Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Traxxas TRX-4
Loading

Notices

Thread: Proline Ford F250 Honcho Body

Reply
 
LinkBack Thread Tools Display Modes
Old 08-16-2019, 09:44 PM   #1
Rock Stacker
 
Join Date: Aug 2019
Location: Rancho Cucamonga
Posts: 91
Default Proline Ford F250 Honcho Body

Really loving this look! Guess it's made for the SCX10, but it shares the same 12.3 wheelbase with the TRX-4.

Wondering if it would work without too much fuss?



Sent from my SM-G960U using Tapatalk
toys222 is offline   Reply With Quote
Sponsored Links
Old 08-16-2019, 09:48 PM   #2
Quarry Creeper
 
Join Date: May 2019
Location: North Highlands
Posts: 301
Default Re: Proline Ford F250 Honcho Body

I like that a lot. The only problem I see would be the rear posts. You gonna be a guinea pig?
punkindrublik is offline   Reply With Quote
Old 08-16-2019, 09:56 PM   #3
Rock Stacker
 
Join Date: Aug 2019
Location: Rancho Cucamonga
Posts: 91
Default Re: Proline Ford F250 Honcho Body

I'm torn! I want to paint and custom fit a body, but I'm also impatient and want to drive it! Lol

Sent from my SM-G960U using Tapatalk
toys222 is offline   Reply With Quote
Old 08-16-2019, 11:28 PM   #4
Quarry Creeper
 
Join Date: Feb 2016
Location: Pembroke ON Canada
Posts: 286
Default Re: Proline Ford F250 Honcho Body

I made this K10 body from proline work on Trx4 chassis and even the rear cage. It's do able just took some time and patience. With the Tactical units 12.8in wb. But most anything for a Scx10, Ascender, Sendero.... bodies will fit picture for you that it can be done. But i should really adjust the wheelbase to be smaller. It would look better.

Sent from my FRD-L14 using Tapatalk

Last edited by Schs2013; 08-16-2019 at 11:31 PM.
Schs2013 is offline   Reply With Quote
Old 08-20-2019, 01:16 PM   #5
Newbie
 
Join Date: Aug 2017
Location: Fort Carson
Posts: 38
Default Re: Proline Ford F250 Honcho Body

I've been running a Honcho bed on mine for 2 years now. Essentially I removed the rear body posts, drilled a 1/4" hole in the chassis support and ran a bolt through it. I made a flatbed for the Honcho truggy cage (out of scale diamond plate then another out of .080 styrene) and drilled a hole in it that lined up with the bolt. Used a cap head but to secure the rear of the body down.

Pics on the way.
92fox is offline   Reply With Quote
Old 08-20-2019, 01:25 PM   #6
Newbie
 
Join Date: Aug 2017
Location: Fort Carson
Posts: 38
Default Re: Proline Ford F250 Honcho Body

Two different bodies, but same setup essentially.

Sent from my SM-G965U using Tapatalk
92fox is offline   Reply With Quote
Old 08-20-2019, 02:50 PM   #7
Rock Stacker
 
Join Date: Aug 2019
Location: Rancho Cucamonga
Posts: 91
Default Re: Proline Ford F250 Honcho Body

Very nice 92fox! Thanks for sharing!

PS - I have that same small magnetic tray - comes in handy!
toys222 is offline   Reply With Quote
Old 08-20-2019, 04:37 PM   #8
Newbie
 
Join Date: Aug 2017
Location: Fort Carson
Posts: 38
Default Re: Proline Ford F250 Honcho Body

Quote:
Originally Posted by toys222 View Post
Very nice 92fox! Thanks for sharing!

PS - I have that same small magnetic tray - comes in handy!
Appreciate it man. Next step, I plan on a steel back half cage and some lexan cab. Unsure the exact route I am going, but I really liked my F100 body, and like the F-250 as well.

Sent from my SM-G965U using Tapatalk
92fox is offline   Reply With Quote
Reply



Proline Ford F250 Honcho Body - Similar Threads
Thread Thread Starter Forum Replies Last Post
Proline Ford 'Honcho' body, question about bumper Smonkman Axial SCX-10 5 04-03-2015 08:17 PM
looking for interior for the proline ford f250 four door jboehler04 General Scale Talk 6 08-05-2013 11:57 PM
Honcho Proline F250 cab iluvny081 Paint and Body 21 06-16-2013 04:59 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com