|
| LinkBack | Thread Tools | Display Modes |
10-03-2019, 12:39 PM | #1 |
Pebble Pounder Join Date: Aug 2019 Location: Rancho Cucamonga
Posts: 101
| Let's see your HW Quicrun 1080 mounting...
Getting ready to install mine. I know it can be as simple as slapping it on with some double sided tape, but I'd love to see some clean and creative installs! I saw a while back someone had a pretty nice 3D printed mount design. If anyone know where to buy one please speak up. Looking at my chassis last night I'm considering the flat spot at the front of the Bowhouse battery box using velcro to remove if needed. I'll have a better idea once I have the part in hand. |
Sponsored Links | |
10-03-2019, 12:44 PM | #2 |
Newbie Join Date: Dec 2018 Location: Den Hoorn
Posts: 39
| Re: Let's see your HW Quicrun 1080 mounting... Verzonden vanaf mijn iPhone met Tapatalk |
10-03-2019, 12:50 PM | #3 |
Pebble Pounder Join Date: Aug 2019 Location: Rancho Cucamonga
Posts: 101
| Re: Let's see your HW Quicrun 1080 mounting...
Very nice! And that's an interesting toggle switch for the ON/OFF button!
|
10-03-2019, 12:57 PM | #4 |
RCC Addict Join Date: Mar 2018 Location: Ocala, Florida, USA
Posts: 1,213
| Re: Let's see your HW Quicrun 1080 mounting...
Mine is in the stock location. Trying to keep everything low. gotta keep COG in mind. |
10-03-2019, 01:07 PM | #5 |
Newbie Join Date: Dec 2018 Location: Den Hoorn
Posts: 39
| Re: Let's see your HW Quicrun 1080 mounting...
This ESC is very light. Battery is low. Plus: in this position you can easily program it. Verzonden vanaf mijn iPhone met Tapatalk |
10-03-2019, 09:33 PM | #6 |
Rock Stacker Join Date: Mar 2010 Location: Fargo
Posts: 75
| Re: Let's see your HW Quicrun 1080 mounting...
I printed this little mount for mine a while back. It mounts to the gearbox and I also have the receiver mounted to it. My body is too narrow to fit the electronics in the stock locations. It doesn’t work with stock battery tray. I could make it even better, but for now it works great. |
10-03-2019, 09:42 PM | #7 |
Pebble Pounder Join Date: Jul 2013 Location: Germany
Posts: 132
| Re: Let's see your HW Quicrun 1080 mounting...
I have made a simple plastic plate out of some scrap that screws onto the original screw holes, the 1080 is taped to it with "mirror tape", dual sided sticky foam that doesn't stick to the nylon plastic. The switch cable is cut and extended with some thin servo wires plus heat shrink tubing, the switch is under the rear bumper mount. |
10-04-2019, 01:45 AM | #8 | |
Quarry Creeper Join Date: Mar 2018 Location: Indonesia
Posts: 287
| Re: Let's see your HW Quicrun 1080 mounting... Quote:
Last edited by bbrigg; 10-04-2019 at 01:49 AM. | |
10-04-2019, 02:04 AM | #9 |
Quarry Creeper Join Date: May 2019 Location: North Highlands
Posts: 483
| Re: Let's see your HW Quicrun 1080 mounting...
I printed this off thingiverse. I can hook ya up if ya want one, just shoot me a PM. |
10-04-2019, 06:35 AM | #10 |
Pebble Pounder Join Date: Nov 2009 Location: Newmanstown, PA
Posts: 174
| Re: Let's see your HW Quicrun 1080 mounting...
Found a simple mount off Thingiverse but could have designed my own at work if I wasn't being lazy. Switch is no longer on the front of the battery tray. It's down towards the back end of the left side of the battery where I can reach in through the body's left rear fender opening and around the narrow inner fender well to activate it. Last edited by CamoColton; 10-18-2019 at 05:54 AM. Reason: Replaced photobucket link with imgur |
10-18-2019, 12:59 AM | #11 |
Pebble Pounder Join Date: Aug 2019 Location: Rancho Cucamonga
Posts: 101
| Re: Let's see your HW Quicrun 1080 mounting...
