Maxx Crawlers Gallery

[EastCoastCrawlers]

Truck Base : T-maxx

ESC:LRP A.I quantum runner reverse

Motor(s): Trinity 19T Arcornite

Servo(s):Tower Hobbies TS70MG front, Hitec HS-815BB 1/4 scale rear

Trans: t-maxx locked in first,GD600 2.5:1

Axles: Locked out narrow maxx's

Tires: Maxx Mashers

WB: 14 inches

Overall Width: 14.5 inches

Diff clearance: 3 inches

Center Chassis clearance: 6 inches

Overall height:12 inches with body

Overall weight: 10 pounds

[fullwidthtoy]

Truck Base : E-MAXX

ESC:Super Rooster

Motor(s):Mag Mayhem (reverse rotation 22 turn)

Servo(s):625

Trans:E-MAXX

Axles:Custom MAXX

Tires:Savage (grooved)

WB:16 1/2 to ?

Overall Width:not shur

Diff clearance:3"?

Center Chassis clearance:soda can

Overall height:too much

Overall weight:not enough












for info on my tuber... fullwidthtoy@yahoo.com or PM me.

[TMXONR]

Okay finally here is a pic of my crawler for the gallery.

Truck Base : Maxx/Stampede

ESC: LRP F1 Pro Reverse Digital

Motor(s): Integy 55 turn lathe

Servo(s): Dual HS-645MG's

Trans: Stampede

Axles: Maxx Hybrid

Tires: Proline MOAB XL's on Cheyenne Bead-locs

WB: 15 1/2 inches

Overall Width:17 inches

Diff clearance: 3 inches

Center Chassis clearance: 4 3/4 inches

Overall height: 9 inches

Overall weight: 8.2 lbs

[fabguy]

Ive been looking around for a fiew months now. I finially sighned up. This is my Maxx crawler ive been working on for a fiew months.

Truck Base : E-Maxx

ESC: Novak sensored brushless

Motor(s): Novak brushless 4300

Servo(s): Quad HS-645MG

Trans: E-maxx locked in first with Great planes 2.5 gear reduction

Axles: Maxx-Revo custum

Tires: Proline MOAB XL's on proline Bead-locs

WB: 20.5 inches

Overall Width:19.25 inches

Diff clearance: 4 inches

Center Chassis clearance: 5 inches

Overall height: 12 inches with body

Overall weight: I dont know VERY HEAVY I'll have to update

[MaXX_CrAWlER7]

truck base:e-maxx
esc:stock evx
motor:30 turn 550
servos:stock
trans:stock locked in 1st
axles:stock locked diffs
tires:7"
wb:15"
overall width:?
diff clearence:3"
center chassis clearence:5.5"
overall height:about 13"
overall weight 12lbs




heck yea 90 degrees

look at my custom bumper thats crooked made out od break line


3"custom extention/swivel

[WheelChair]

Truck Base :Emaxx

ESC:Mtronics Super E Truck 3khz

Motor(s):Titan 550

Servo(s):645mg hitec

Trans:Emaxx with Custom Crawlbox. 280 to 415 to 1

Axles:Custom Maxx Crawler Solid Steel Axles / MIP Shafts.

Tires:Moab 40 Series

WB:18.5

Overall Width:18

Diff clearance:2

Center Chassis clearance:4

Overall height:11

Overall weight:30 lbs?

[rockcow]

Truck Base :e-maxx

ESC:stock emaxx 7.2v conversion

Motor(s):integridy 55turn

Servo(s):jr sport rear, hi tech front

Trans:e-maxx locked in first

Axles:e-maxx locked

revo shaft and knuckle conversion

Tires:

WB:16.5"

Overall Width:15.5"

Diff clearance:4.25"

Center Chassis clearance:5.75"

Overall height:11.5"

Overall weight:unknown at this time

[L-TOWN CUSTOMS]

Truck Base : e-maxx

ESC:evx

Motor(s):not sure

Servo(s):futaba

Trans:e-maxx

Axles:e-maxx

Tires:moabs

WB:16"

Overall Width:14"

Diff clearance:3.5"

Center Chassis clearance:6"

Overall height:11"

Overall weight:not sure

[toy4crawlin]

E-maxx CraWleR

Going to build custom ROCK Buggy :-P

The way it sits today Feb. 21. 2007

Truck Base: E-Maxx with custom L Aluminum Chassis

ESC: Rebel 2

Motor: Single Integy 55 x1

Servos: Dual Hitec HSR5996tg , Rear is temp HS5645

Trans.: Temp E-maxx locked in 1st, locked , Custom 4:1 gear Reduction

Axles: E-maxx. Changing to CVD, Stainless custom angled solid axle

Tires: Red Rocks & narrow Moab XL's

Wheel Base: 17"

