Maxx Crawlers Gallery This has been requested from other Members, so it's time to post up your rides and keep them all in one spot so others can view them and help give ideas.DO NOT post pictures of projects torn in pieces,they need to be driving and in one piece.Have at least one picture with the body on and not a bunch of chassis shots( unless it's a tuber).Pics that DO NOT work( due to the host), will also be deleted.If you see something in the pics and want more info, please PM that person and ask. This will keep all the BSing to a minimum. If you guys can't re-size, you can send them to TwistedCreations@cinci.rr.com and i will try to help ya out ;-) answer the following ( copy and paste if ya want) Truck Base : ESC: Motor(s): Servo(s): Trans: Axles: Tires: WB: Overall Width: Diff clearance: Center Chassis clearance: Overall height: Overall weight: |
2 Attachment(s) Truck Base: E-MAXX ESC: EVX with mod Motor: Mag Mayhem Servo(s): Hitec 5625(f) 5625(r) Tranny: E-MAXX Axles: Emaxx locked out (diffs locked) Tires: Jumbo kongs Wheelbase: 16 Overall Width: 18 Diff clearance: 4.5 Center Chassis Clearance: 4.5 Top of Chassis Height: 9 Top of Body height: 13 |
My old Maxx Truck Base : E Maxx ESC: Futuba 230 Motor(s): Multiplex 600 Servo(s): Hobbico CS80 Trans: Narrowed single speed e maxx Axles: Custom aluminum sheet axles with maxx internals Tires: cut LST's WB: 16.5 Overall Width: 15.5 Diff clearance: 4.25 Center Chassis clearance: 5 Overall height: 10 Overall weight: ~8 http://www2.mini-zracer.com/albums/M...y/DSCF0129.jpg |
2 Attachment(s) Truck Base : E-Maxx ESC: Novak Rooster Motor(s): Trinity Spec. (soon to be lathe motor) Servo(s): Bluebird 630mg(front)/ Futaba S9201(rear) Trans: E-Maxx locked in 1st Axles: Maxx hybrid(used Twisted's idea!!) Tires: Imex J Hawgs on Maxximizer beadlocks WB: 15" Overall Width: 14.5 Diff clearance: 2.5 Center Chassis clearance: 4.5 Overall height: 10.5 Overall weight:about 8lbs |
2 Attachment(s) Truck Base : Maxx ESC: Super Rooster Motor(s): Johnson 27t w/ GD600 Servo(s): Cs-70's F&R Trans: Maxx locked into 1st Axles: Hybrid Maxx axles Tires: LST's on narrowed stock maxx rims WB: 17" Overall Width: 16" Diff clearance: 4.5" Center Chassis clearance: 5.5" Overall height: 12" Overall weight: 10lbs. |
3 Attachment(s) Posted for Extremeoffroad Truck Base : Maxx and gecko ESC: EVX with both mods Motor(s): mag mayhem Servo(s): hitec HS-5735MG 1/4 scale Trans: e maxx Axles: t maxx locked out Tires: jumbo swamp dawgs WB: 18in. Overall Width: 17 Diff clearance: 4 Center Chassis clearance: 4.5 Overall height: 12in Overall weight: 10lbs. |
Truck Base :E-MAXX ESC:EVX one battery one motor Motor(s):Mag mayem with reduction box Servo(s):645 Trans:Stock locked in first Axles:locked stokers Tires:Front cut jumbo claws Rear cut jombo swamps WB:16 and a bit inches Overall Width:Dunno Diff clearance:4 and bit inches Center Chassis clearance:5 and a bit inches Overall height:Dunno Overall weight:About 2 kilo's http://img.photobucket.com/albums/v5...x/3f4ec46c.jpg http://img.photobucket.com/albums/v503/emaxx/body4.jpg Chris |
2 Attachment(s) Might as well post up a few pictures of my rig... it's about finished... Stats: - Old Maxx(narrow) - RCRockGear Maxx SAS Kit - Rockraider Chassis - E-Maxx tranny locked in first & zero slop modification - Big 'ol spur gear and 8-tooth pinion - 1/8 scale buggy shocks up front & X-Factor shocks in rear - currently 15.5" wheelbase It's almost too clean and pretty to run on the rocks... |
2 Attachment(s) Truck Base : 40's willys jeep based tube frame/alum ESC:evx with mod Motor(s):55t lathe 9-72 Servo(s):hi tech 645mg 133 gram Trans:e maxx Axles:e maxx locked out Tires:k rocks mounted on maximizers WB: Overall Width:15 1/2 Diff clearance:4 Center Chassis clearance:5 1/2 (bottom trans mount) Overall height:10 3/4 Overall weight no scale sorry s/a if not less than stock maxx |
4 Attachment(s) The newest truck from Twisted Creations ;-) Owner: Rufies97XJ Truck Base : Emaxx ESC: SR Motor(s): Reversed MM motor with GD600 Servo(s):CS-70 in the front and Bluebird 630 in the rear Trans: Maxx locked into 1st Axles: Custom Maxx axles Tires: LST's on narrowed Hot Bodies rims WB: 16 1/2" Overall Width: 15 1/2" Diff clearance: 4 1/2" Center Chassis clearance: 5 3/4" Overall height: 11" Overall weight: 8 lbs. |
