RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Traxxas TRX-4 (http://www.rccrawler.com/forum/traxxas-trx-4/)
-   -   Brendens TRX Fords (http://www.rccrawler.com/forum/traxxas-trx-4/596406-brendens-trx-fords.html)

BRENDEN J 03-09-2018 06:38 PM

Brendens TRX Fords
 
New bumper winch and Servohttps://uploads.tapatalk-cdn.com/201...96df16b0c4.jpghttps://uploads.tapatalk-cdn.com/201...c4f3e3e89c.jpghttps://uploads.tapatalk-cdn.com/201...76f4c539ef.jpghttps://uploads.tapatalk-cdn.com/201...3ca3f75f5c.jpg

Sent from my SM-G955U using Tapatalk

Sluggo2u 03-09-2018 07:27 PM

Re: Brendens bronco
 
Nice stable!

What chassis is that on the far left?

the_ghetto_rig 03-11-2018 10:56 AM

Re: Brendens bronco
 
What bumper is that?

BRENDEN J 03-11-2018 12:54 PM

Quote:

Originally Posted by Sluggo2u (Post 5809612)
Nice stable!

What chassis is that on the far left?

Losi night crawler with alots of goodies



Quote:

Originally Posted by the_ghetto_rig (Post 5809994)
What bumper is that?

Its a traxxas

Quote:

Originally Posted by Capt J-rod (Post 5817027)
You'll love it... I almost bought one last week. The bronco body solves 99% of the very few complaints that people had with the TRX. The wheel base is reduced to 12.3. The inner fender wells stay with the chassis rather than the body. The center of gravity is better with the lighter shell. It's an awesome RTR that is at home on the crawler course and a blast in the back yard thanks to the 2-speed trans. The guys crawling them up at the LHS are very competitive with the bronco. Whats really cool is that it excels in areas of the course where my ascender struggles, but struggles where the ascender thrives. Congrats on the new rig!


the_ghetto_rig 03-11-2018 01:07 PM

Re: Brendens bronco
 
Quote:

Originally Posted by BRENDEN J (Post 5810024)
Its a traxxas

Sent from my SM-G955U using Tapatalk

That winch bumper with the red shackles is Traxxas?

BRENDEN J 03-11-2018 04:32 PM

Re: Brendens bronco
 
Quote:

Originally Posted by the_ghetto_rig (Post 5810031)
That winch bumper with the red shackles is Traxxas?

So i though it was a traxxas but after looking better its just says for traxxas trx4 its a rc4wd knock off but it came with the squre mounts for trx4 witch i didnt find a lot of kits with those mounts . It could be higher .

Sent from my SM-G955U using Tapatalk

the_ghetto_rig 03-11-2018 04:35 PM

Re: Brendens bronco
 
Quote:

Originally Posted by BRENDEN J (Post 5810104)
So i though it was a traxxas but after looking better its just says for traxxas trx4 its a rc4wd knock off but it came with the squre mounts for trx4 witch i didnt a lot of kits with those mounts . It could be higher .

Sent from my SM-G955U using Tapatalk

Ok, thanks!

Shape_Shifter 03-12-2018 08:57 PM

Re: Brendens bronco
 
Which winch bumper is that? It looks pretty good and it appears to be wider than some of the ones Ive been looking at. Got any full side pics with new bumper on?

BRENDEN J 03-16-2018 05:01 PM

Quote:

Originally Posted by Shape_Shifter (Post 5810509)
Which winch bumper is that? It looks pretty good and it appears to be wider than some of the ones Ive been looking at. Got any full side pics with new bumper on?

Rc4wdhttps://uploads.tapatalk-cdn.com/201...51fd6f012a.jpg


Anyone done this https://uploads.tapatalk-cdn.com/201...09173bc170.jpg

Replacementhttps://uploads.tapatalk-cdn.com/201...d259c04ea3.jpg


Now a esc im really starting to hate this truck

Sent from my SM-G955U using Tapatalk

the_ghetto_rig 03-24-2018 02:31 PM

Re: Brendens bronco
 
Quote:

Originally Posted by BRENDEN J (Post 5814282)
Now a esc im really starting to hate this truck

Sent from my SM-G955U using Tapatalk

Hang in there, man. The truck itself is a solid platform, you're just having issues with the stock RTR elecs. RTR elecs have come a LONG way in the last 10 years, but most folks seem to upgrade their elecs right away and either sell or repurpose the stock elecs.

