RCCrawler Forums

Inspector86 · 12-06-2017, 11:42 AM

I installed a Vaterra Assender Blazer body on my #2 TRX4 and wanted to run inner fenders. I wanted to attach them so that they would stay in place but still be easy to remove. Initially I was going to use double sided attachment foam but that leaves a sticky mess when removed. After thinking about it I decided to dril a few 1/8" holes in the fenders and attach them with zip ties wrapped around the frame rails. I think it will work out pretty well so I thought I would share.

Here is the Blazer body with the inner fenders in place.

BCCrawlerZ · 12-06-2017, 04:27 PM

Nice work man.. not a half bad idea for sure..

12-06-2017, 11:42 AM	#1
Inspector86 RCC Addict Join Date: Aug 2017 Location: Fredericksburg, VA Posts: 1,912	How I mounted inner fenders on my chassis I installed a Vaterra Assender Blazer body on my #2 TRX4 and wanted to run inner fenders. I wanted to attach them so that they would stay in place but still be easy to remove. Initially I was going to use double sided attachment foam but that leaves a sticky mess when removed. After thinking about it I decided to dril a few 1/8" holes in the fenders and attach them with zip ties wrapped around the frame rails. I think it will work out pretty well so I thought I would share. Here is the Blazer body with the inner fenders in place. Last edited by Inspector86; 12-16-2017 at 10:56 AM.

How I mounted inner fenders on my chassis - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
chassis mounted servo???	mikespeed6	Axial Wraith	2	10-04-2013 07:14 AM
Center mounted gearbox vs. Front mounted on the chassis.. Need info	maxxis77	Newbie General	5	06-05-2013 02:11 PM

12-06-2017, 04:27 PM	#2
BCCrawlerZ Quarry Creeper Join Date: Oct 2006 Location: Great White North! Posts: 432	Re: How I mounted inner fenders on my chassis Nice work man.. not a half bad idea for sure..

Sponsored Links

RCCrawler Forums

Thread: How I mounted inner fenders on my chassis