Project Flexx-Maxx 4x4x4 Truck Base : New E-Maxx ESC: Jamara NoLimit Motor(s): Multiplex Permax 600 Servo(s): HiTech 645MG front +rear Trans: E-Maxx tranny @76/12 + Graupner reduction gearbox 2,8:1 Axles: E-Maxx, both locked with spool Tires: Imex Jumbo Kongs on Sayville rims; cutted WB: 42,3cm Overall Length: 60,5cm Overall Width: 47,0cm Diff clearance: 11,7cm Center Chassis clearance: 14,5cm Overall height: 30,0cm Overall weight: 6688g - inclusive batteries and some dirt :mrgreen: http://www.manuel-aka-mdk.net/pics/e...iele_thumb.jpg More pictures in hi-res: pic 1 | pic 2 | pic 3 | pic 4 | pic 5 Manuel |
Here's Crawlmaxx E-Maxx EVX w/mod 1-55t Lathe JR Racing Z650M E-Maxx tranny Hyrbid Maxx with CVD's Cut & Shut Kongs with grooving, 3" wide, stock Maxx wheels backwards 17" WB 17" width 4 1/8" dif clearance 4 3/4" chassis clearance 12 1/2" overall height ~11 lbs http://coloradok5.com/photos/data/500/1705Jun12_61.JPG http://coloradok5.com/photos/data/500/1705Jun12_62.JPG http://coloradok5.com/photos/data/500/1705Jun12_60.JPG |
4 Attachment(s) The Rockroach Truck Base : Maxx (early series ~2000 Narrow Track) ESC: Novak SR Motor(s): 2 x Mag Mayhems (one reverse timing, one forward) Servo(s): Hitec HS 5645-MG Trans: Maxx locked in first Axles: Locked out maxx narrow track Tires: Maxx Mulchers WB: 16" Overall Width: 14.5" Diff clearance: 3" Center Chassis clearance: 4" Overall height: 9.75" Overall weight: dunno. Heavier than I would like. Final Crawl Ratio: 8T/72T = 71:1 crawler ratio |
Truck Base : E-maxx ESC: EVX (with mod) Motor(s): lathe motor (1) Servo(s): 645mg front Trans: e-maxx locked in 1st Axles: locked out maxx axels and arms Tires: savage tires WB: 15" Overall Width: 16" Diff clearance: 3.75" Center Chassis clearance: 4.75" Overall height: around 11" Overall weight: 8.5lbs http://i16.photobucket.com/albums/b1.../JamCam185.jpg http://i16.photobucket.com/albums/b1.../JamCam158.jpg http://i16.photobucket.com/albums/b1.../JamCam160.jpg http://i16.photobucket.com/albums/b1.../JamCam138.jpg more to come. colin |
Man my e-maxx is nothing like yours. http://i12.photobucket.com/albums/a2...n/P1010017.jpg |
Truck Base :Maxx ESC:Rooster Motor(s):Johnston 27T Servo(s):To be CS-80's f/r Trans:Homemade from bbq roster Axles:Maxx Tires:Stock WB:18'' Overall Width:Stock Diff clearance:3" Center Chassis clearance:5'' Overall height:dunno Overall weight:Freakin' Heavy http://img218.imageshack.us/img218/2...k0019su.th.jpg http://img218.imageshack.us/img218/5...k0024lx.th.jpg |
Truck Base : Emaxx ESC: Tekin Rebel 2 Motor(s): Integy 55T Lathe Motor Servo(s): 645-MG Servo Trans: E-Maxx Locked in 1st Axles: Solid Axles Tires: LST's on RPM Clawz WB: 16 inches Overall Width: 17 inches Diff clearance: 3 1/2 inches Center Chassis clearance: 4 3/4 inches Overall height: 6 inches Overall weight: 8.5 pounds http://img.photobucket.com/albums/v5...1/724bfadb.jpg |
Truck Base : E-Maxx ESC:Super Rooster Motor(s):1 Magnetic Mayhem attached to t a GD-600 Servo(s):Hitec HS 645's front and rear Trans:Stock E-maxx locked into first Axles:Custom tube axles with E-Maxx diffs and knuckles Tires:Lst's on narrowed Maximizer Beadlocks WB:17" Overall Width:16 3/4" Diff clearance:3 1/2" Center Chassis clearance:5" Overall height:11" Overall weight:11lbs 7 oz http://www.scbd.org/phpBB2/modules/g...3214.sized.jpg http://www.scbd.org/phpBB2/modules/g...3216.sized.jpg http://www.scbd.org/phpBB2/modules/g...3348.sized.jpg http://www.scbd.org/phpBB2/modules/g...3349.sized.jpg http://www.scbd.org/phpBB2/modules/g...3350.sized.jpg |
1 Attachment(s) Posted for Bipolarcrawler Truck Base :traxxas E maxx,custom tube xo skeleton ESC:traxxas Motor(s):trinity 27,integ 55 lathe Servo(s):645 hi tech fr/rear Trans:maxx Axles:custom alum,maxx diffs,steel cv's Tires:modified k rock(mods a must) WB:17"c-c Overall Width:16" Diff clearance:4" Center Chassis clearance:4-1/4 Overall height:10" |
Pud 4 Attachment(s) PYRO's MAXX/ txt contraption Truck Base : highly modded TXT frame ESC: SR Motor(s): peramax 600 Servo(s): hightec 5945 Trans: modded TXT, gd- 600- 89:1 gear ratio Axles: maxx Tires: moabs WB: 17" Overall Width: 16" Diff clearance: 3" f/r Center Chassis clearance: 4" Overall height: 9 3/8" w/ body Overall weight: heavy :mrgreen: http://i15.tinypic.com/4byja5u.jpg http://i11.tinypic.com/35dafyc.jpg http://i19.tinypic.com/2irp0rt.jpg |
All times are GMT -6. The time now is 03:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com