01:08 AM. Reason: Couldn't use the reply button. |
|  |
| Sponsored Links | |
| | |
|
08-04-2014, 02:11 PM
| #2 |
| RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North
Posts: 1,373
| Re: Does anyone make a 5.5mm hobby Wrench??
I've got this little Armstrong wrench. Way better than the team associated one.  I also have this set from Sears. Craftsman 10 pc. Metric Combination Ignition Wrench Set I sometimes put a small piece of masking tape on the box end to hold the nut in a confined space until the threads start. Cheers eh, Todd Last edited by Tossedman; 08-04-2014 at 02:12 PM. Reason: Had a second thought... |
|
| |
|
08-04-2014, 04:22 PM
| #3 |
| Rock Stacker Join Date: Jan 2007 Location: Carson City
Posts: 68
| Re: Does anyone make a 5.5mm hobby Wrench??
Lowes has got their Kolbalt brand in a 5.5mm, runs $5 to $6. I just got one recently, has save me a lot of time. |
|
| |
|
08-04-2014, 07:41 PM
| #4 |
| I wanna be Dave  Join Date: Jul 2009 Location: Rancho Relaxo. California. USA. Earth.
Posts: 3,292
| Re: Does anyone make a 5.5mm hobby Wrench??
Vise grips for me and more nuts...
|
|
| |
|
08-04-2014, 08:05 PM
| #5 |
| owner, Holmes Hobbies LLC   Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Re: Does anyone make a 5.5mm hobby Wrench??
I have the craftsman set.
|
|
| |
|
08-04-2014, 08:28 PM
| #6 |
| Rock Crawler Join Date: May 2009 Location: Calgary
Posts: 911
| Re: Does anyone make a 5.5mm hobby Wrench??
Snap On also makes one. But you usually have to special order it and it's close to $25.  |
|
| |
|
08-04-2014, 11:52 PM
| #7 |
| I wanna be Dave Join Date: Dec 2009 Location: Outside DC
Posts: 2,997
| Re: Does anyone make a 5.5mm hobby Wrench??
x2 on the Craftsman set...and use some blue painter's tape on the closed end to hold your nuts in place. Best trick I ever taught my self!  |
|
| |
|
08-05-2014, 12:12 AM
| #8 |
| RCC Addict Join Date: Aug 2013 Location: Calgary - in the Great White North
Posts: 1,373
| Re: Does anyone make a 5.5mm hobby Wrench??
Tightie whities also hold your nuts in place. |
|
| |
|
08-21-2014, 05:57 PM
| #9 |
| Quarry Creeper Join Date: Dec 2009 Location: aurora
Posts: 344
| Re: Does anyone make a 5.5mm hobby Wrench??
buy the snap on wrench. I have all the other wrenches mentioned and have bought 6 fro my snap on guy and they are by far the best wrench of them all. the box end is taller buy about 2mm and the open end has a tighter tolerance than the others. my crapsmen set, the 5mm open end fits also and they are new in the bag. I am not trying to discount the others by any means. I am just trying to get you the best wrench for the money. btw, they are only about $10.00 a piece.
|
|
| |
|
Does anyone make a 5.5mm hobby Wrench?? - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| cross wrench? | 503dave | Tools, and Procedures | 4 | 02-15-2014 08:34 PM |
| The Crescent Wrench | @tw!ll | RC4WD Trail Finder 2 | 3 | 03-18-2012 09:41 PM |
| Scale wrench | bigal53021 | Scale Accessories | 3 | 01-30-2011 07:26 PM |
| Wrench sizes? | gopher | Tamiya TLT Crawlers | 1 | 04-19-2007 08:32 AM |
| |
Linear Mode
