RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Unlimited Class Crawlers (http://www.rccrawler.com/forum/unlimited-class-crawlers/)
-   -   Hittman's Super Mini Build (http://www.rccrawler.com/forum/unlimited-class-crawlers/541415-hittmans-super-mini-build.html)

Hittman 07-29-2015 06:02 PM

Hittman's Super Mini Build
 
I figured I would finally start a thread on this. I have been building one pretty much since Mr.Dlux started his, just havnt posted anything. I think this idea for an unlimited class is awesome. It's cool because almost everyone's rig is different. There are a mutitude of axles/chassis/wheel and tire combos/ect that can be combine to create a unique rig. This is the ultimate builders class.

In Erik's thread he had mentioned that losi axles would be about the right width for the mini super.. After some looking I came across a set of losi axles with an old moa conversion on them. Very minimal run time, pretty decent setup.
Of course you have to have steering front and rear.. It's a builders class why wouldn't you? A while back I picked up a losi front axle that had the XR mod done. That went up front, stock losi steering axle out back.

Chassis.. Hmm what to choose? Being that I am a DravTech team driver, and I had a spare Sudu Pro chassis sitting around, I figured that was a great choice"thumbsup" Out came the magic markers, trimmed the chassis down to what "looked right".

For the most part, this rig was built with parts that I had. Very minimal amount of money was spent to build this rig. Which is pretty cool I think. Here's some specs on the rig:

Axles
Losi axles
-Moa conversion
-XR steering and HD gears up front
-Stock losi steering and stock gears out back
RcBros steering arms
Rcbros knuckle weights (2.8oz per side.. It looked right:ror:)

Chassis/Suspension
DravTech Sudu Pro (cut down)
Mix and match links. I bent the lowers out of 3/16 Ti. Need to make some cf uppers to replace the current mismatch
Big bore shocks 3.5 w/cap mod(30wt oil, pink mini t's front and rear, Dlux no preload cups)

Tires/Wheels
Dlux g10 wheels (blue of course"thumbsup")
RC4WD Bully comp tires (narrowed to pizza cutters)
CI foam (special combo for the narrow tires)

Electronics
Futaba Bls157's front and rear.. Why not have a pair of $210, 513oz servos on this thing?:lmao:
Holmes 400pullers 33t (in the mail)
Castle sidewinder micro esc's
Castle bec X2
Futaba rx

Hittman 07-29-2015 06:02 PM

Re: Hittman's Super Mini Build
 
Here is a list of everything I have bought for this rig:

Losi axles w/Moa setup $85
Holmes 400 Pullers $~230
Bully tires $50
CI Foams $28

Total $393

Yeah, pretty minimal to have a Moa rig w/ 4WS. I was waiting on foams, now I am waiting on motors. I can't wait to have this rig running.

I'll get some pics up hopefully over the next couple days."thumbsup"

Curcal 07-29-2015 11:36 PM

Re: Hittman's Super Mini Build
 
You Tease

Jslick 07-30-2015 08:47 AM

Re: Hittman's Super Mini Build
 
Really, bully tires? Ottsix Team Driver.

Hittman 07-30-2015 02:28 PM

Re: Hittman's Super Mini Build
 
Quote:

Originally Posted by Jslick (Post 5271007)
Really, bully tires? Ottsix Team Driver.

It is was a quick and easy way to try out what height and width I wanted without cutting up a full set of Voodoos.. Not knowing how wide I needed them to be or how much I wanted to reduce them.

I didn't say they were staying on this rig forever.. I didn't say they were replacing the Voodoo pin tire on this or any of my rigs. I just wanted something I could mount up, without having to cut in every angle and hope I made them the right size.

So yes, really.

Jslick 07-30-2015 04:14 PM

Re: Hittman's Super Mini Build
 
:lmao::lmao: don't get your skinny jeans in a twist. Just teasing. Those tires are not cheap from what I saw to be using them as a test.

Erik D_lux 07-31-2015 10:31 AM

Re: Hittman's Super Mini Build
 
No pictures! What! Let me help you.

http://www.stormerhobbies.com/pics/losa4012.jpg

Cant wait to see some real pictures.

