RCCrawler Forums

smokinubyrc · 04-13-2006, 07:22 PM

well after playing with the tuber set up im deciding to make a diffrent chassie for more of a scale look and my bronko body is going over it i think it is going to be fun to make i bought a sheet of plexiglass and im going to see how well it works out
will post pics as it gose along as i have the next week of for spring break for school

lmk what u guys think thank you

Cole82 · 04-13-2006, 07:37 PM

Sounds like a good plan.

smokinubyrc · 04-13-2006, 07:44 PM

hear is my chassie design i dont think im going to be using the bronco instead my cadi escalade body

pic of my paint skills of my chassie done in like 3 mins

WestCoastPJ · 04-13-2006, 07:49 PM

a little small,but looks OK.what tranny would you be using?

smokinubyrc · 04-13-2006, 07:57 PM

it says it in the pic its going to be a stampede tranny on its side

smokinubyrc · 04-13-2006, 09:21 PM

half the chassie plate cut and almost done with sanding

the frunt of the chassie is the longer side of the nose facing that way>>>>>

smokinubyrc · 04-13-2006, 11:48 PM

ok chassie is done and bolted together
here are two pics

they are dark and sorry about that i will get better one after the sun comes up tomarrow

haha rcc in the background

bigred · 04-14-2006, 02:11 AM

Good luck with the Plexiglas, I've built a few and there a huge let down. You better brace it like HELL!!!.

I now stay away from building things that need to be relatively strong with the word "GLASS" in it.

I would suggest you use some lexan.

smokinubyrc · 04-14-2006, 10:20 AM

well it is 7/8 inch thick plexi
and i dont think it is going to need anymore braning than what it has i have to add maby one more an thats it

bigred · 04-14-2006, 12:59 PM

Quote:

Originally Posted by smokinu_by_rc

well it is 7/8 inch thick plexi
and i dont think it is going to need anymore braning than what it has i have to add maby one more an thats it

There's no way that's 7/8 thick, It looks more like 1/4". It WILL BRAKE!!

Also why is the tranny mounted so high up?.

smokinubyrc · 04-14-2006, 02:12 PM

becasue idk its they way i mounted it its not a comp rig by anymeans

so i really dont care about cog
and i went and tested the chassie today on some rock i just let the chassie fall down nothing but some scratches came froma 5 foot fall to a cement sidewalk i dont think it is going to break

smokinubyrc · 04-14-2006, 03:17 PM

its almost a rolling chassie and its going to sit right at 16 inches i think

smokinubyrc · 04-14-2006, 03:58 PM

ok its almost done all it needs is frunt drive line and a way to mount the body and a charged batt its sitting at 16.6 inches and i love it now to the pics

now artic shot i know someone is bound to ask its kinda forced that high but all three tires still touching

and a flat pic you can see the driveline hanging in the frunt lol

smokinubyrc · 04-14-2006, 04:42 PM

here is a quick body just siting on it cole hope you like the chassie is really strong and i dont think it is going to break

smokinubyrc · 04-14-2006, 07:23 PM

haha its alive it moves and it dose better than i expected i need to get a smaller pinion and im ready to go do anything anybody want to give me a 48 pitch 12 tooth pinion

anyway the body is mounted on the side by body post and yp frunt i is mounted by vecro but it might change i dont know

edit: their is no torque twist at all and the ds angle is high but it all works ok

Cole82 · 04-14-2006, 08:46 PM

Looks Good Man
As long as it holds up it should work great. I like the body with those red rocks.

TMXONR · 04-14-2006, 08:50 PM

That looks nice, quick build too.

smokinubyrc · 04-14-2006, 08:52 PM

well so far i have done a hardcore test and it has held up but one link broke and it was because the end just poped off so i just put a new ball end on it

and yeah i nose dived it of my bed with is like 3 feet high and nothing broke andi did it in reverse too nothing broke i hope iot hold im hoping to get to the next norcal comp

smokinubyrc · 04-14-2006, 08:55 PM

Quote:

Originally Posted by TMXONR

quick build too.

yeah it went up really fast didnt it
less than 24 hours man this plexxi is easy to work with i seen some tlt guys use it and i tried and succeeded too

smokinubyrc · 04-14-2006, 10:21 PM

well evryone its going to get some rock action tomarrow i hope im going to tak it with us to a car show and see what i can throw at it so far i think i need better shocks thats about it and some more luck nuts lmao and that smaller pinion then im set

04-13-2006, 07:22 PM	#1
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	my maxx makeover well after playing with the tuber set up im deciding to make a diffrent chassie for more of a scale look and my bronko body is going over it i think it is going to be fun to make i bought a sheet of plexiglass and im going to see how well it works out will post pics as it gose along as i have the next week of for spring break for school lmk what u guys think thank you

04-13-2006, 07:44 PM	#3
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	hear is my chassie design i dont think im going to be using the bronco instead my cadi escalade body pic of my paint skills of my chassie done in like 3 mins Last edited by smokinubyrc; 04-13-2006 at 08:07 PM.

