TRX4 Mods Just a thought. I'm sure we're gonna need a TRX4 Mods thread. Lets do everything except Tires & Wheels. I have already installed a Holmes Trailmaster Pro WP, A Holmes BLE Pro WP, a Castle BEC 2.0 WP and a Savox 1210SG WP. I had these as spares for my Wraith so TRX4 get 'em. http://i214.photobucket.com/albums/c...ps4iiiuxv1.jpg http://i214.photobucket.com/albums/c...psrfrxodaw.jpg http://i214.photobucket.com/albums/c...psf63qbpsi.jpg |
Re: TRX4 Mods I'll be putting in a savox 2290 Ive had in the drawer as a spare to start. |
TRX4 Mods Just swapped the servo. The 2290 wiring was slightly shorter than the stock traxxas servos wiring but it worked out. Upon testing my steering was reversed so I'll provide a link showing how to reverse it back to normal if this happens to anyone else. Also, the holes in the mounting point don't match up perfectly either. I recommend starting the two screws on the passenger (right) side of the truck first and then the two on the driver side. Tighten down the two on the driver side first then finish off tightening down the other two. You'll see what I mean. https://uploads.tapatalk-cdn.com/201...24a6ce0ff7.jpg Link for steering reversal... https://traxxas.com/support/TQ-24GHz-Channel-Reversing |
Chipgibbs - Doesn't the motor need to run in reverse? how did you reverse the run of the motor? Quote:
|
Re: TRX4 Mods Quote:
Thanks! The savox 2290 is a billet or metal housing so there was no snipping happening there, but it worked out. It's on there nice and snug and will not move. Regarding the "reversing", it was my steering. When I would turn right on the tx the wheels would turn left and vice versa. The link I provided works to fix that. |
Re: TRX4 Mods Just ordered this up for my truck. Front bumper mount with servo winch mount. https://farm5.staticflickr.com/4267/...401053_z_d.jpg https://www.shapeways.com/product/A3...ionId=62893131 |
Re: TRX4 Mods I reversed the Trail Master Pro rotation using a Castle link with the BLE Pro ESC. You can change the motor rotation in the settings. You can do this with all the Castle Creations derivative ESCs. |
Re: TRX4 Mods Not that I plan on keeping the stock servo very long but is it safe to assume the 2075X is still a 25 spline? |
Re: TRX4 Mods Quote:
|
Re: TRX4 Mods New Mod: Picked up the Traxxas Link today & installed it in the transmitter. Nice to be able to set end points, motor rotation, servo reversing etc. I'd like to see someone develop an app to add in the aftermarket components installed (instead of only traxxas components). Don't know how much I'll use it after setting up the model but, it wasn't expensive. |
Re: TRX4 Mods I ordered the Traxxas link also. For $27 shipped, it's a handy little attachment. I had one on my Summit remote and it was great for adjusting different settings. |
Re: TRX4 Mods Quote:
$20 shipped? Do you possibly have a link? I'd like to order one too. Thank you! |
Re: TRX4 Mods Was thinking the same thing. $20 is good. Does it require traxxas esc? Doubtful but I've never messed with the new traxxas link stuff. Those remotes have way too much to adjust without having a digital display. |
Re: TRX4 Mods With the Traxxas link, your phone is the digital display. With it, you can see what you're adjusting. The more traxxas stuff that's connected to the receiver, the more info can be read on the phone. Additional sensors can be added. |
TRX4 Mods Quote:
It's a nice addition indeed, especially for $20 shipped, assuming you can actually find them for that. I'm a bit of a skeptic. There was a guy in another thread that said he can get the trx4 for $336. |
Re: TRX4 Mods Quote:
Quote:
Quote:
|
Re: TRX4 Mods dead weight removed proline 2.2 epic beadlocks with flat iron tires ssd rock shield bumpers f/r http://i83.photobucket.com/albums/j3...606_205911.jpg http://i83.photobucket.com/albums/j3...606_210009.jpg |
Re: TRX4 Mods Could you take a pic from the side? I'd like to see how big the 2.2 wheels look. |
Re: TRX4 Mods Neat choice of tires [emoji106] |
Re: TRX4 Mods Quote:
once i find the combo i like, i'll be going back to a 1.9 setup. i just had these on a 1/16 summit-based basher i had built, and decided to try them out on this |
All times are GMT -6. The time now is 06:10 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com