Proline FJ40 on TRX4 Sport
 

So my wife's been wheeling her TRX4 Sport all year to good effect - she even built it herself, I just did the electronics. She wanted something different for the body and the Proline FJ40 fits the bill, but is designed for the Defender's longer wheelbase. I had fun doing this build/mod for her and thought I'd share the results.

I ordered the conversion kit that extend the Sport's 313mm wheelbase to 324mm https://traxxas.com/products/parts/8057 - it went on without a hitch.

I wanted to add some surface detail on the side so ordered a set of Toyota mirrors from Loops Models https://www.rc4x4-shop.com/Rubber-Mirrors-c3_5_2.htm I really like these cause they're made from flexible rubber and won't snap off on the rocks.

https://i.imgur.com/ALEbSP8.jpg

I also ordered a set of wheel arches from the Defender, as without them the wheels were looking goofy and sticking way out (I run 8mm wheel hexes).

https://i.imgur.com/X0GIafL.jpg

To dress up the rear I also ordered the Defender's spare tire mount and used the accessories that came with the TRX4 Kit.

https://imgur.com/X0GIafL

The body is designed to accommodate the stock Traxxas rear bumper, so it was retained, but the front begged for something more suited to the Toyota body. I ordered the SSD aluminum unit. PARTS FOR TRX-4D110 Aluminum Front Bumper for TRX4 / SCX10 II

https://i.imgur.com/3xbZsi2.jpg

The stock sliders also have enuf "give" in their mounting and can be angled to conform to the front taper of the FJ40

https://i.imgur.com/NrzlTF6.jpg

When I was masking off the body prior to painting it occurred to me that a better effect could be had by leaving the headlight lenses transparent and attaching the headlight stickers from the inside. This was done by slicking the headlight decals to some scrap paper that was tapped and glued from the inside.

https://i.imgur.com/J2AJlF2.jpg

The results gives a more 3D effect, at least to my eye. Here's a last one of the rig in action at the crawler course at Markham State Park in Sunrise, FL. Well, let me know what you guys think?

https://i.imgur.com/fHXw0cC.jpg

Re: Proline FJ40 on TRX4 Sport
 

Nice. I've always liked that style Toyota even in real scale.

Re: Proline FJ40 on TRX4 Sport
 

Not digging the rear fender flares but other than that it is a superb build. Color is great. Good idea with the headlights.


Sent from my iPad using Tapatalk

Re: Proline FJ40 on TRX4 Sport
 

Great looking body and color! I like that you added the rear fender flares to help cover up the tires from sticking out, but them being black really sticks out. I wonder if painting the front fender flares black with a flat clear over top of the black to dull the paint would help??

I also like how you cut the body in the rear to fit around the rear bumper!"thumbsup" Also, great idea for the headlights!

It is a great looking rig! Great job!"thumbsup"

Re: Proline FJ40 on TRX4 Sport
 

Agree with B-Mow (sort of). Part of the "look" of the FJ40 though is the lack of rear fenders, gives it that love-able 'breadbox' look. Any oversized tire would poke out on a 1:1 as well, I don't think it would be weird looking. But if you search 'custom FJ40' on Google there are plenty with flares, most are color matched and quite a bit smaller than those. So either way painting the rear blue or the front black would be a win!

Edit - apologies for ranting about the fenders, not trying to derail the thread over such a small detail.

Re: Proline FJ40 on TRX4 Sport
 

Indeed,and a big improvement over the Sport's rather dour design!

Re: Proline FJ40 on TRX4 Sport
 

Thanks for the kind works!! I also considered painting the front fenders flat black, but ultimately decided against it, as neither the color nor texture would be a direct match with the rears.

Re: Proline FJ40 on TRX4 Sport
 

Haha Phil, no worries, it's all about sharing and trading ideas. I've learned a TON from this forum, so happy to give back when a project might benefit others. Re fenders, see my reply to B-MOW71.

Re: Proline FJ40 on TRX4 Sport
 

Looks like I may have to fab up another FJ-40 cage since I sold this one. Yours looks fantastic on the TRX4.

https://i.imgur.com/iyScKc0.jpg

Re: Proline FJ40 on TRX4 Sport
 

I liked the FJ40 body on my wife's TRX4 Sport chassis so much I built one for myself!

https://i.imgur.com/2FAav0S.jpg

One only significant change to this build, was to use the spare tire setup form the Traxxas Bronco https://www.amazon.com/Traxxas-8074-.../dp/B07B6VBN4S This one done to save weight at the rear, as this setup is WAY lighter than the Defender's spare tire plus accessories on the green one (the Bronco's is hollow).

https://i.imgur.com/mjh2UWf.jpg

Now we can go cruise with "his and hers" Land Cruisers :mrgreen:

https://i.imgur.com/unoWKJD.jpg

Re: Proline FJ40 on TRX4 Sport
 

Theres so much win here. From cool Toyotas to wheeling with the wife.

Looks like they both have there own flavor while being of similar capability.

Re: Proline FJ40 on TRX4 Sport
 

These look great; I love that last photo with the two trucks on the tree. What color blue did you use on the FJ you put together for yourself?

Re: Proline FJ40 on TRX4 Sport
 

Great job on both! They look great! Nice outdoor pics showing them off!"thumbsup"

Re: Proline FJ40 on TRX4 Sport
 

Yeah, I'm lucky she enjoys wheeling, so we can share the hobby.

Re: Proline FJ40 on TRX4 Sport
 

Thanks, the TRX-4 is a fun build. Both colors were custom mixed from craft store acrylics and brushed on from the inside.

Re: Proline FJ40 on TRX4 Sport
 

Thanks, Brian! I'm still amazed how much fun you can have going slow with our tiny trucks!

Discontinued! :(
 

I always thought this one was one of Proline's coolest bodies, so why-oh-why discontinue it?? https://www.prolineracing.com/bodies...clear-body.asp

I picked another one up on fleebay just to have a spare.

Re: Proline FJ40 on TRX4 Sport
 

I like this body too, but find it odd that it's nowhere near 1/10 scale. It's more like 1/8.15 scale based on wheelbase.

Re: Proline FJ40 on TRX4 Sport
 

Yeah really a pity but of course it was catered to the TRX4 Defender wheelbase. It's not gonna look too happy beside a HPI Venture FJ cruiser body lol.

Re: Proline FJ40 on TRX4 Sport
 

True, it's a big body that looks larger than most rigs when placed side-by-side. It does however garner a LOT of attention, with folks always asking what it is, where to get one, etc.