04-14-2006, 02:12 PM	#11
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	becasue idk its they way i mounted it its not a comp rig by anymeans so i really dont care about cog and i went and tested the chassie today on some rock i just let the chassie fall down nothing but some scratches came froma 5 foot fall to a cement sidewalk i dont think it is going to break Last edited by smokinubyrc; 04-14-2006 at 02:14 PM.

04-13-2006, 07:37 PM	#2
Cole82 I wanna be Dave Join Date: Jul 2005 Location: Cedar Rapids Posts: 2,028	Sounds like a good plan.

04-13-2006, 07:49 PM	#4
WestCoastPJ Quarry Creeper Join Date: Jun 2005 Location: NOrthern Cali Posts: 312	a little small,but looks OK.what tranny would you be using?

04-13-2006, 07:57 PM	#5
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	it says it in the pic its going to be a stampede tranny on its side

04-13-2006, 09:21 PM	#6
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	half the chassie plate cut and almost done with sanding the frunt of the chassie is the longer side of the nose facing that way>>>>>

04-13-2006, 11:48 PM	#7
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	ok chassie is done and bolted together here are two pics they are dark and sorry about that i will get better one after the sun comes up tomarrow haha rcc in the background

04-14-2006, 02:11 AM	#8
bigred Rock Crawler Join Date: Jul 2004 Location: Mt.View CA Posts: 940	Good luck with the Plexiglas, I've built a few and there a huge let down. You better brace it like HELL!!!. I now stay away from building things that need to be relatively strong with the word "GLASS" in it. I would suggest you use some lexan.

04-14-2006, 10:20 AM	#9
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	well it is 7/8 inch thick plexi and i dont think it is going to need anymore braning than what it has i have to add maby one more an thats it

04-14-2006, 03:17 PM	#12
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	its almost a rolling chassie and its going to sit right at 16 inches i think

04-14-2006, 03:58 PM	#13
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	ok its almost done all it needs is frunt drive line and a way to mount the body and a charged batt its sitting at 16.6 inches and i love it now to the pics now artic shot i know someone is bound to ask its kinda forced that high but all three tires still touching and a flat pic you can see the driveline hanging in the frunt lol

04-14-2006, 04:42 PM	#14
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	here is a quick body just siting on it cole hope you like the chassie is really strong and i dont think it is going to break

Sponsored Links

04-14-2006, 07:23 PM	#15
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	haha its alive it moves and it dose better than i expected i need to get a smaller pinion and im ready to go do anything anybody want to give me a 48 pitch 12 tooth pinion anyway the body is mounted on the side by body post and yp frunt i is mounted by vecro but it might change i dont know edit: their is no torque twist at all and the ds angle is high but it all works ok

04-14-2006, 08:46 PM	#16
Cole82 I wanna be Dave Join Date: Jul 2005 Location: Cedar Rapids Posts: 2,028	Looks Good Man As long as it holds up it should work great. I like the body with those red rocks.

04-14-2006, 08:50 PM	#17
TMXONR Quarry Creeper Join Date: Oct 2005 Location: Bryant, AR Posts: 463	That looks nice, quick build too.

04-14-2006, 08:52 PM	#18
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	well so far i have done a hardcore test and it has held up but one link broke and it was because the end just poped off so i just put a new ball end on it and yeah i nose dived it of my bed with is like 3 feet high and nothing broke andi did it in reverse too nothing broke i hope iot hold im hoping to get to the next norcal comp

04-14-2006, 10:21 PM	#20
smokinubyrc I wanna be Dave Join Date: Nov 2005 Location: Crawler practice! Posts: 2,104	well evryone its going to get some rock action tomarrow i hope im going to tak it with us to a car show and see what i can throw at it so far i think i need better shocks thats about it and some more luck nuts lmao and that smaller pinion then im set

RCCrawler Forums

Thread: my maxx makeover