Mini T springs on TRX4 shocks I know that on the bottom I can swap over to big bore shock ends and then use mini T spring cups but has anybody come up with something to secure and center the spring to the upper shock body? Sent from my iPhone using Tapatalk |
Re: Mini T springs on TRX4 shocks Stay tuned. Im working on something |
Re: Mini T springs on TRX4 shocks Quote:
[emoji482] Sent from my iPhone using Tapatalk |
Re: Mini T springs on TRX4 shocks These have a 12mm ID.....they should fit. https://www.fishscrawlerparts.com/st...per_set.html#/ |
Re: Mini T springs on TRX4 shocks I hope to have a solution soon. Waiting on some parts to get here. Until then look at the point im at now. https://uploads.tapatalk-cdn.com/201...0888c2064c.jpg Sent from my iPhone using Tapatalk |
Mini T springs on TRX4 shocks Quote:
Does that spacer limit uptravel? Also, what is the advantage of a mini spring like this? |
Re: Mini T springs on TRX4 shocks Main advantage is Droop. Its not for everyone though. I run droop on every rig I have. |
Re: Mini T springs on TRX4 shocks Quote:
I guess i domt understand what running droop means. Meaning you run deep in the travel so you have lots of downtravel at static ride height? |
Re: Mini T springs on TRX4 shocks Yes. Makes the truck sit at its lowest point. |
Re: Mini T springs on TRX4 shocks What is your point in doing this? |
Re: Mini T springs on TRX4 shocks Quote:
|
Re: Mini T springs on TRX4 shocks Quote:
Crap. I just saw you answered it above as well. Thanks. |
Re: Mini T springs on TRX4 shocks Quote:
Same reason the big bores and mini t spring kits exist. Lots of people have the trx shocks on other platforms so there will be folks that want this setup for comp trucks. |
Re: Mini T springs on TRX4 shocks Quote:
So are you literally riding on bump stops at static ride height with this or is there a little compression left? |
Re: Mini T springs on TRX4 shocks Would all depend on the spring setup. They have Soft, Medium and Firm springs. But yes it will sit at its lowest possible way when sitting. |
Re: Mini T springs on TRX4 shocks |
Re: Mini T springs on TRX4 shocks Quote:
I personally run Big Bores w/ ultra soft miniT springs and 80 weight oil. |
Re: Mini T springs on TRX4 shocks Quote:
I actually found that on a google search. After reading i still was not 100% sure if droop meant fully bottomed out or if ut just meant you run more droop than compression. I am kinda running a mild droop setup with my long travel shocks. It sits pretty close to full compression at stock ride height but has lots of droop available. |
Re: Mini T springs on TRX4 shocks Shocks are not bottomed. 40% droop. Works great. |
Re: Mini T springs on TRX4 shocks Quote:
I’m curious because I can’t tell from the pic. Is the bottom spacer solid limiting up travel? Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 10:15 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com