Re: Hittman's Super Mini Build Quote:
That's pretty much exactly my set, but black and has different engraving (different company). I forget what company these are.. "Something Crawlers".. Or "blah blah crawlers".. Idk.:ror: |
Re: Hittman's Super Mini Build whats the width of your car.. Im having some issues to find out what to build.. I have a second bully2 with sudu pro chassis sitting over here... I can make it into a unlimited of super if i want.. Both classes arent normal over here... no one has one of them |
Re: Hittman's Super Mini Build What motor and axle pinion combo are you running. I'm getting parts together to make a rig based on the same axle setup. |
Re: Hittman's Super Mini Build Quote:
Quote:
Quote:
|
Re: Hittman's Super Mini Build Got out for a good day of practice! http://i1060.photobucket.com/albums/...pswqt4cuty.jpg Few posers http://i1060.photobucket.com/albums/...psgetqvmpp.jpg http://i1060.photobucket.com/albums/...psssgsd47w.jpg http://i1060.photobucket.com/albums/...psgfmrxu92.jpg The 400 pullers were a perfect fit"thumbsup" http://i1060.photobucket.com/albums/...psq4gdecel.jpg http://i1060.photobucket.com/albums/...pshuz8ulsc.jpg |
Re: Hittman's Super Mini Build Here is a little video from yesterday. Not too long, but it shows a little bit. https://youtu.be/GfeoK2oMrj0 For some reason I cannot get the video to embed... Keeps saying invalid webpage. Idk:roll: |
Re: Hittman's Super Mini Build So here is what I found from running this rig.. 1. This is NOT a pro rig! For my courses all I did was narrow up the pro gates we were running.. And changed a few of the tall ledges, due to the shorter wheel base of this rig. 2. I need to adjust my expectations BIG time! The problem was I was going out, expecting this rig to do (not exactly, but close) what my pro rig could do. The much narrower trackwidth totally changes the game. As well as the shorter wheelbase. After the first pack I was honestly disappointed. But after some thinking, We will be running these on the same courses as the Mini Crawlers. A mini course is NOTHING like a pro course.. the breakovers, sidehills, verticals, downhills.. everything is different! I have never setup or ran official mini courses. So I couldn't set up anything that resembled one. In the video, you can see on gate 3, I really struggle with that vertical.. That vertical wouldn't exist on a mini course. So what I am thinking is once this rig is on the correct course, it should do a lot better? 3. These RC4WD Bully tires are NOT impressive. They will be getting changed out very shortly. But, they did show me what I wanted to know. As far as the width goes, they are perfect. But, height could honestly be shorter. Going back to running these rigs on mini courses, Having a shorter tire on this rig, would definitely help with the COG. This rig has good COG, but being so narrow effects it tremendously. The height is not needed for a mini course either. The tallest mini tire is 4.75", then you have as skid with a transmission on it. This is a pro chassis, so with short tires, you will still have all the skid clearance you need.These are right about 5.5", I am thinking somewhere around 5" would be perfect. Being a new class, with nothing to judge against, its very hard to say what is good, what works, what sucks, ect.. Erik has pointed that out about his rig as well. I think Worlds is going to be very interesting"thumbsup" |
Re: Hittman's Super Mini Build Looking great! The short look I got with the video looked like you might want to bump up the shock oil a bit to help with stability. Just a thought. |
Re: Hittman's Super Mini Build Good to see some more videos of this new class, especially one running a SuDu chassis "thumbsup" It will be interesting to see how this one compares to the mini crawler. The mini crawlers even has a tire maximum of 4.25" |
Re: Hittman's Super Mini Build Quote:
Quote:
|
Re: Hittman's Super Mini Build Quote:
Quote:
I wouldnt take assumptions on what courses will look like though. Remember, they could be anything. They could put an advantage to a 6" wheelbase or a 20" wheelbase. There could be an advantage to a 4.25" tall tire or 6". We dont know. I do think a 2.2p course might be a good setup if there are gates that are take-able on each gate. Typically 2.2p courses dont have super hard gates, not like you would run while fun crawling anyway. |
Re: Hittman's Super Mini Build Lovin' the cliff danger.. Great vid.. Quote:
|
Re: Hittman's Super Mini Build Anyone ever wonder what a 5" Voodoo would look like? http://i1060.photobucket.com/albums/...psfvd0x6wh.jpg http://i1060.photobucket.com/albums/...psokn883cf.jpg http://i1060.photobucket.com/albums/...pskkrsezar.jpg Less "superish" but more fitting I think. http://i1060.photobucket.com/albums/...psqed62e2u.jpg http://i1060.photobucket.com/albums/...ps5litywnq.jpg Now I can get a little bit narrower hubs. http://i1060.photobucket.com/albums/...pspjucx7om.jpg Noticeable difference between the two. http://i1060.photobucket.com/albums/...ps0vterulz.jpg Also installed some aluminum knuckles and chubs on the rear. These had a layer of dust on the package when I bought them.. LHS had these for at least 4 years lol http://i1060.photobucket.com/albums/...psoavyqpo7.jpg |
Re: Hittman's Super Mini Build Tease.... I will be interested to see what you think of the smaller tires. It makes me wonder if we need portals that are upside down? |
Re: Hittman's Super Mini Build whats up with the superlite axels in pieces all around the rig?? Plans to change axels??? |
Re: Hittman's Super Mini Build Quote:
|
Re: Hittman's Super Mini Build Those are definitely super tubes. |
Re: Hittman's Super Mini Build Idk what ya'll are talking about...:mrgreen: http://i1060.photobucket.com/albums/...psbo4bbyfp.jpg http://i1060.photobucket.com/albums/...psbvx0gixc.jpg |
Re: Hittman's Super Mini Build It'll never work..... |
Re: Hittman's Super Mini Build Quote:
http://i1330.photobucket.com/albums/...pssqjuy9ab.jpg |
All times are GMT -6. The time now is 10:48 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com