Overall Width 16.5"

Diff Clearance: 3 3/4"

Center Chassis Clearance: 4.5 "

Overall height: 11" with body, chassis 8.5" tall

Overall weight: 8.5 lb . 10lb with 6 cell battery

[TwistedCreations]

Truck Base : 2.2 Emaxx

ESC: Super Rooster

Motor(s): MM w/ GD600

Servo(s): Hobbico CS70

Trans: Emaxx(locked in first gear)

Axles: Custom 2.2 maxx

Tires: 2.2 Moabs

WB: 12.5"

Overall Width: 11.5"

Diff clearance: 2.75"

Center Chassis clearance: 3.5"

Overall height: No longer have the truck, so can not measure

Overall weight: No longer have the truck, so can not weigh








More pics can be found here http://www.rccrawlermedia.com/rcc-gallery/album06

[Generis]

Maxx Pede thing I designed

Truck Base : GCM (my design)

ESC: XL-5

Motor(s): 55t

Servo(s): Traxxas HD

Trans:Pede 88/12

Axles: maxx females all sides and brass centers

Tires: stock

WB: 14"

Overall Width: stock

Diff clearance: 3.1" f/r

Center Chassis clearance: 3.6"

Overall height: 7.5 no body

Overall weight: 6.3 Lbs

sorry cant load pics. write up is here: http://www.cardomain.com/ride/628266/11
Enjoy

[majestic]

Actual electric Revo. E-Flite Power 25 brushless. Revo tranny, rear steer. Man these things are fun!

[fmgj]

Projeto C-MAXX ( 02/04/2007 )

Truck Base : Traxxas E-MAXX

ESC: DURATRAX INTELLISPEED

Motor(s): TITAN 550 (1), in future: INTEGY MATRIX 55t (1)

Servo(s): Traxxas 2055

Trans: E-MAXX locked in 1st and 72/13T pinions

Axles: E-MAXX diffs locked with CVD’s

Tires: E-MAXX, in future: IMEX RED-ROCK KRAWLER WITH 7 INCHES

WB: 17.5 inches

Overall Width: 16 inches

Diff clearance: 3 inches

Center Chassis clearance: 4.5 inches

Overall height: 9 inches

Overall weight: ~7

[4x4dodge]

Truck Base : E-Maxx

ESC: Stock modded to 7.2 volts

Motor(s): 1 55T integy lathe

Servo(s): Hitech 645mg

Trans: Stock

Axles: Stock, locked

Tires: HPI GT's

WB: ~12"

Overall Width: 16"

Diff clearance: 2.5"

Center Chassis clearance: 3"

Overall height: 10"

[Ninja]

Truck Base : E-Maxx

ESC: Stock modded to 7.2 volts and running 5 cell sub-c reciever pack.

Motor(s): 1 55T integy lathe

Servo(s): 2 x Hobbico CS-80 (4-wheel-Steer)

Trans: Stock w/ 72/10 spur and pinion

Axles: Stock w/ Spools

Tires: IMEX RED ROCK KRAWLER

WB: ~15"

Overall Width: 16"

Diff clearance: 3"

Center Chassis clearance: 3.75"

Overall height: ~11"

[naftausa]

Cramaxx

cramaxx build up..





restamaxx

[bulzeye]

Truck Base : maxx, VS chassis
ESC: moped
Motor(s): Axiom V10 55t
Servo(s): hitec 645, tower pro 955
Trans: maxx trans locked into 1st
Axles: custom solid axles
Tires: Imex Red Rock on Maximizer beadlocks
WB: 17 1/4"
Overall Width: 17"
Diff clearance: 3"
Center Chassis clearance: 4.5"
Overall height: 9.5"
Overall weight: 11 pounds

[Garrett]

Full album here ------> http://www.putfile.com/garrett85/images/72603

[macr0w]

Not quite a "crawler" yet, but I'm on the way.

[teamrebel]

Truck Base : custom/tmaxx

ESC: stock savage running 14.4v

Motor(s): single stock 550 savage

Servo(s): tower pro digital hi-speed

Trans: tmaxx

Axles: tmaxx with spool

Tires: pro cut bogger(swamp dawgs)

WB: 17"

Overall Width: 16"

Diff clearance: 2 1/4"

Center Chassis clearance: 3 1/2"

Overall height: 11"

Overall weight: 10lbs

here r some pics










Here r some videos