TRX 4 Body Bashing, The cutting has begun... I've been studying this mod for awhile, decided to go for it. I love the look and have a couple different ideas to share. Also a good way to dump some top heavy weight. Here's a couple of shots on the progress so far. Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Checking COG, will compare when done. https://uploads.tapatalk-cdn.com/201...0ce474fd30.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Lay out for the cuts. This will eliminate the top windows. Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... A better look at the bed height. Hoping after I make the bed tonneau cover I can fit ring magnets underneath.https://uploads.tapatalk-cdn.com/201...2d6407072d.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Cut layout for side rail shown before I finish the exo cage mods. https://uploads.tapatalk-cdn.com/201...e02a070f6c.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... A couple of things about this body bash... The back window/roof piece is a very strong structure. I felt that I would eliminate the top windows if I couldn't figure how to shorten the windows and have both ends with a radius. I didn't come up with a way to do that. The deeper bed should have a bit of the power wagon look to it. I like that look. The side rails should accent that look. Roof rack is gonzo...Lose the weight is the motto on that. A shortened rack would look cool but is not justified. Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Using #11 Exacto knife to center drill hole by hand. Drill bit will follow. Critical to drill on center. https://uploads.tapatalk-cdn.com/201...fc4f09408e.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Finished exo cage, very light...https://uploads.tapatalk-cdn.com/201...34b210c3cb.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Been a busy basher, here's the setup I came up with to bend the tabs. The idea being a straight bend and no wrinkles in the side of the bed...https://uploads.tapatalk-cdn.com/201...673c3caa16.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... I'm open to hear any tips on how others bend the tabs. It's fairly thick lexan, takes quite a bit of heat to bend. Read someone used a lighter. How? Burnt my fingers is all I accomplished. I went with my airplane covering iron. Turned all the way up... Pretty sketchy result, lots of wrinkles in the tabs. It's gonna work tho, they are just glue surfaces. https://uploads.tapatalk-cdn.com/201...43f5a1b194.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... The good news... the sides are straight.https://uploads.tapatalk-cdn.com/201...dbd55cd32a.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Other side... Just need straight sides and level surfaces, the tonneau cover will hide the tabs.https://uploads.tapatalk-cdn.com/201...b563dc73ee.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... A couple of shots of the overall results so far. Mission accomplished on the deeper bed...https://uploads.tapatalk-cdn.com/201...87cd83120d.jpghttps://uploads.tapatalk-cdn.com/201...5c6f073f64.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Lowered the CG of the body 3/4"...https://uploads.tapatalk-cdn.com/201...2e2c1e51d2.jpghttps://uploads.tapatalk-cdn.com/201...9720fdff13.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Heard the stock weight is 1.9 pounds...https://uploads.tapatalk-cdn.com/201...38fe603e5d.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Done with the E6000. Kept it fairly neat, five pieces of screen, five applications, in order to let it setup while laying flat so it doesn't run or drip. Messy stuff... but strong. https://uploads.tapatalk-cdn.com/201...8370ba6c03.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Tonneau cover made but not attached yet. I cut up an old art portfolio case. Used contact adhesive left over from the clothes dryer seal to fold it over the edges. Mean stuff, works amazing. Scale looking enough material for a tonneau cover I think. The mean 279368 adhesive...https://uploads.tapatalk-cdn.com/201...80ba995adb.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Home stretch, I'll make tabs in the front and back of the bed, attach the tonneau cover, put the snorkel on...tomorrow. It's getting really late here...https://uploads.tapatalk-cdn.com/201...f5ab17ee08.jpghttps://uploads.tapatalk-cdn.com/201...ca706d9e88.jpg Sent from my SM-G950U1 using Tapatalk |
Re: TRX 4 Body Bashing, The cutting has begun... Very nice work! |
All times are GMT -6. The time now is 09:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com