Big Siccx - 3DogRC's TRX6 Sawyers Aunt bought him a TRX6 for Christmas. Yea I know pretty sweet gift!! Here is the priceless look on his face when he opened it!!! In the picture is Sawyers other Aunt that wishes she gave him the truck as Aunt Mary totally stole Christmas this year...! https://i.imgur.com/wl3fFHYl.jpg A great friend of mine @cnccustomwheels caught wind of Sawyer getting the TRX6 and whipped up and overnighted a set of wheels for the Truck with a note that read Merry Christmas Sawyer!!! What an incredibly generous gift!! https://i.imgur.com/WVk20hsl.jpg https://i.imgur.com/lygXd3cl.jpg Now it was my task to raise the money to outfit those wheels properly!! |
Re: Big Siccx - 3DogRC's TRX6 To complete this over the top gift nothing but the finest will be used: Lockedup RC rings and Scale Hardware Crawler Innovations Lil Nova foams RC4WD Milestar Patagonia's 1.9 4.75 https://i.imgur.com/RG2z3Zml.jpg Check the Mars Rover!! https://i.imgur.com/0YvlX4dl.jpg https://i.imgur.com/nAGGtfll.jpg |
Re: Big Siccx - 3DogRC's TRX6 Next up was a few body mods. I needed to make room for the big 4.75 tires so off with some of the Fender Flare it is!! https://i.imgur.com/D0eI8Egl.jpg Perfect!! https://i.imgur.com/lJwu2edl.jpg I also had noticed on this white version Traxxas painted the black for the fender flares on the outside of the body..... One little scratch on the flares and the white shows through real good.... Removing this portion will allow less of the flare to touch the ground when she tips over. |
Re: Big Siccx - 3DogRC's TRX6 Next the exhaust hanging under the rock sliders looks like an afterthought to me. Yes I know that is how it is on the 1:1, I think it looks stupid on there too. I also could not stand how the body came down over the ends of the sliders, the rear portion gets caught on objects passing by and pulls the body out the channel is sits in, no good!! https://i.imgur.com/TUKgszZl.jpg https://i.imgur.com/KManElnl.jpg I occurred to me if I swapped the sliders from side to side and once I snipped off the extra body that came over them the sliders line up with the doors perfectly and leave just enough room to put the exhaust behind them. To me it looks like it is supposed to be there. https://i.imgur.com/48yF9atl.jpg https://i.imgur.com/OAdhrJZl.jpg https://i.imgur.com/3yEsPcMl.jpg |
Re: Big Siccx - 3DogRC's TRX6 We got a quick trip around the circle for our Maiden Voyage (Outside the House) This was before the tires came in, https://i.imgur.com/kSd7CDsl.jpg All that is left is electronics but that is going to have to wait. Hopefully the stock servo will hold out long enough. |
Re: Big Siccx - 3DogRC's TRX6 The time finally came to get it dirty, Off to Lil' Moab Utah we went!! https://i.imgur.com/7JVjTMGl.jpg https://i.imgur.com/4lZnIHGl.jpg DeathProof Sighting!! https://i.imgur.com/61mOlzWl.jpg |
Re: Big Siccx - 3DogRC's TRX6 Looks like you guys are doing it right, having fun, lol. For sure very lucky to have a aunt like that. I image she thinks alot of him. Even better to have each other and everyone around. |
Re: Big Siccx - 3DogRC's TRX6 Quote:
Ernie |
Re: Big Siccx - 3DogRC's TRX6 Love it! The first photo in the thread is priceless, it made me smile when I opened it up. That is 'THE' face of the 'stoked' The X6 is such a cool rig."thumbsup" |
Re: Big Siccx - 3DogRC's TRX6 Quote:
Quote:
Quote:
Isn't that photo a classic, it's actually a screen grab out of a video so the quality is meh... Y'all get the point tho. He went off!!!! |
Re: Big Siccx - 3DogRC's TRX6 More tinkering! I can't believe with all the little parts they designed for this body they couldn't come up with anything to tidy the wires running up the A-pillar.... I guess I need to remember Traxxas is just barely learning to actually see through windows.... Shoo-Goo to the rescue. https://i.imgur.com/b6GWCQMl.jpg While I was at it I decided to clean up the wires that ran elsewhere on the body. I have done this on previous rigs when there was nothing on the inside of the body to attach wires to. Just tape the wires down cleanly in the route you want leaving an area of the wire exposed every inch or so then with a small piece of Lexan spread the Goo over the exposed areas of the wire and wait to dry!! https://i.imgur.com/0lrKUpml.jpg https://i.imgur.com/qGg9owil.jpg |
Re: Big Siccx - 3DogRC's TRX6 I have a question about what your wheel base is from front to middle axle and front to rear axle, it looks shorter than what I have for my 6X6 conversion? "thumbsup""thumbsup" Ernie |
Re: Big Siccx - 3DogRC's TRX6 Very cool rig, great seeing the youngster out enjoying it! (BTW - that Death-Proof Ford is damn wicked...) "thumbsup" |
Re: Big Siccx - 3DogRC's TRX6 That is Awesome, I would have been that excited if I got one for Christmas.. But. had to buy my own few weeks ago.. It was one sale, what could I do? LOL.. Fantastic mods. I'll be keeping those in mind when I get around to working on mine. In the mean time, I'm also building my own. Don't ask, I don't know why either.. LOL.. Too deep into it to quit now.. ;) |
Re: Big Siccx - 3DogRC's TRX6 Beauty, really like the wheels. Congrats Sawyer |
Re: Big Siccx - 3DogRC's TRX6 Quote:
|
Re: Big Siccx - 3DogRC's TRX6 What a great looking rig and new set of tires and rims! My younger brother has a TRX6 and I'm jealous of what things that truck can climb that mine can't. He looks absolutely joyous driving it! Hope you guys have lots of fun with it! |
Re: Big Siccx - 3DogRC's TRX6 Quote:
DeathProof is such a sicc truck, the scale details are over the top. Quote:
Thank you, yeah I think those couple mods clean up the rock slider area so much. Also, I read somewhere a guy snagged that section of the body that comes over the slider on a root and it tore the body halfway up the door. :shock: It happened on the opposite side as he was watching so he didn't notice until it was too late..... Quote:
|
Re: Big Siccx - 3DogRC's TRX6 Quote:
It is amazingly capable!! |
Re: Big Siccx - 3DogRC's TRX6 Scooped up the electronics!!! Went with a Castle Slate combo 1900kv Spent the evening soldering on the plug and the extra wires that will power the light module and the winch (one day). I plan to use a splitter on the channel that operates the transmission shift servo for the Mamba X auxiliary wire and assign that to drag break. Then I can have full drag break in 1st gear and no drag once I shift into 2nd! https://i.imgur.com/qaKQ7vhl.jpg |
All times are GMT -6. The time now is 03:30 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com