Go Back   RCCrawler Forums > Vendors > Vendors Market > Tools and supplies
Loading

Notices

Thread: RC Vehicle Work & Storage Stand

Reply
 
LinkBack Thread Tools Display Modes
Old 04-05-2014, 10:55 AM   #1
Rock Crawler
 
Join Date: Feb 2014
Location: ?
Posts: 747
Smile RC Vehicle Work & Storage Stand

*************Currently Out of Stock With No Restock Planned****************





Hi guys. New vendor here. I've been developing this Stand for several weeks and now that I have it dialed in I offer it here on RC Crawler Forums.

I'll detail the entire stand but let me start off by saying I developed this stand so I could design custom links. I made it fully adjustable but able to lock in place and secure to the threaded axles of the vehicle and be nutted off to give me fixed points of reference.

The stand was in constant use as I tinkered, maintained and stored my vehicle allowing me to rapidly improve it from hands on testing.

Videos below of my early units will outline the progression toward the production stand in this thread.

I use Chemcast GP Cell Cast 3/8" acrylic for the parts. I precision route, drill and slot the parts using templates, and heat form the parts using fixtures to ensure uniformity. I use top grade, aluminum, brass, nylon and stainless steel hardware to assemble it. I will detail all the parts below.

RC Vehicle Work Stand: $75 shipped Priority in the US, $100 shipped abroad.
Business PayPal Account and Email: rw_keeton@yahoo.com. Contact me here or by email to order. I prefer to send invoices.

The stand has one option at this time. The optional Base Plate and Fastener Set add $25 to the shipped cost due to size and weight.














Parts List for RC Vehicle Work Stand $75 Shipped in the US $100 Abroad:
2 Slotted Cell Cast Acrylic Plates 3/8" x 2.88" x 11.75"
4 Heat Formed Drilled and Tapped Cell Cast Acrylic Uprights fitting up to 8" diameter tires.
4 T6 Anodized Aluminum Axle Tabs
8 Brass 6-32 x 3/8" Thumb Screws
8 #6 Nylon Captive Washers
4 Stainless Steel 1/4-20 x 1-1/4" Carriage Bolts
4 1/4 Nylon Captive Washers
4 Brass 1/4-20 Thumb Nuts

Parts List for Optional Base Plate and Fastener Set Add $25 To Your Order:
1 Cell Cast Acrylic Slotted Base Plate 3/8" x 2.88" x 17.5"
2 Stainless Steel 1/4-20 x 1-1/4" Carriage Bolts
2 1/4 Nylon Captive Washers
2 Brass 1/4-20 Thumb Nuts

Contact me here or at rw_keeton@yahoo.com to place an order.

Last edited by MountainStorm; 10-26-2014 at 07:40 PM.
MountainStorm is offline   Reply With Quote
Sponsored Links
Old 04-05-2014, 02:17 PM   #2
Rock Crawler
 
Join Date: Feb 2014
Location: ?
Posts: 747
Default Re: RC Vehicle Work & Storage Stand


Current Production Version



Test Bed (Development Unit 2)



Prototype (Development Unit 1)
MountainStorm is offline   Reply With Quote
Reply



RC Vehicle Work & Storage Stand - Similar Threads
Thread Thread Starter Forum Replies Last Post
Kling-On RC vehicle storage racks Propane Vendors Market 5 04-07-2014 11:35 AM
Torque RC 1:10 RC Vehicle Ramp/Stand Set - 2 Piece tycoonman Scale parts 0 03-30-2014 04:45 PM
Vehicle Storage Rack by Kling-On RC Propane General Crawlers 0 12-08-2013 10:19 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 11:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com