Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Vanquish Products VS4-10 Origin
Loading

Notices

Thread: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Reply
 
LinkBack Thread Tools Display Modes
Old 07-16-2018, 08:43 PM   #21
Rock Stacker
 
Join Date: Feb 2012
Location: Monterey, CA
Posts: 53
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by imthatguy View Post
Quote:
Originally Posted by mikemcE View Post
Watched Josh build it, gear to spool, slide bearings onto, follow with retainers, drop in. Could caps be reversed side to side ?
That was my thought as well, caps looked odd to me in the photo.
I'm not sure if you mean swapping the two retainers, or that they are flipped backwards.

I've tried swapping them, no difference. The bearing cannot be inserted at all if the retainer is flipped the wrong way.

Keep in mind, the assembly that works in the rear housing, cannot be installed in the front housing.
rohrej is offline   Reply With Quote
Sponsored Links
Old 07-17-2018, 07:26 AM   #22
Moderator
 
JatoTheRipper's Avatar
 
Join Date: Sep 2008
Location: PA
Posts: 13,921
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

PAINTED steel hardware?! Please, tell me this isn't true.
If that's true it's simply inexcusable. All that pretty aluminum will look like shit when mixed with rust.

Quote:
Originally Posted by rohrej View Post
It's nice. I've build 50ish kits from all different manufacturers over the last 30 years. This one is *really* nice. That said, I also had high expectations, and maybe that set me up to be a little overly critical. Keep that in mind for what follows below.
You bought a $900 kit which is basically an upgraded SCX10. It's impossible to be overly critical. It should be perfect at that price.

The early bird gets the worm except with new products. Then the early bird gets more problems.
JatoTheRipper is offline   Reply With Quote
Old 07-17-2018, 07:41 AM   #23
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,816
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by JatoTheRipper View Post
PAINTED steel hardware?! Please, tell me this isn't true.
If that's true it's simply inexcusable. All that pretty aluminum will look like shit when mixed with rust.



You bought a $900 kit which is basically an upgraded SCX10. It's impossible to be overly critical. It should be perfect at that price.

The early bird gets the worm except with new products. Then the early bird gets more problems.


Well I’m not happy with painted, but it rusts almost as fast as black oxide.

I’m not sure if perfection will be possible in anything for consumers.
That said this kit seem to hit all the low spots that the stock kits are full of.
I’m not a VP hugger, but do expect top shelf. The review and content from Matt at SBG swayed me the cheapskate to belly up. I’m curious of overall, but not having an SCX to compare with it will be a challenge.
Body and interior seem well thought out.

Don’t forget if Harley likes it it must be good............


What ??? He works for VP!!!!


Hang up and Drive
mikemcE is offline   Reply With Quote
Old 07-17-2018, 08:10 AM   #24
MSH
Pebble Pounder
 
Join Date: Oct 2006
Location: belgium, roeselare
Posts: 184
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Perfection is a myth. nothing is perfect.
MSH is offline   Reply With Quote
Old 07-17-2018, 08:15 AM   #25
RCC Addict
 
Join Date: May 2015
Location: Price Twp.
Posts: 1,291
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by mikemcE View Post
Well I’m not happy with painted, but it rusts almost as fast as black oxide.

Can't use stainless in the aluminum as it will oxidize where the two metals meet. Not a whole lot of options, well other then anti oxidation compound.



Oh Mike you made me blow coffee out my nose with that comment.
Ditchrat is offline   Reply With Quote
Old 07-17-2018, 08:28 AM   #26
Moderator
 
JatoTheRipper's Avatar
 
Join Date: Sep 2008
Location: PA
Posts: 13,921
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by mikemcE View Post
Well I’m not happy with painted, but it rusts almost as fast as black oxide.

I’m not sure if perfection will be possible in anything for consumers.
That said this kit seem to hit all the low spots that the stock kits are full of.
I’m not a VP hugger, but do expect top shelf. The review and content from Matt at SBG swayed me the cheapskate to belly up. I’m curious of overall, but not having an SCX to compare with it will be a challenge.
Body and interior seem well thought out.

Don’t forget if Harley likes it it must be good............


What ??? He works for VP!!!!


Hang up and Drive
Quote:
Originally Posted by MSH View Post
Perfection is a myth. nothing is perfect.
When I said perfect I meant without issues. Yes, you can make products without issues.

Quote:
Originally Posted by Ditchrat View Post
Can't use stainless in the aluminum as it will oxidize where the two metals meet. Not a whole lot of options, well other then anti oxidation compound.
There are better coatings than paint to prevent galvanic corrosion.
JatoTheRipper is offline   Reply With Quote
Old 07-17-2018, 08:32 AM   #27
RCC Addict
 
Join Date: May 2015
Location: Price Twp.
Posts: 1,291
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by JatoTheRipper View Post
There are better coatings than paint to prevent galvanic corrosion.

Did you not understand my sarcastic font? I'm sorry I shall endeavor to do better next time.
Ditchrat is offline   Reply With Quote
Old 07-17-2018, 08:35 AM   #28
MSH
Pebble Pounder
 
Join Date: Oct 2006
Location: belgium, roeselare
Posts: 184
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

without issues yes. but you did say perfect first.

this is the first problem with one tough.
MSH is offline   Reply With Quote
Old 07-17-2018, 08:36 AM   #29
Moderator
 
JatoTheRipper's Avatar
 
Join Date: Sep 2008
Location: PA
Posts: 13,921
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by Ditchrat View Post
Did you not understand my sarcastic font? I'm sorry I shall endeavor to do better next time.
Touché!
JatoTheRipper is offline   Reply With Quote
Old 07-17-2018, 10:12 AM   #30
Rock Crawler
 
Join Date: May 2018
Location: USA
Posts: 792
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Gotta love how all these small businesses are starting to use CUSTOMERS as there first level beta testers instead of actually having quality control in house. Its super annoying getting pieces that dont fit when they should be doing a dry fit on everything before even shipping it out.
Rekreant is offline   Reply With Quote
Old 07-17-2018, 10:12 AM   #31
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,816
Default Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by Ditchrat View Post
Can't use stainless in the aluminum as it will oxidize where the two metals meet. Not a whole lot of options, well other then anti oxidation compound.



