|
| LinkBack | Thread Tools | Display Modes |
01-24-2018, 04:44 PM | #181 |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: TRX 4 Body Bashing, The cutting has begun...
You're welcome. One of these sweet Protek LIHV packs (that had only been charged at lipo setting, my oversight) outlasted two Turnigy 2200mah 3S HD batteries by over 30 minutes
|
Sponsored Links | |
01-26-2018, 04:53 PM | #182 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
Found a firmer block of foam I like better. Again, glued to the battery strap with E6000. Put Gorilla tape over the screw heads in the bottom corner. Sent from my SM-G950U1 using Tapatalk Last edited by sammyha; 01-26-2018 at 05:00 PM. |
01-26-2018, 04:59 PM | #183 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
Can also reverse the battery strap and run the full size 4100 mAh lipo. The battery spans the lowered portion where the shorty battery goes. Pretty handy to still be able to use the full size lipo. It's brand new. So it will be fine to use when not trying to get serious max crawling ability...like on a trail run. Sent from my SM-G950U1 using Tapatalk Last edited by sammyha; 11-21-2018 at 01:51 PM. |
01-27-2018, 11:42 AM | #184 |
Rock Stacker Join Date: Jan 2018 Location: Madison
Posts: 81
| Re: TRX 4 Body Bashing, The cutting has begun...
Awesome journey with your TRX4 sammyha! What's your average trail time with that shorty pack? I need a new pack and that Protek looks like a good option. Where in northern WI are you? I'm down in Madison. |
01-27-2018, 11:55 AM | #185 | |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun... Quote:
Read Natedog's reply a couple of posts up. Sounds like an awesome battery. Sent from my SM-G950U1 using Tapatalk | |
01-27-2018, 11:56 AM | #186 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun... |
01-27-2018, 12:35 PM | #187 |
Rock Stacker Join Date: Jan 2018 Location: Madison
Posts: 81
| Re: TRX 4 Body Bashing, The cutting has begun...
Ah yes, I know Ashland well. I have a buddy that moved up to Bayfield and now runs the Bodine fishery. We get up there once in a while in the summer. You have any go to places to run up there? Thanks for the battery info, I think I might have to pick one up. |
01-27-2018, 01:32 PM | #188 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
I actually just got back into trucks. Still do helis and planes. I've built a small rock course on my property. Ran one small creek late last year. Need to explore more areas. So, no I don't know of any place or of anyone else running trucks up here. I have my own RC flying field tho. Pretty nice spot... Sent from my SM-G950U1 using Tapatalk |
01-27-2018, 01:34 PM | #189 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
Rock course has a bridge and a rail section... Sent from my SM-G950U1 using Tapatalk |
01-27-2018, 01:46 PM | #190 |
Rock Stacker Join Date: Jan 2018 Location: Madison
Posts: 81
| Re: TRX 4 Body Bashing, The cutting has begun...
Wow, I'm jealous! I have a 1/4 acre lot in the city and would like to have something with more land on the edge of the city. I would then build a little RC mecca. When are you putting the race track in? Just air and crawlers? Any go fast ground stuff? Oh yeah, If I'm muddying up your thread with the conversation, just let me know I can get back to the TRX4. Last edited by Stewdog; 01-27-2018 at 01:48 PM. |
01-27-2018, 01:52 PM | #191 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
Yeah, I've got a E Revo TRX 1/16 monster truck. My oldest boy has been bugging me to build a track. He's the one in the Heli photo, said if I build a track he'd get back into trucks. Here's a YouTube link of what I've been up to with the E REVO... https://youtu.be/g60uH9l77-o We might be a little off subject here, but it is RC, hehe... Sent from my SM-G950U1 using Tapatalk |
01-27-2018, 02:05 PM | #192 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
It's not a problem by me...the moderators might say something, idk. With thirty acres in the country I can pretty much do whatever. It's a lot of work and upkeep to build tracks and rock crawling course tho. Sent from my SM-G950U1 using Tapatalk |
02-12-2018, 09:06 PM | #193 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
Some more details, real mirrors and head light guards... Sent from my SM-G950U1 using Tapatalk |
02-12-2018, 09:17 PM | #194 |
Rock Stacker Join Date: Jan 2018 Location: Madison
Posts: 81
| Re: TRX 4 Body Bashing, The cutting has begun...
Looks great, I like the headlight covers! I picked up one of those Protek shorty silicone graphene batteries and I really like it. It was great for the size, so I picked up another. We only had a half inch of snow on the ground two weekends ago and I got to get a nice hike in with the truck/battery. I got around an hour of about 50/50 1st and 2nd gear running from the pack. I also used part of your battery tray mod and cut out the sides of the smaller/lower section of the battery tray. Now, my shorty Protek pack sits in the lower part of the tray and I need some foam to hold it all down. Thanks for the idea. I hope you're staying warm up there! |
02-13-2018, 04:41 AM | #195 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
That's some decent run time! Warmer weather is coming, supposed to get some upper twenties to lower thirties by the end of this week. Hopefully done with single digit to sub zero weather. Sent from my SM-G950U1 using Tapatalk |
02-13-2018, 10:52 AM | #196 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
Here's a link to a "final" full reveal... https://youtu.be/I5z-hI_UMh4 Sent from my SM-G950U1 using Tapatalk |
03-27-2018, 12:30 PM | #197 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
Crawling on my rock course. I managed to get in an early season video shoot. I'm quite pleased with the TRX 4's performance... https://youtu.be/1xlEOb3WZmU Sent from my SM-G950U1 using Tapatalk |
05-15-2018, 06:36 AM | #198 |
RCC Addict Join Date: Mar 2018 Location: Ocala, Florida, USA
Posts: 1,213
| Re: TRX 4 Body Bashing, The cutting has begun...
Awesome build brotha! Totally digging all the details. Your build has helped me through my truck bed mod along with a couple other build threads (pics on my thread). I'm now finishing my cage modification & I was wondering what adhesive you used to connect cage rods end to end? I'm using a piece of guitar string in the center of the rod, but I don't want a bunch of discoloration at the joints from the wrong glue. Any advice is very much appreciated. Have a great day!
|
05-27-2018, 12:38 AM | #199 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
AnimalHippie, sorry for the late reply. Been busy with other things(responsibilities...ugh). I used super glue. Medium, just enough to fill the gap. Sent from my SM-G950U1 using Tapatalk |
05-27-2018, 12:41 AM | #200 |
Pebble Pounder Join Date: Aug 2017 Location: US
Posts: 185
| Re: TRX 4 Body Bashing, The cutting has begun...
Here's something I've pondered awhile. Water proofing the receiver for the Warn winch. E6000 again... Sent from my SM-G950U1 using Tapatalk Last edited by sammyha; 05-27-2018 at 08:57 PM. |
TRX 4 Body Bashing, The cutting has begun... - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Trx-4 Body weights. | clm | Traxxas TRX-4 | 4 | 08-25-2017 04:55 PM |
TRX-4 Body options | Zippy1 | Newbie General | 2 | 08-22-2017 01:23 AM |
Cutting trx tires | dittohead | Traxxas TRX-4 | 2 | 08-10-2017 01:13 AM |
TRX-4 plus Axial FC Body. | AggressorBLUE | Traxxas TRX-4 | 5 | 05-17-2017 08:45 AM |
Thread Tools | |
Display Modes | |
| |