01-07-2020, 04:48 AM | #1 |
Rock Stacker Join Date: Dec 2019 Location: St-Jean - Quebec
Posts: 86
| Winch unit for TRX-4
New to the TRX-4. Need info from experienced guys. What winch do you guys recommend? Something that's easy to install and hassle free? thanks |
Sponsored Links | |
01-07-2020, 06:01 AM | #2 |
Rock Crawler Join Date: May 2013 Location: Uniontown
Posts: 588
| Re: Winch unit for TRX-4
Scale winch or servo winch? Stock radio? Is your rig a Sport or original model? (Need to know if you have a free channel on the radio) You'll get better recommendations with these pertinent details. Sent from my SM-G950U using Tapatalk |
01-07-2020, 10:09 AM | #3 |
Rock Stacker Join Date: Dec 2019 Location: St-Jean - Quebec
Posts: 86
| Re: Winch unit for TRX-4
HI, A scale winch. I purchased the Flysky GT5 yesterday. It's the TRX-4 sport kit with the kit bumpers. |
01-07-2020, 10:41 AM | #4 |
Rock Crawler Join Date: May 2013 Location: Uniontown
Posts: 588
| Re: Winch unit for TRX-4
Alright, well you have plenty of channels on the radio, so you can get a radio controlled winch controller like the Dragon from RCAddict or HeyOK. Just plugs into your RX, and another plug that goes into a power tap you'll need off your ESC wire, either soldered or premade. I'm partial to the RC4WD 8724 since it has power similar to a servo winch, but a mostly stock trx isn't that heavy. So you could go with one of their smaller, and cheaper options. Or the LockedUP RC Commando. I personally avoid the 3racing/integy/Amazon special/etc. Unless I'm not planning to need to winch the vehicle a lot. And at their price point, might as well get RC4WD. To mount it, you'll need a bumper capable of having a winch mounted. Iirc the Sport had a fake winch molded in. Unless it was separable...? Sent from my SM-G950U using Tapatalk |
01-07-2020, 07:46 PM | #5 |
Rock Crawler Join Date: Jun 2015 Location: In the Sticks in the Ozarks
Posts: 940
| Re: Winch unit for TRX-4
That 8274 (sorry, I had the # wrong) is a HOSS!! Mine'll lift my 9&1/2-lb. rig UP THE WALL .... NO prob! (though I almost never use mine ) And it can be mounted inside like a servo winch pretty easily. You just need simple tools and basic fabricatin' skill. The winch-line hole in the bumper and mount is about the hardest part, if you don't have a way to mill it. That way you can have the killer winch and keep the nose short. jim Last edited by dr frankenstyle; 01-08-2020 at 11:09 AM. Reason: ooops'd the # |
01-08-2020, 04:39 AM | #6 |
Rock Stacker Join Date: Dec 2019 Location: St-Jean - Quebec
Posts: 86
| Re: Winch unit for TRX-4
thanks guys. I'll look into the 8724.
|
Winch unit for TRX-4 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIG unit and TRX-4 | Sibstr | Traxxas TRX-4 | 33 | 01-29-2024 07:11 AM |
Open for Pre-Order! New Traxxas TRX-4 Tactical Unit RTR! | RPP Hobby | RPP Hobby | 2 | 10-31-2017 02:16 AM |
winch gear reduction unit | dc588 | General Scale Talk | 5 | 04-26-2008 10:03 PM |
| |