|
| LinkBack | Thread Tools | Display Modes |
03-06-2018, 12:05 PM | #1 |
Quarry Creeper Join Date: Feb 2007 Location: Lleida
Posts: 279
| Any 4 link and servo on axle kit?
Any brand manufacture a 4 link and servo on axle kit for TRX4?
|
Sponsored Links | |
03-11-2018, 12:38 PM | #2 |
Quarry Creeper Join Date: Feb 2007 Location: Lleida
Posts: 279
| Re: Any 4 link and servo on axle kit?
Nobody?
|
03-11-2018, 05:18 PM | #3 |
Quarry Creeper Join Date: Feb 2016 Location: Pembroke ON Canada
Posts: 462
| Re: Any 4 link and servo on axle kit?
Can't find anyone selling something like that. You may have to create it.
|
03-11-2018, 07:32 PM | #4 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: Any 4 link and servo on axle kit?
Not sure how you plan on fitting the second upper link where the motor resides? I suppose it's possible someone could come out with an upper wishbone setup to 3 link it without the panhard setup. Would likely require a custom spur gear housing to mount the second rod end on the frame side of the wishbone. Not sure if it would be worth the effort.
|
03-17-2018, 12:02 AM | #5 |
Quarry Creeper Join Date: Aug 2017 Location: Surface of the Sun
Posts: 324
| Re: Any 4 link and servo on axle kit?
I've pretty much decided that there's NOTHING you can't get 3D Printed!!! An Upper Y-Link, like the early SCX10's, would be a good setup for that. MIGHT even be very close in length! (Many 1/10 Framed Rigs have very similar front link length. It's the rear links, where they all mostly play with their Wheelbase)
|
Thread Tools | |
Display Modes | |
| |