| |
12-30-2006, 02:35 AM
| #1 |
| Rock Stacker Join Date: Jan 2005 Location: Upland
Posts: 79
|  maxx build Im on christmas brake right now and have all of next week to work on my maxx i am going to be ordering off of towerhobbies tomarrow and i am not shure what all to order for the build here is what i have so far, I am not shure what parts i need exactly for the revo output shafts from the trans if i have the wrong stuff let me know. Thanks, Shane C. 1 7.19 Traxxas Half Shaft Set L&R Revo 1 1.90 HPI Screw Shaft M4x2x12mm Black Savage 21 (6) 1 3.89 Traxxas Yokes Differential & Transmission 2 221.98 Hitec HSC-5955 Titanium Gear High Speed Servo U NOTE:"Price Each" reflects price for each quantity of 2 to be shipped 2 7.59 Hitec Standard Metal Horn 3/4" Single Sided 1 249.99 Novak Crawler Brushless System 18.5 016W7 SAVE $50 ON $499.90 order Applied during checkout process if this order qualifies Sub-Totals: In-Stock Items: $500.13 Last edited by e-maxxcrawl; 01-15-2007 at 11:54 AM. |
|  |
| Sponsored Links | |
| | |
|
01-03-2007, 12:51 AM
| #2 |
| Rock Stacker Join Date: Jan 2005 Location: Upland
Posts: 79
| ya defiantly im getting started tomorrow with the lockouts and the servo mount. I ordered everything and waiting to get it now. and i sorta got sidetrack with tearing my truck apart today now all the interior is laying on my patio drying out. ow ya i also have maximizer beadlocks with the 3/4 offset and im not sure what tires to run what do you think? I finished the upper link mounts and got started on the lockout i plan to have all of the axles complete tomarrow (steering, lower link mounts)     Last edited by e-maxxcrawl; 01-04-2007 at 12:21 AM. |
|
| |
|
01-06-2007, 08:07 PM
| #3 |
| Newbie Join Date: Dec 2006 Location: Cotati
Posts: 49
| any up dates |
|
| |
|
01-06-2007, 11:36 PM
| #4 |
| Rock Stacker Join Date: Jan 2005 Location: Upland
Posts: 79
| yup i got the axles done just need to build the servo mount i was expecting my tower order to come in early Thursday morning when i was planing in finishing the axles but it didn't come till 6 at night. Then i was delayed with getting my license friday after four hours i got to take the test! only 4 mistakes though i think thats pretty good. tomorrow i will be finishing up the axles and deciding if im going to do a single tube chassis like soya or just a standard chassis. for the ease im thinking soya's design.     |
|
| |
|
01-07-2007, 01:26 AM
| #5 |
| Newbie Join Date: Dec 2006 Location: Cotati
Posts: 49
| looks like its coming along good |
|
| |
|
01-09-2007, 11:09 PM
| #6 |
| Rock Stacker Join Date: Jan 2005 Location: Upland
Posts: 79
| so i was wondering what to do today for my chassis i was looking around my room for anything that could help then when i came across the stock tlt chassis i thought what better candidate for an e-maxx rig setup! holes are drilled and all and the only thing left for me to do is make the support braces and trans mounts. sweet  ill work on it more tomorrow, today im just visually thinking of what to do with it. so far i got some 1/4 aluminum angle to support the chassis and give me the spacing need so the chassis is not to narrow.1/11.07     Last edited by e-maxxcrawl; 01-11-2007 at 08:33 PM. |
|
| |
|
01-13-2007, 12:23 AM
| #7 |
| Quarry Creeper Join Date: Oct 2005 Location: Bryant, AR
Posts: 435
| Its Jan 13th, is this done yet  |
|
| |
|
01-13-2007, 11:26 AM
| #8 |
| Rock Stacker Join Date: Jan 2005 Location: Upland
Posts: 79
| nop :( i was more focused on getting my 2.2 all ready for the comp and im leaving today ow well i am a little mad i didnt reach my set goal but it happens looks like all the socalrcrc crawlers will have to wait to see another max. |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
