TRX4 with 1.55"'s?? Has anyone tried it yet?? |
Re: TRX4 with 1.55"'s?? Outside of the demo trucks, not sure anyone here has gotten one yet. |
Re: TRX4 with 1.55"'s?? You might be right. I've been cruising through the Traxxas forum and there's a bunch of those guy's that have 'em, I posted the question there as well. |
Re: TRX4 with 1.55"'s?? I think 1.55's are going to look stupid silly and that's IF they work. I'm not sure they will clear the portals without a lot of offset. Aren't the stock wheels 2.2? |
TRX4 with 1.55"'s?? Quote:
Dear Mr. Ripper The stock wheels are 1.9. Sincerely, The google machine Sent from my iPhone using Tapatalk |
Re: TRX4 with 1.55"'s?? Quote:
Your name makes me think of the song "Spaceman" by Artificial Joy Club. That takes me way back. https://www.youtube.com/watch?v=IKtjk4Dp6z8 |
Re: TRX4 with 1.55"'s?? Here is a pic of Carterfab's truck running Vanquish wheels with .225 hubs and they clear the portals but not by much. http://i.imgur.com/o5OpyRNl.jpg A 1.55 is a lot smaller so I really doubt is would fit over the portal. Wide offset hubs would be needed and this truck doesn't need to be wider. |
Re: TRX4 with 1.55"'s?? Quote:
The old VP wheels are stupid narrow and they look so out of place on this truck judging from this photo! :lmao: With offset comes more leverage on the axle. The bearings are going to wear much faster and there's potential that this axle housing will break. 1.55's are probably a bad idea. |
Re: TRX4 with 1.55"'s?? Quote:
I've never heard that song or band, I'm a metal guy lol. I can't even remember why I named myself spaceman.... Anyway, I compared the wheelbase of the 1:1 and the TRX-4 and it's about 1/8th ish scale so 1.55 wheels would look a little small. Sent from my iPhone using Tapatalk |
Re: TRX4 with 1.55"'s?? Quote:
Sounds like it would look perfect next to the Sawback since that's also closer to 1/8th or so. The stock tires are "only" 4.64" OD so they're not as big as I had thought. |
Re: TRX4 with 1.55"'s?? I did something silly and read the manual. It says the minimum required inner diameter for wheels is 38 mm (1.5 inches). I can't think of a 1.55 wheel on the market with 1.5 inches of inner clearance. |
Re: TRX4 with 1.55"'s?? Well looky here! https://uploads.tapatalk-cdn.com/201...48edcf4268.png Sent from my iPhone using Tapatalk |
Re: TRX4 with 1.55"'s?? Quote:
|
Re: TRX4 with 1.55"'s?? Needs lowered at least 2" to look normal perhaps. |
Re: TRX4 with 1.55"'s?? Meh.... those Thrashers are a bit on the small side Of what I would be interested in running, they're 3.67" and the Iroks i'm interested in are 4.4" and the oem's are 4.64" |
Re: TRX4 with 1.55"'s?? Quote:
|
Re: TRX4 with 1.55"'s?? Quote:
https://www.landrover.com/Images/CV_...09_550x321.jpg |
Re: TRX4 with 1.55"'s?? I think some 2.2s and a large 1.9 tire like the Hyrax would suit this rig well. Dontchyathink? |
Re: TRX4 with 1.55"'s?? Quote:
The 4.75" tires like the Hyrax are going to create a lot of body rub so they might be a little too big. We shall see... |
Re: TRX4 with 1.55"'s?? Quote:
I'll stick with 1.9s but definitely going with a tall tire. |
All times are GMT -6. The time now is 07:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com