RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Traxxas TRX-4 (http://www.rccrawler.com/forum/traxxas-trx-4/)
-   -   Wiring BEC, Y Harness question (http://www.rccrawler.com/forum/traxxas-trx-4/596777-wiring-bec-y-harness-question.html)

DaveinCT 03-19-2018 05:42 PM
Wiring BEC, Y Harness question
 
https://www.bhphotovideo.com/images/...ss_1367386.jpg

I grabbed this harness to power my Savox servo through my Castle BEC. It's the stock Traxxas ESC and receiver, do I have to remove the red wire going to the receiver?

Dirt Runner 03-20-2018 04:40 AM
Re: Wiring BEC, Y Harness question
 
It should look like this https://goo.gl/images/RNLCRv

Sent from my SM-N950U using Tapatalk

Ninomaniac 03-20-2018 08:09 AM
Re: Wiring BEC, Y Harness question
 
yes.

Natedog 03-20-2018 11:04 AM
Re: Wiring BEC, Y Harness question
 
Quote:
Originally Posted by DaveinCT (Post 5812696)
... do I have to remove the red wire going to the receiver?
No, but.....

Quote:
Originally Posted by Dirt Runner (Post 5812808)
It should look like this https://goo.gl/images/RNLCRv
Yes!

https://holmeshobbies.com/electronic...s-adapter.html

"thumbsup"

DaveinCT 03-20-2018 12:18 PM
Re: Wiring BEC, Y Harness question
 
Thank you! I will make one up and rewire it now


One more question, on the Castle instructions it says to remove the red wire from the throttle wire, do I still do this wiring it with a bypass?

Natedog 03-20-2018 01:48 PM
Re: Wiring BEC, Y Harness question
 
No.

Dirt Runner 03-20-2018 02:13 PM
Re: Wiring BEC, Y Harness question
 
Quote:
Originally Posted by Natedog (Post 5812952)
No.
What he said

Sent from my SM-N950U using Tapatalk

DaveinCT 03-20-2018 04:39 PM
Re: Wiring BEC, Y Harness question
 
Thank you again fellas!!

cmbscx10 03-20-2018 04:46 PM
Re: Wiring BEC, Y Harness question
 
Quote:
Originally Posted by DaveinCT (Post 5812981)
Thank you again fellas!!
Going to throw another wrench in the wood chipper.

If your going to run a winch or ?? And are going to order a harness I would suggest the below even if you don't use the Aux port for a while.

https://holmeshobbies.com/electronic...ry-output.html


All times are GMT -6. The time now is 04:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com