08-14-2007, 10:06 PM | #61 |
Newbie Join Date: Jul 2007 Location: Anchorage
Posts: 45
| NIce Maxx's Here Mine Last edited by 666; 06-11-2008 at 02:48 PM. |
Sponsored Links | |
08-17-2007, 07:50 PM | #62 |
Rock Crawler Join Date: Jun 2007 Location: Working in my dream RC workshop and remodeling my entire home.
Posts: 850
| Maxxx Crawler!!!
Here are the spec's from my crawler...my first build I've ever attempted. There was a lot of trial and error and frustation. I made all the links, the chassis, the battery tray, the servo mounts and everything else from scratch by hand. All made with Dremel, drill, grinder and brain. After a lot of reading, looking at these pictures, and trying stuff that didn't work, I now have an awesome truck!! Thanks to all of you out there. See ya on the rocks!! The shots are from my favorite playground, the Susquehanna River!! Truck Base : E-Maxx ESC: Traxxas EVX Motor(s): Hand tuned twin 27 turn epics and 9t Robinson pinions Servo(s): Tower pro 995mg w/aluminum arms Trans: E-Maxx locked in 1st gear w/72 t spur Axles: T-Maxx wide A's locked out Tires: 40 series Moabs w/Pro-line Commando beadlocks and star cut foams WB: 14" Overall Width: 18'' Diff clearance: 3'' Center Chassis clearance: 6'' Overall height: 13'' Overall weight: 10 lbs. Last edited by MAXXMASHER; 08-17-2007 at 08:05 PM. Reason: put in wrong width |
09-03-2007, 03:21 AM | #63 |
Quarry Creeper Join Date: Aug 2007 Location: Rocklin, CA
Posts: 476
|
Truck Base :T-maxx/ custom chassis 4 link ESC:Traxxas XL5 Motor(s):75t Lathe Servo(s):tower pro 995 front &rear Trans:pede locked Axles: -maxx locked Tires: Losi Rock Claws on Maximizer beadlocks WB:16.5" Overall Width:16.5" Diff clearance:3.75" Center Chassis clearance:5.75" Overall height:10.5" Overall weight:12 lbs. |
01-18-2008, 01:30 PM | #64 |
Rock Crawler Join Date: Jun 2006 Location: Sinking Spring
Posts: 572
| Comp Maxx
Heres my comp crawler, Specs, Custom Maxx axles locked, Lengthened Revo driveshafts, Axial AX-10 trans, Johnson 550 motor on a GD-600, Moped esc, Traxxas TQ3 with rear steer mod, Tower Pro 945mg servos front/rear, MudSlingers 40 Series, RC4WD 40 Series beadlocks, Droop with Maxx aluminum shocks front modified rear, Duratrax Mini Quake springs for internal springs It is currently going through a rebuild so most of the above specs will not aply afterward. Onto the pics, ThanX, Krystopher |
01-22-2008, 11:22 PM | #65 |
Rock Stacker Join Date: Jul 2006 Location: Chico
Posts: 59
| |
01-26-2008, 04:29 AM | #66 |
Quarry Creeper Join Date: Nov 2007 Location: NH
Posts: 427
|
Here's a few pics of my maxx crawler, as of now I'm running full droop susp. with mini-t springs and 50 wt. oil inside maxx shocks,can't wait for spring to get out and test it!!!!! Truck Base :emaxx ESC: Novak rooster crawler Motor(s):integy v-10 55t Servo(s): hi-tec 645 X 2 Trans:emaxx locked into 1st gear 9t pinion 72t spur Axles:maxx locked out susp. Tires:40 series moab on proline beadlocks WB: 17 1/2" Overall Width: 17 1/2" Diff clearance: 3" Center Chassis clearance: 4 1/4" Overall height: 9 1/2" Overall weight: n/a no action pictures as of yet, the snow has all the rocks covered Last edited by allgm1; 03-01-2008 at 06:40 PM. Reason: added more pics |
03-08-2008, 03:03 AM | #67 |
Quarry Creeper Join Date: Feb 2008 Location: ICE BERG HELL
Posts: 202
|
Here's my first build outside of an AX10. Base Chassis, axles, Tires bought from Derwood21. Just had to make all steering linkage, trans mounts, and side plates (roof, rear, and hood were included) Full 4 wheel steering and 2 speed is operational Base: Emaxx ESC: Novak Rooster Crawler (new version) Motor: Integy 60T Servos: JR z9100t front, HS-5645MG Rear, Eflite 7.5g sub-micro for shifter Trans: Emaxx with RC4WD Aluminum gears and full functioning 2sp Axles: Locked Emaxx Tires: Losi Claws WB: 17 1/4" Width: 16 1/4" Diff Clear: 3" Center Clear: 4" Total Height: 9 1/2" Weight: Unknown as I don't have a scale currently PICS ARE Roughly START TO FINISH |
04-22-2008, 03:37 PM | #68 |
Quarry Creeper Join Date: Jul 2006 Location: In a tree top with my chainsaw!!
Posts: 476
| Rock Demon
Truck Base :e maxx ESC:mtroniks Motor(s):p2k Servo(s):hs645 Trans:e maxx Axles:custom steel solid axle mip cvds Tires:moabs WB:18.5 inches Overall Width:18 inches Diff clearance:3.25 inches Center Chassis clearance:3.75 inches Overall height:10 inches Overall weight:15 pounds |
04-22-2008, 03:50 PM | #69 |
Quarry Creeper Join Date: Jul 2006 Location: In a tree top with my chainsaw!!
