Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Level as I could make it. By moving shock towers back to stock position. Should help with your drawing. https://uploads.tapatalk-cdn.com/201...688d14e8ae.jpghttps://uploads.tapatalk-cdn.com/201...0e6cd096c3.jpghttps://uploads.tapatalk-cdn.com/201...59271ab827.jpghttps://uploads.tapatalk-cdn.com/201...9796082653.jpghttps://uploads.tapatalk-cdn.com/201...c8bc207cea.jpg

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

That'd be great. Closer to where it's going to be will make it easier to understand my vision :-)

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Best I could do time wise

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Are you planning on pushing it closer to the cab or is that close to where it's going to be?

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

I will moving it forward.

Pitstop to get food for campsite.


Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Project going on hold for some time as the basement including the rc area is getting new flooring and wall insulation so progress is not likely to happen for some time. As everything is getting moved.

Thanks for your patience.

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Small update.

Floor pans removed. Allows the Bullhead to sit much lower. But shifting servo keeps it from where I want it to sit. I'm going to try shimming the micro servo see if it will work properly. If that doesn't work I'm removing the 2sp option. Going to single and from there gear back up a bit to get a little more wheel speed back. I'm going to give this thing crazy power just like the real 1:1 Sneaky Pete rig. But since I trail more then anything I'll have to find a nice combo. 3800kv should be close enough or 2400kv range.

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Removed rear shock towers, Floorpans and tire testing. Reason for the shock towers being removed is that it lowers the height of both the rear cage and rear of the body.

Basement reno's been pushed back so I'm doing as much work as I can on the RTThttps://uploads.tapatalk-cdn.com/201...c7a17bfb8e.jpg

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Concept flex on the bench. Just sitting roughly where I want everything. Just because it is fun. https://uploads.tapatalk-cdn.com/201...95aa6912ef.jpg

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Tomorrow the RTT will be back on the bench. Hope to get the cab mounted this time around.

Also Need to go find some piano wires.

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Magnets in place. Going to use E6000 to hold them. To body post then once bottom magnets are in place I'll separate the magnets with aluminum foil once payday arrives. And order a single speed conversion for the transmission making it a single speed. As I just drive it in low gear no longer need high gear. https://uploads.tapatalk-cdn.com/201...916d2167db.jpg

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Mounting beadlocks and new tires to see what rig I best like them on. Proline K02's 1.9 on gmade SR02 1.9
Like them better on my RC4WD D90 than the trx4 itself. Going to get a few different opinions. Let me know what you think. Between the Rockbeast XL and the the K02's. https://uploads.tapatalk-cdn.com/201...3e38ef3256.jpghttps://uploads.tapatalk-cdn.com/201...215e100164.jpg

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Need more profile shots front and side but I think the KO2’s look cool.

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Don't care for the tread pattern on the K02, but the size of them is gonna perform the better IMO. Not a big fan of big tires. 4.75 is the biggest I'd run.

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Didn't have enough battery in my cell phone at the time of the picture. But good idea for next time.

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

I don't care for it neither tread pattern wise. I actually have a set of 2.2 MOABS from back in the day that are smaller than these tires. I won't go much bigger unless I build up my summit 1/10. Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

So after the input from everyone looks like Rockbeast are staying on.

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Experienmenting with GCM racing parts. For the shocks it's better than before. Now to test run.
Rear cross member for Vaterra Ascender. Maybe a lot more helpful than previously planned which is a good thing.

As basement is being done this weekend I'm working on the dining room table till I get a basement area to work in again. https://uploads.tapatalk-cdn.com/201...ab1995469d.jpghttps://uploads.tapatalk-cdn.com/201...a9697230b2.jpghttps://uploads.tapatalk-cdn.com/201...585f8e16d7.jpg

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

Cleaning up the transmission and skid plate in preparation for a single speed conversion. And also allows Bullhead body to sit lower.

Sent from my FRD-L14 using Tapatalk

Re: Schs2013 Project "Ratty-Trucky Truggy"
 

. https://uploads.tapatalk-cdn.com/201...d322f083cc.jpghttps://uploads.tapatalk-cdn.com/201...f70581a586.jpg

Sent from my FRD-L14 using Tapatalk