RCCrawler Forums - RC Vehicle Work & Storage Stand

*************Currently Out of Stock With No Restock Planned****************

Hi guys. New vendor here. I've been developing this Stand for several weeks and now that I have it dialed in I offer it here on RC Crawler Forums.

I'll detail the entire stand but let me start off by saying I developed this stand so I could design custom links. I made it fully adjustable but able to lock in place and secure to the threaded axles of the vehicle and be nutted off to give me fixed points of reference.

The stand was in constant use as I tinkered, maintained and stored my vehicle allowing me to rapidly improve it from hands on testing.

Videos below of my early units will outline the progression toward the production stand in this thread.

I use Chemcast GP Cell Cast 3/8" acrylic for the parts. I precision route, drill and slot the parts using templates, and heat form the parts using fixtures to ensure uniformity. I use top grade, aluminum, brass, nylon and stainless steel hardware to assemble it. I will detail all the parts below.

RC Vehicle Work Stand: $75 shipped Priority in the US, $100 shipped abroad.
Business PayPal Account and Email: rw_keeton@yahoo.com. Contact me here or by email to order. I prefer to send invoices.

The stand has one option at this time. The optional Base Plate and Fastener Set add $25 to the shipped cost due to size and weight.

http://imagizer.imageshack.us/v2/800...0/841/ckmb.jpg
http://imagizer.imageshack.us/v2/800...0/513/8w7v.jpg
http://imagizer.imageshack.us/v2/800x600q90/22/d7ok.jpg
http://imagizer.imageshack.us/v2/800x600q90/62/1s1i.jpg
http://imagizer.imageshack.us/v2/800...0/534/q4cv.jpg
http://imagizer.imageshack.us/v2/800...0/819/ilx8.jpg
http://imagizer.imageshack.us/v2/800x600q90/31/h0wz.jpg
http://imagizer.imageshack.us/v2/800...0/849/h12j.jpg
http://imagizer.imageshack.us/v2/800...0/811/4i1z.jpg
http://imagizer.imageshack.us/v2/800...0/203/4abp.jpg
http://imagizer.imageshack.us/v2/800...0/845/6gdr.jpg
http://imagizer.imageshack.us/v2/800x600q90/24/mo8u.jpg

Parts List for RC Vehicle Work Stand $75 Shipped in the US $100 Abroad:
2 Slotted Cell Cast Acrylic Plates 3/8" x 2.88" x 11.75"
4 Heat Formed Drilled and Tapped Cell Cast Acrylic Uprights fitting up to 8" diameter tires.
4 T6 Anodized Aluminum Axle Tabs
8 Brass 6-32 x 3/8" Thumb Screws
8 #6 Nylon Captive Washers
4 Stainless Steel 1/4-20 x 1-1/4" Carriage Bolts
4 1/4 Nylon Captive Washers
4 Brass 1/4-20 Thumb Nuts

Parts List for Optional Base Plate and Fastener Set Add $25 To Your Order:
1 Cell Cast Acrylic Slotted Base Plate 3/8" x 2.88" x 17.5"
2 Stainless Steel 1/4-20 x 1-1/4" Carriage Bolts
2 1/4 Nylon Captive Washers
2 Brass 1/4-20 Thumb Nuts

Contact me here or at rw_keeton@yahoo.com to place an order.