RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Traxxas TRX-4 (http://www.rccrawler.com/forum/traxxas-trx-4/)
-   -   SSD TRX-4 Bronco Winch Bumper (http://www.rccrawler.com/forum/traxxas-trx-4/599914-ssd-trx-4-bronco-winch-bumper.html)

durok 06-25-2018 06:12 PM

SSD TRX-4 Bronco Winch Bumper
 
Seen at RPP Hobbies:

https://www.rpphobby.com/product_p/ssd00273.htm

https://cdn3.volusion.com/7z62e.xvk6...jpg?1529914915

Inspector86 06-25-2018 06:13 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
I like that!

Miatardo 06-25-2018 06:45 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
Quote:

Originally Posted by durok (Post 5845442)

Pretty nice and not a bad price. I think it needs raised about half of it's own hieght. Looks like it sits lower and further out than the plastic Traxxas. Maybe the angle the picture is taken. But to me getting the tires on an obstacle around the bumper is the hardest part of crawling the bronco. But if it can be raised up a bit it is definitely a doable bumper to keep a close to factory look.

durok 06-25-2018 06:50 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
I think it suits the Bronco.

I think it'd be sweet if they drilled it a couple places from the top/bottom...

Then you could more easily add a couple extra lights, or a lightbar, or even a tubular stinger with threaded ends and nuts to secure it.

durok 06-26-2018 03:05 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
Just noticed in RPP's preview post of this that it will also be offered in a black anodized finish - Excellent news!

SSD 06-27-2018 04:56 AM

Re: SSD TRX-4 Bronco Winch Bumper
 
The height/position of the bumper is very similar to the 1:1 bumper it was based on.

SSD 06-28-2018 03:29 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
Black:

http://www.ssd-rc.com/images/bronco%...ack%20main.jpg

http://www.ssd-rc.com/images/bronco%...0black%204.jpg

http://www.ssd-rc.com/images/bronco%...0black%205.jpg

*Bronco Winch Bumper for TRX4 (Black)


Chrome:

http://www.ssd-rc.com/images/bronco%...ome%20main.jpg

http://www.ssd-rc.com/images/bronco%...chrome%202.jpg

http://www.ssd-rc.com/images/bronco%...chrome%204.jpg

http://www.ssd-rc.com/images/bronco%...chrome%203.jpg

Bronco Winch Bumper for TRX4 (Chrome)

soze 06-28-2018 04:26 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
Looks pretty nice!

Adama 06-28-2018 05:04 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
Looks Great! Reminds me of the Warn Winch Bumper I had on my 68 Ford F-100 4x4. Might have to get one for the Bronco now.

FordSpeed 06-30-2018 05:03 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
I like the looks of this bumper. How wide is it? I have it in mind for a different project. Also, do the trx4 bumpers and the scx10 ii kit bumpers interchange?

SSD 07-02-2018 06:57 AM

Re: SSD TRX-4 Bronco Winch Bumper
 
Quote:

Originally Posted by FordSpeed (Post 5847001)
I like the looks of this bumper. How wide is it? I have it in mind for a different project. Also, do the trx4 bumpers and the scx10 ii kit bumpers interchange?


This bumper is 215mm wide.


Yes all SSD TRX-4 bumpers can be used on the SCX10 II chassis (and vice versa).

wdiabc 07-02-2018 09:12 AM

Re: SSD TRX-4 Bronco Winch Bumper
 
the silver one looks great

tuanies 07-02-2018 12:56 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
Would the Traxxas bull bar still bolt on to it?

SSD 07-03-2018 12:57 PM

Re: SSD TRX-4 Bronco Winch Bumper
 
Quote:

Originally Posted by tuanies (Post 5847523)
Would the Traxxas bull bar still bolt on to it?

No it won't.

monsterbeetleguy 03-20-2020 12:41 AM

Re: SSD TRX-4 Bronco Winch Bumper
 
Anyone mounted one of these on a TRX-4 Blazer?

Brad

JatoTheRipper 03-20-2020 06:18 AM

Re: SSD TRX-4 Bronco Winch Bumper
 
Wow! That's an awesome looking bumper!

monsterbeetleguy 03-27-2020 01:29 AM

Re: SSD TRX-4 Bronco Winch Bumper
 
Just ordered one of these for my Blazer. I'll have to make some adjustments to get a proper fit but think it should look sweet!

Brad

monsterbeetleguy 04-19-2020 03:11 AM

Re: SSD TRX-4 Bronco Winch Bumper
 
Thought I’d share some pics of the bumper mounted up on my Trx4 Blazer. Initially put the 9.5cti winch on, but ordered the 8274 and I’m really impressed how it turned out. All I’ve done so far is trim the front of the body. Thanks for your help in making this happen.


[URL=http://smg.photobucket.com/user/monsterbeetleguy/media/My%20Traxxas%20Trx4%20Blazer/87937AE4-F60A-4175-BEFA-0AF90B5085A9_zpsmsjgwct2.jpg.html]http://img.photobucket.com/albums/v4...psmsjgwct2.jpg[/URL

http://img.photobucket.com/albums/v4...psphfnbf2l.jpg

http://img.photobucket.com/albums/v4...psvzmwyoe1.jpg

http://img.photobucket.com/albums/v4...ps1dvkwarz.jpg

Brad


Sent from my iPhone using Tapatalk


All times are GMT -6. The time now is 08:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com