Oh Mike you made me blow coffee out my nose with that comment.


I might point out that the screws into the axle are SS.
I’m speaking about the other fasteners.
Saw this RC review on you tube.
These guys bought one, no freebie.

https://youtu.be/HpAkSCF3UZE

Sorry about the coffee, Harley made me do it !



Hang up and Drive
mikemcE is offline   Reply With Quote
Old 07-17-2018, 10:14 AM   #32
Rock Crawler
 
Join Date: May 2018
Location: USA
Posts: 792
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by Ditchrat View Post
Can't use stainless in the aluminum as it will oxidize where the two metals meet. Not a whole lot of options, well other then anti oxidation compound.



Oh Mike you made me blow coffee out my nose with that comment.
In my experience only the bit holes on black oxide rust, and thats because of the torque used when installing them. Paint will chip quite easily off all parts of a screw.
Rekreant is offline   Reply With Quote
Old 07-17-2018, 10:17 AM   #33
Rock Stacker
 
Join Date: Feb 2012
Location: Monterey, CA
Posts: 53
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by mikemcE View Post
I might point out that the screws into the axle are SS.
I’m speaking about the other fasteners.
Saw this RC review on you tube.
These guys bought one, no freebie.

https://youtu.be/HpAkSCF3UZE

Sorry about the coffee, Harley made me do it !

Hang up and Drive
Yes, the screws holding on the diff cover are stainless, I'll update the post to clarify.
rohrej is offline   Reply With Quote
Old 07-17-2018, 10:17 AM   #34
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,816
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

I have a number of black oxide with rust all over. Yup started at the hex, crept all around, I live and run in 90% humidity , regular treatments of corrosion liquids keep it happy. I tried SS everywhere, but those soft hex heads are worse


Hang up and Drive
mikemcE is offline   Reply With Quote
Old 07-17-2018, 10:37 AM   #35
Rock Crawler
 
Join Date: Jul 2016
Location: Southern Oregon
Posts: 767
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Nice to see some honest info about some of the potential shortcomings...!
JSterrett is offline   Reply With Quote
Old 07-17-2018, 10:45 AM   #36
Moderator
 
JatoTheRipper's Avatar
 
Join Date: Sep 2008
Location: PA
Posts: 13,921
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Black oxide isn't a great corrosion prohibitor. It's a very thin layer of oxidation hence the name. Zinc coating would have been a better option. That can be done in black.

I've never had issues stripping the heads of quality stainless steel hardware. Lower end stuff have sloppy heads that quickly strip.
JatoTheRipper is offline   Reply With Quote
Old 07-17-2018, 10:54 AM   #37
I wanna be Dave
 
Join Date: Jun 2016
Location: Deep in the Everglades
Posts: 5,816
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

And cadmium still looks great


Hang up and Drive
mikemcE is offline   Reply With Quote
Old 07-17-2018, 11:37 AM   #38
Rock Crawler
 
Join Date: May 2018
Location: USA
Posts: 792
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by JatoTheRipper View Post
Black oxide isn't a great corrosion prohibitor. It's a very thin layer of oxidation hence the name. Zinc coating would have been a better option. That can be done in black.

I've never had issues stripping the heads of quality stainless steel hardware. Lower end stuff have sloppy heads that quickly strip.
Ive managed to strip any and every hex ever just as long as im wrenching on it like a 250lb gorilla.
Rekreant is offline   Reply With Quote
Old 07-17-2018, 11:37 AM   #39
RCC Addict
 
Join Date: May 2015
Location: Price Twp.
Posts: 1,291
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Quote:
Originally Posted by mikemcE View Post
I might point out that the screws into the axle are SS.
I’m speaking about the other fasteners.

Which in itself may not be an issue. Anodization is intended to be a barrier against oxidization. It also serves as a barrier against galvanic reactions.


The question becomes are they tapped before or after being anodized, if before is the hole clean enough that the screw doesn't remove the anodized layer.


I would expect it is, otherwise we would have a lot of complaints about frozen screws. But you know that's not a bad question to ask.
Ditchrat is offline   Reply With Quote
Old 07-17-2018, 12:31 PM   #40
MSH
Pebble Pounder
 
Join Date: Oct 2006
Location: belgium, roeselare
Posts: 184
Default Re: Vanquish VS4-10 Origin Limited Build/Thoughts Issues

Parts are treaded before anodizing.
MSH is offline   Reply With Quote
Reply

Tags
build, vanquish, vs4-10



Vanquish VS4-10 Origin Limited Build/Thoughts Issues - Similar Threads
Thread Thread Starter Forum Replies Last Post
IN STOCK NOW!! Vanquish Products VS4-10. RPP Hobby RPP Hobby 0 07-12-2018 06:02 PM
Limited Quantity Available for PRE ORDER Vanquish Products Products VS4-10. RPP Hobby RPP Hobby 0 06-08-2018 05:15 PM
Vanquish VS4-10 scale crawler Teng Vanquish Products VS4-10 Origin 5 05-28-2018 06:15 AM
🌑PRE ORDER Vanquish Products VS4-10! RPP Hobby RPP Hobby 2 05-27-2018 03:39 PM
VXL 3s power issues - thoughts? TwistedXT Electronics 12 11-22-2011 09:29 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com