Posts: 476
| Red Devil
Truck Base :maxx ESC:sidewinder Motor(s):p2k Servo(s):hs645 Trans:stealth Axles:custom solid steel maxx diffs cvds Tires:2.2 moabs or 2.2 rock claws WB:12.5 Overall Width:front 12.25 rear 11.5 Diff clearance:2.25 Center Chassis clearance:2.75 Overall height:7.5 Overall weight:7 pounds |
06-11-2008, 02:45 PM | #70 |
I wanna be Dave Join Date: Sep 2006 Location: Stuck on a Rig in the middle of nowhere Utah.
Posts: 2,024
| Stick Maxx
This is my first attemt at any thing in the R/C world. Some of parts I am little embarassed about . The chassis and the axle housings are made out of alluminum from the local hardware store. The body is off of the Emaxx I hack. I am looking for a replacement body, but that will be awhile before that happens. Truck Base : Used Emaxx parts and alluminun ESC: stock novak Motor(s): Integy 55t Servo(s): Hitec hs5955tg / Hitec hs-645mg Trans: RC4WD V2 Axles: Custom Emaxx Tires: Moab XL WB: 18" Overall Width: 16 1/2 Diff clearance: 3 1/14" Center Chassis clearance: 5" Overall height: 10 3/4" Does any one know of any wheel wideners for an emaxx to 23MM? These wheels are to far in to clear my batteries. |
07-13-2008, 06:31 PM | #71 |
Newbie Join Date: Jul 2008 Location: evansville
Posts: 3
| here my emaxx crawler
integy 55t single gd600 rear reduction steel cvd locker front and rear locker in 1st gear tazer 15t esc narrowed rims IF YOU GUYS SEE ANYTHING THAT I COULD TO TO MAKE THIS TRUCK BETTER PLEASE LET ME KNOW!!!!!!!!!! |
08-20-2008, 02:11 PM | #72 |
Pebble Pounder Join Date: Jul 2008 Location: ov, sacramento
Posts: 198
|
Truck Base :emaxx ESC:tekin rebel 2 Motor(s):55t 66/9 gearing Servo(s):dual hs-645's(need some fat 805bb's) Trans:stampede Axles:maxx with narrow bottoms for the top Tires:aluminum maximizers with lsts WB:18 3/4 Overall Width:18(want to make in narrower) Diff clearance:3 Center Chassis clearance:4 Overall height:8 3/4 Overall weight:9 1/2 lbs Last edited by norcrawler; 08-20-2008 at 02:13 PM. |
10-11-2008, 10:56 PM | #73 |
I wanna be Dave Join Date: Feb 2006 Location: Campbell, CA 4 hrs 2Rubicon !
Posts: 2,044
| [/quote] Nice job |
01-31-2009, 02:18 PM | #74 |
Pebble Pounder Join Date: Jan 2009 Location: Colorado Springs
Posts: 112
| Brushless emaxx
Truck Base : E-MAXX 16.8 ESC: NOVAK BRUSHLESS Motor(s):BRUSHLESS Servo(s):JR Z9100HVT Trans: STOCK 2 SPEED Axles: STOCK WITH ALUMUNUM Tires: MOAB 40'S WB: 16.5 Overall Width: 16 Diff clearance: 3.5 Center Chassis clearance: 5.5 Overall height: DONT KNOW Overall weight: DONT KNOW Last edited by brushlessemaxx; 01-31-2009 at 09:33 PM. Reason: add pic |
02-16-2009, 08:01 AM | #75 |
Newbie Join Date: Jun 2004 Location: va
Posts: 48
| my emaxx 16v |
07-02-2009, 02:59 AM | #76 |
Newbie Join Date: Apr 2009 Location: sacremento
Posts: 4
| my maxx crawler
i have a custom built maxx crawler, the axles are made from metal tube,the tranny is a differential and two spur gears to lower the speed and increase the torque. i have moab xls and i have a pair of swamp dogs this thing is huge Truck Base : e maxx ESC:super rooster Motor(s):55t Servo(s):5955tg Trans:custom Axles:custom Tires:moab xls and swamp dogs WB:20iches Overall Width:17inches Diff clearance:2 inches Center Chassis clearance:4 1/2 inches Overall height:10iches Overall weight: 13lbs side view comparison to my axial 2.2 |
09-08-2009, 05:30 AM | #77 | |
Newbie Join Date: Jul 2009 Location: Mendo county
Posts: 6
| Quote:
| |
09-08-2009, 05:37 AM | #78 | |
Newbie Join Date: Jul 2009 Location: Mendo county
Posts: 6
| Ck-maxx Heres my unfinished C-MAXX Quote:
| |
01-18-2010, 09:57 PM | #79 |
Newbie Join Date: Mar 2007 Location: cda
Posts: 33
|
Truck Base :e-maxx ESC:tekin rebel 2 Motor(s): integy 55x1 Servo(s):tower pro 995 and hs 5645mg Trans:emaxx locked in 2nd Axles:emaxx locked with spools Tires: moab xl WB:17" Overall Width:17" Diff clearance:3" front 3.25" rear Center Chassis clearance:4.5" Overall height:10.75 Overall weight: unknown |
01-20-2010, 03:37 PM | #80 |
Newbie Join Date: Aug 2009 Location: Little Rock
Posts: 2
|
my friend like your crawler, he thinks your on the right track. Keep up the good work:-P
|
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/traxxas-crawlers/8540-maxx-crawlers-gallery.html | ||||
Posted By | For | Type | Date | |
t-maxx off roader/rock crawler | This thread | Refback | 10-05-2011 01:01 PM |
| |