Sport 3 Gear Flat Skid Looking for a proven flat 3 gear VP skid for the sport. Not done a ton of research so I would be open to a standard trans flat skid. |
Re: Sport 3 Gear Flat Skid Quote:
I dont think I've seen a skid that fits the bill but I'm working on a mutt build and was just reminded of what you might be able to do. I've got some HPI Venture chassis rails and a SCX10.2 skid. The Skid is skinnier than the chassis so I made up some spacers to take up the extra space. I also had to drill new holes in the rails, I made up a jig to get the holes right. With that in mind you should be able to just get a flat skid made for the SCX10/10.2 and adapt it to fit the TRX4 rails. The TRX4 chassis is wider BTW EDIT: its actually looking to be the same width as the Venture so my spacers may work for you (depending on the skid used) if you have access to a 3D printer and I'd be happy to share the design. |
All times are GMT -6. The time now is 09:55 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com