RCCrawler.com Bulletin Board

Madcratebuilder · 01-07-2006, 02:14 PM

Any reason why I should not use the aluminum input and output gears/shaft/idler?

Good spur/pinion combo with 55T or MM?

JohnRobHolmes · 01-07-2006, 02:15 PM

i went with a 72/ 13 and buggy diffs. first gear was great, second gear was peppy.

Madcratebuilder · 01-07-2006, 02:30 PM

Quote:

Originally Posted by johnrobholmes

i went with a 72/ 13 and buggy diffs. first gear was great, second gear was peppy.

Thanks JoRo, my plan is to lock first gear, cut second gear down and eliminate second gear idler. I just realized (brain fart) my stack of t-maxx spurs well work, just need a few pinion gears. The plan is emaxx trans with txt axles, scale frame blah blah. Having never had a set of txt axles in my hand, it's all a (crack) pipe dream.

Trike Kid · 01-07-2006, 04:16 PM

Most people run a 9/72 gear combo, I'm going to run 11/72 because I have more trails than rocks.

01-07-2006, 02:14 PM	#1
Madcratebuilder Pebble Pounder Join Date: Oct 2005 Location: I need MORE GIGGLE JUICE Posts: 134	e-maxx trans ? Any reason why I should not use the aluminum input and output gears/shaft/idler? Good spur/pinion combo with 55T or MM? Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

01-07-2006, 02:15 PM	#2
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 14,854	i went with a 72/ 13 and buggy diffs. first gear was great, second gear was peppy. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

01-07-2006, 04:16 PM	#4
Trike Kid RCC Addict Join Date: May 2005 Location: Roy/Eatonville, WA Posts: 1,128	Most people run a 9/72 gear combo, I'm going to run 11/72 because I have more trails than rocks. Share Share this post on Digg Del.icio.us Technorati Twitter Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

RCCrawler.com Bulletin Board

Thread: e-maxx trans ?