Just finished getting the wiring sorted for the ESC and motor install. I'm pretty happy with how it came out! Can't wait to program and drive this thing! Sent from my SM-G973U using Tapatalk Last edited by toys222; 10-18-2019 at 09:19 AM. |
01-23-2021, 03:31 PM | #12 |
Newbie Join Date: Dec 2018 Location: Den Hoorn
Posts: 39
| Re: Let's see your HW Quicrun 1080 mounting... This is how I mounted mine Verzonden vanaf mijn iPhone met Tapatalk |
01-23-2021, 04:21 PM | #13 |
Newbie Join Date: Nov 2020 Location: Socal
Posts: 43
| Re: Let's see your HW Quicrun 1080 mounting...
Here one you can buy encased with fan and easy trigger https://club5racing.com/easy-start-t...w-cooling-fan/ |
01-23-2021, 05:05 PM | #14 | |
Rock Crawler Join Date: Apr 2020 Location: Northern MN
Posts: 656
| Re: Let's see your HW Quicrun 1080 mounting... Quote:
Boy that’s a clean setup! And clean truck! I just stick to rocks and take the air compressor to mine once a week and it is nowhere near as clean as yours. Wow! Are those battery connectors connecting the HW to the motor? Pretty clever! Never seen that before. Makes perfect sense though! | |
01-24-2021, 12:40 AM | #15 |
Newbie Join Date: Dec 2018 Location: Den Hoorn
Posts: 39
| Re: Let's see your HW Quicrun 1080 mounting...
Agree, bullets however have a bit less resistance. Verzonden vanaf mijn iPhone met Tapatalk |
01-24-2021, 01:13 PM | #17 | |
Rock Crawler Join Date: Apr 2020 Location: Northern MN
Posts: 656
| Re: Let's see your HW Quicrun 1080 mounting... Quote: Holy cow that’s clean!!! How did you mount the battery up front by like that? Do you have a lay down servo mount? | |
01-24-2021, 01:18 PM | #18 |
Quarry Creeper Join Date: Jan 2021 Location: in the Canyon
Posts: 377
| Re: Let's see your HW Quicrun 1080 mounting...
Thank goodness for tiny batteries. Nonetheless, I would classify the current state of the wiring as... okay. Definitely more soldering in my future. |
01-24-2021, 01:49 PM | #19 | |
Pebble Pounder Join Date: Dec 2020 Location: Seattle
Posts: 113
| Re: Let's see your HW Quicrun 1080 mounting... Quote:
No lay down servo mount, just the stock mount being used. With all of my racing buggies I have built, messy wiring is kind of a pet peeve of mine and I try to keep things simple and clean when it comes to electronics. I did mount the ESC with velcro so that way I can relocate it fairly easy to another spot in the vehicle, if I decide to do so later. Last edited by TBuggy; 01-24-2021 at 01:52 PM. | |
01-24-2021, 01:53 PM | #20 | |
Newbie Join Date: Dec 2018 Location: Den Hoorn
Posts: 39
| Re: Let's see your HW Quicrun 1080 mounting... Quote: Great combo with the Torquemaster isn’t it? Super silent but powerrr! Verzonden vanaf mijn iPhone met Tapatalk | |
Let's see your HW Quicrun 1080 mounting... - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC | LSXGMC | Electronics | 450 | 06-27-2020 09:06 PM |
Anyone using the Hobbywing QUICRun WP 1080 ESC? | CoolRunning | Electronics | 143 | 04-28-2020 08:48 AM |
Tekin BXR or Hobbywing Quicrun 1080 | morocho1979 | Electronics | 5 | 03-06-2019 04:52 AM |
QUICRUN WP 1080 brushed ESC (2-3S) With castle Bec | Vwsb74 | Electronics | 14 | 04-07-2017 10:43 AM |
| |