What did you do to your TRX-4 today?

[mud bogger]

Chasing a censor loss problem with a Mamba x, HH puller pro 2700kv. Ordered a new censor harness.

[BIGW0RM]

Did some speed tests. Both on 3S 5000mah battery.

Stock 11T pinion did 11MPH

TF2 14T pinion did 16.7MPH

[Schs2013]

K10 E6000 drying in place upside down for the evening till tomorrow night when i check it to make sure it sticks. If i was smart enough i would have taken the inner fenders section off and used to stock stuff from easier access. Oh well to late now. Rear end is propt up by some extra tires. Onto the tubs which keeps a nice weight on the E6000 and magnets while it drys up

Sent from my FRD-L14 using Tapatalk

[Schs2013]

So unhappy right now. Im going to figure something else out. All the cursing in the world won't fix this. So unhappy :(
Ended up using body post as i don't have enough left to fix it with magnets. Not the way i wants to do it but it was fixed. Repainting the black. Now she is really for Sundays CTC.

Sent from my FRD-L14 using Tapatalk

[Schs2013]

Call To Crawl event yesterday was awesome. My first competition style event and it won't be the last.

Sent from my FRD-L14 using Tapatalk

[mud bogger]

Ordered 5mm upper rear links to replace the bent and undersized stocks

[JC3]

Beat the hell out of it for four hours straight at the quarry. Testing out suspension changes and the effectiveness of my weight reduction program.

[GEOCRAWLER]

Ordered portal weights, Al servo arm and HH servo.

Sent from my SM-N950U using Tapatalk

[Topher Builds]

Marc that looks like a great event! Love the scale camper and barn.


After over a year with the predator hyrax on the trx4, it was time for some new rubber. Also finally picked up a new body to replace the Comanche, but keeping that one under wraps till I figure out the paint.

Boom racing hustlers 4.45 in ‘snail snot’. We shall see how they do.

[derek1387]

Got my TRX4 Snap On edition today

That’s what I did!

Haven’t opened it yet though

[Inspector86]

Well, after two years and a little over 700 hours run time on my #1 TRX4 chassis, I finally had a Traxxas 2065 micro servo fail today. This is the first stock micro servo I have had fail out of 5 TRX4 chassis. Ordered three Blue Bird 373MG analog micro servos from Hobbyking as an experiment.

[Topher Builds]

That’s some life out of that little guy! Impressive.

[BIGW0RM]

Tried a 9t pinion and love it! Much easier to slow crawl.


Sent from your iPhone.

[punkindrublik]

Originally Posted by punkindrublik

Broke a C-hub

I fixed my TRX-4 today.

New STRC aluminum hubs and new bearings FINALLY showed up.

Oh, and swapped my 27t for a 21t and installed an aluminum motor plate that also took it's time getting here.

[JC3]

Went to my second local crawling comp. Tough course with some great competitors. The X4 performed extremely well.

[mass-hole]

Took it out for a crawl in the rock slide and managed to strip out the gears in my cheap Chinese 32 kg servo. Only used it a handful of times.

So I put in my other 20 kg cheap Chinese servo. Problem solved!

Might be time to consider a better servo. Not sure if I wanna go HH SHV500 or Promodeler 470 or what.

[Schs2013]

Small walk around the neighborhood with my mom and dog and that tiny K10

Sent from my FRD-L14 using Tapatalk

[Schs2013]

Ordered a new bumper for the K10. It won't be here in time for the next event but the current one will work.

Sent from my FRD-L14 using Tapatalk

[Schs2013]

What did i just walk by? Oh my goodness that is a picture moment and a first for me.

Sent from my FRD-L14 using Tapatalk

[Up'n'Over]

Rebuilt my shocks and greased them up with slime, so they don't stick anymore. Also bought some shiny new wheels. These are the only wheels I have that aren't black.