Thanks for breaking down the cost too. I think we are all in agreement that this class is really cool for multiple reasons. One of them being that it can be done with junk or spare parts.

Hittman 08-01-2015 06:43 PM

Re: Hittman's Super Mini Build
 
Here's some pics"thumbsup"

http://i1060.photobucket.com/albums/...psarlnvok0.jpg

http://i1060.photobucket.com/albums/...ps6lvvcwew.jpg

http://i1060.photobucket.com/albums/...pse0lbjxzo.jpg

As you can see, the XR steering is noticeably more than stock.
http://i1060.photobucket.com/albums/...psu2zzfygs.jpg

http://i1060.photobucket.com/albums/...psmfsl0gav.jpg

http://i1060.photobucket.com/albums/...psdmnzoagv.jpg

Max amps 430mah 3s fits nicely.
http://i1060.photobucket.com/albums/...psvstxgcjc.jpg

And my "body"
http://i1060.photobucket.com/albums/...pscknuiov4.jpg

douwe 08-02-2015 09:25 AM

Re: Hittman's Super Mini Build
 
That's a nice idea.... I think I will have to build a super mini also now... Don't think we will drive those over here.. But they look so much fun

Hittman 08-02-2015 02:53 PM

Re: Hittman's Super Mini Build
 
Quote:

Originally Posted by douwe (Post 5272559)
That's a nice idea.... I think I will have to build a super mini also now... Don't think we will drive those over here.. But they look so much fun

It was a super fun rig to build. Actually went together very smoothly. I was thinking it would be difficult to achieve the width/clearances needed, but these losi axles made it easy.

Curcal 08-02-2015 03:59 PM

Re: Hittman's Super Mini Build
 
Looks good whats your trackwidth?

Hittman 08-03-2015 05:43 AM

Re: Hittman's Super Mini Build
 
9 5/8" front, 9 3/8" rear

Hittman 08-07-2015 11:28 AM

Re: Hittman's Super Mini Build
 
Mmmmm.. Holmes...:twisted:

http://i1060.photobucket.com/albums/...psa03r5mmh.jpg

Hittman 08-07-2015 11:29 AM

Re: Hittman's Super Mini Build
 
I also got my lid painted and my steering links worked out."thumbsup"

http://i1060.photobucket.com/albums/...psjgbw2cfz.jpg

http://i1060.photobucket.com/albums/...pszpkwvnpv.jpg

http://i1060.photobucket.com/albums/...pscumcslhj.jpg

JOEY_P 08-07-2015 01:03 PM

Re: Hittman's Super Mini Build
 
Looks killer dude... Guess I have to build one now... Damn.

Hittman 08-07-2015 08:21 PM

Re: Hittman's Super Mini Build
 
The length on these 400's is awesome. Gave me all the clearances I needed. Will post more pics tomorrow, or later.

http://i1060.photobucket.com/albums/...ps2irzpbsm.jpg

Hittman 08-07-2015 08:22 PM

Re: Hittman's Super Mini Build
 
Quote:

Originally Posted by jcperea69 (Post 5275846)
Looks killer dude... Guess I have to build one now... Damn.

Do it bruh.. These little rigs are awesome.

Tom G 08-08-2015 08:30 AM

Re: Hittman's Super Mini Build
 
Ware did you get those motor to axle mounting plates

Hittman 08-08-2015 09:24 PM

Re: Hittman's Super Mini Build
 
Quote:

Originally Posted by Tom G (Post 5276300)
Ware did you get those motor to axle mounting plates

eBay. I can't remember what brand they are. Something that was disco'd a long time ago.

grunt95 08-09-2015 08:13 PM

Re: Hittman's Super Mini Build
 
Quote:

Originally Posted by Hittman (Post 5276583)
eBay. I can't remember what brand they are. Something that was disco'd a long time ago.

I call lies! Well yours arnt black but heres a link from the bay
MOA Kit per Losi CCR NCR Porno Crawler | eBay

Gota love their name..


All times are GMT -6. The time now is 01:07 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com