Go Back   RCCrawler Forums > Vendors > Vendors Market > Tools and supplies
Loading

Notices

Thread: Berg Clocking Fixture, $20

Reply
 
LinkBack Thread Tools Display Modes
Old 01-15-2009, 04:22 AM   #41
Rock Crawler
 
Join Date: Sep 2007
Location: University City
Posts: 627
Default

what are the specs on the new version and will the price be the same? if so i may wait and see what the new version is before i order one of these bad boys...
nj05nismo is offline   Reply With Quote
Sponsored Links
Old 01-15-2009, 03:34 PM   #42
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

Quote:
Originally Posted by nj05nismo View Post
what are the specs on the new version and will the price be the same? if so i may wait and see what the new version is before i order one of these bad boys...
The new version is the 'Ultimate Berg Clocker'. It will be the same cost but offer two different clocking angles, 20* and 30*. There will be no scribing for directions, the user will need to think about it before drilling.
I did this for the 30* rear clock and the 20* front clock which turns out damn perfect.
I clocked mine at 20* per side and it turned out awesome with the new chassis and links. I will add pics when mine is done, somewhere between tonight and Saturday.
I'm still waiting to hear from testers before I release this new version.
JeepinDoug is offline   Reply With Quote
Old 01-15-2009, 10:42 PM   #43
Rock Crawler
 
Stick King's Avatar
 
Join Date: Dec 2005
Location: Connellsville PA."fayettenam" lol
Posts: 739
Default i order i set

Quote:
Originally Posted by MAMBAMAN View Post
I ORDER I SET
Quote:
Originally Posted by JeepinDoug View Post
You order you set?

What?

he is foreign. he is a little rusty on his english.
Stick King is offline   Reply With Quote
Old 01-15-2009, 11:07 PM   #44
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

Quote:
Originally Posted by StIcK kInG View Post
he is foreign. he is a little rusty on his english.
LOL, I thought it was a few too many brews.
Got your order, thanks.
JeepinDoug is offline   Reply With Quote
Old 01-21-2009, 08:08 PM   #45
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

JeepinDoug's giveaway

Buy a star and support the board!!!
JeepinDoug is offline   Reply With Quote
Old 01-24-2009, 10:35 AM   #46
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

Recent orders shipped yesterday, Thx
JeepinDoug is offline   Reply With Quote
Old 01-24-2009, 10:03 PM   #47
Newbie
 
Join Date: Oct 2008
Location: Ogden
Posts: 1
Default Ultimate Berg Clocker

Hello, I was wondering if I could hook up with a set?

Thank you. Mykel
M`honri is offline   Reply With Quote
Old 01-25-2009, 05:45 AM   #48
Quarry Creeper
 
Join Date: May 2005
Location: Crossville,TN
Posts: 363
Default

Sent you a PM and waiting on the new model.

Carl
quickster47 is offline   Reply With Quote
Old 01-26-2009, 09:32 AM   #49
Rock Stacker
 
Join Date: Sep 2005
Location: prescott
Posts: 75
Default Great Job

Will the drill bushing work on hot racing axils?
rude_k9 is offline   Reply With Quote
Old 01-26-2009, 02:12 PM   #50
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

Quote:
Originally Posted by rude_k9 View Post
Will the drill bushing work on hot racing axils?
I don't know, I never held an HR axle in my hand. I have heard they are the same, but I wouldn't bet the farm on it until I had the chance to measure one.
JeepinDoug is offline   Reply With Quote
Old 01-28-2009, 09:36 PM   #51
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

All inquiring PMs have been returned.
All recent shipments went out today except for a couple that may have come in late last night, in which they will go out with the next shipment on Saturday.
JeepinDoug is offline   Reply With Quote
Old 02-04-2009, 07:01 PM   #52
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

The most recent orders went out today.
JeepinDoug is offline   Reply With Quote
Old 02-06-2009, 09:42 PM   #53
Rock Crawler
 
Join Date: May 2008
Location: Mansfield, PA
Posts: 560
Default

JeepinDoug, I just wanted to say that I just got done clocking 3 berg axles with your "clocking fixture" and it worked wonderful. What a sweet fixture, thanks for making such a helpful product
Trugg is offline   Reply With Quote
Old 02-06-2009, 10:50 PM   #54
Quarry Creeper
 
Join Date: Aug 2008
Location: Yuma
Posts: 211
Default

I just did my Berg today. Your tool is the best money I have spent in RC to date. Thanks
tedmales is offline   Reply With Quote
Old 02-07-2009, 12:01 AM   #55
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

Awesome, thanks guys.
JeepinDoug is offline   Reply With Quote
Old 02-07-2009, 08:07 PM   #56
I wanna be Dave
 
Join Date: Mar 2008
Location: Pacific Ocean
Posts: 2,342
Default

Yep I agree guys, I finally got around to doing the rear axle tonight. This tool makes the job so much less itimidating. Genius!
dpdsurf is offline   Reply With Quote
Old 02-11-2009, 08:30 PM   #57
TEAM RCC
 
bcrofts's Avatar
 
Join Date: Jul 2006
Location: Novato
Posts: 1,493
Default

hey doug i just sent you a pm about the tool thanks
bcrofts is offline   Reply With Quote
Old 02-12-2009, 03:32 PM   #58
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

Sorry guys, I've been sick with a head cold the past few days. All recent PMs have been returned.
JeepinDoug is offline   Reply With Quote
Old 02-13-2009, 03:43 PM   #59
RCC Addict
 
Join Date: Mar 2008
Location: SSF
Posts: 1,614
Default

All orders shipped today.

I have one new drill guide available, 1/4" x 3mm (#39 drill).

Also I'm ready to release the Ultimate Berg Clocker.

This clocker will allow you to clock two different angles, 20* and 30*.
The 20* is perfect for the front, it leaves no mods for steering.
The 30* is perfect for the rear, more clock, less link length.
This clocker gives you options though, if you think you want the 30* in the rear and then change your mind, you could just do the 20* or buy a pair of new tubes and have the option to change.

You must double check your work before drilling the tubes, these are not marked for sides.
Because of the extra work in these, I need to adjust the price. I make these on hand machines, not CNC.

$21.50 for the Ult Clocker
Not a bad increase considering.

I do still have several 20*s, a few 25*s and a few 30*s.
JeepinDoug is offline   Reply With Quote
Old 02-13-2009, 04:22 PM   #60
RCC Addict
 
Join Date: Jan 2009
Location: Sebastopol CA
Posts: 1,525
Default

oh shoot. I thought those were already out when I ordered. *smacks self*
BigB_117 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com