Shape_Shifter 03-29-2018 07:08 PM

Re: Brendens bronco
 
Did your ESC over heat? Mine was overheating the other day and wouldn't go in to reverse until I let it cool down a few minutes. I put a fan on it, but it shouldn't be over heating that easy.

Novak used to make Traxxas ESCs. No more I guess.

BRENDEN J 03-30-2018 09:06 AM

Quote:

Originally Posted by Shape_Shifter (Post 5816204)
Did your ESC over heat? Mine was overheating the other day and wouldn't go in to reverse until I let it cool down a few minutes. I put a fan on it, but it shouldn't be over heating that easy.

Novak used to make Traxxas ESCs. No more I guess.

No i was driving for 10min and it just stopped no power to the motor .
Im up and running with new stock esc replaced by traxxas new servo and BEC .

New brasshttps://uploads.tapatalk-cdn.com/201...94b9384cf4.jpg

Heres some picshttps://uploads.tapatalk-cdn.com/201...38f051b9cf.jpghttps://uploads.tapatalk-cdn.com/201...b920da11c4.jpghttps://uploads.tapatalk-cdn.com/201...003a7bca38.jpghttps://uploads.tapatalk-cdn.com/201...e3b3e4e236.jpghttps://uploads.tapatalk-cdn.com/201...46421b4c2e.jpghttps://uploads.tapatalk-cdn.com/201...c6bb28ec1d.jpghttps://uploads.tapatalk-cdn.com/201...2fcf49fda8.jpghttps://uploads.tapatalk-cdn.com/201...77ddc6dc23.jpg

Sent from my SM-G955U using Tapatalk

Shape_Shifter 04-14-2018 06:21 PM

Re: Brendens bronco
 
Looks great. Sorry I missed it today. Was it windy there? I got home and half of the stuff in my yard was blown all over the place.

BRENDEN J 04-14-2018 07:48 PM

Re: Brendens bronco
 
Quote:

Originally Posted by Shape_Shifter (Post 5821880)
Looks great. Sorry I missed it today. Was it windy there? I got home and half of the stuff in my yard was blown all over the place.

A little to start but not once we stated . We had to go to ken caryl . It was sweet tho

Sent from my SM-G955U using Tapatalk

BRENDEN J 04-27-2018 09:46 PM

Re: Brendens bronco
 
New rims and winchhttps://uploads.tapatalk-cdn.com/201...1edd3ebb98.jpghttps://uploads.tapatalk-cdn.com/201...f8038e05cc.jpghttps://uploads.tapatalk-cdn.com/201...959b8bf4fc.jpghttps://uploads.tapatalk-cdn.com/201...e72951b761.jpg

Sent from my SM-G955U using Tapatalk

BRENDEN J 04-29-2018 02:41 PM

Re: Brendens bronco
 
Another great day at the spothttps://uploads.tapatalk-cdn.com/201...ccbbdcffc5.jpghttps://uploads.tapatalk-cdn.com/201...4a8f425b81.jpghttps://uploads.tapatalk-cdn.com/201...d65ff3cf35.jpghttps://uploads.tapatalk-cdn.com/201...c2e1aba43b.jpg

Sent from my SM-G955U using Tapatalk

BRENDEN J 03-14-2019 04:33 PM

Re: Brendens bronco
 
Haven't posted a pic for awhile https://uploads.tapatalk-cdn.com/201...a0d954ad34.jpghttps://uploads.tapatalk-cdn.com/201...0b9eb2aa08.jpg

Sent from my SM-G955U using Tapatalk

BRENDEN J 03-14-2019 04:38 PM

Re: Brendens bronco
 
Improvements I've done since my last post Headlights tail lights , roof rack with extra lights, installed winch and window cages

Sent from my SM-G955U using Tapatalk

BRENDEN J 04-04-2019 04:58 PM

Re: Brendens bronco
 
New picshttps://uploads.tapatalk-cdn.com/201...cfa88b2f44.jpghttps://uploads.tapatalk-cdn.com/201...3ebbf68e53.jpghttps://uploads.tapatalk-cdn.com/201...fb27c7c911.jpg

Sent from my SM-G955U using Tapatalk

BRENDEN J 04-14-2019 06:59 PM

Re: Brendens bronco
 
Front brass https://uploads.tapatalk-cdn.com/201...c16b1230c5.jpghttps://uploads.tapatalk-cdn.com/201...31cefb2b2f.jpghttps://uploads.tapatalk-cdn.com/201...039a72c0aa.jpghttps://uploads.tapatalk-cdn.com/201...ebe24482fc.jpg

Sent from my SM-G955U using Tapatalk


All times are GMT -6. The time now is 12:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com