Traxxas BEC and Hitec servo
 

I bought a Hitec D956WP servo which can draw 5A at peak and want to use it to replace the TRX 4 stock servo. I heard the Traxxas BEC is rated 3A, but I don’t know what is the maximum it can provide. I understand Hobby 1080 is a better solution. But replacing the ESC requires too many modifications and I prefer not to do that now. Any idea if I can use the Traxxas BEC to power this Hitec servo? Thanks.

Re: Traxxas BEC and Hitec servo
 

Welcome to RCC!

Do NOT waste your time or money on the Traxxas 2260 BEC, it is not programmable and output is fixed at 6v 3a. The Castle Creations 10a BEC is a MUCH better choice when used with the Holmes Hobbies by pass harness and will serve you now and into the future. The best option would be to install the HW1080 and CC 10a BEC but you can add the HW1080 at a later date.

CC 10a BEC:
https://holmeshobbies.com/electronic...s-bec-10a.html

HH by pass harness:
https://holmeshobbies.com/electronic...s-adapter.html

Re: Traxxas BEC and Hitec servo
 

Thanks a lot for your advice. Both are out of stock and I will wait.

Re: Traxxas BEC and Hitec servo
 

RPP has the BEC in stock,

https://www.rpphobby.com/product_p/cse010-0004-00.htm

Re: Traxxas BEC and Hitec servo
 

Thanks. Found one at hobby town.com

Re: Traxxas BEC and Hitec servo
 

Don’t forget a quality servo horn that matches the splines on the steering servo.

Re: Traxxas BEC and Hitec servo
 

Thanks for the reminder. Got the metal version from Traxxas. Need figure out how to set the end points.