RCCrawler Forums

ROLANDROCKSHOP · 05-18-2010, 05:22 PM

are they back instock yet??

Vp Monkey · 05-25-2010, 06:18 PM

Quote:

Originally Posted by rubiredunlmtd

are they back instock yet??

Pretty much have everything in stock atm, minus the few that went to plating.

jcboof · 06-01-2010, 05:52 PM

Anyone happen to know the outside edge to outside edge measurement of the SLWs w/.225 offset on a berg with SEDONAS??

mustangboy_347 · 06-01-2010, 08:18 PM

i run the SLW V3 .700 w/225 spacer on my sons truck it measures 10 5/8 from lug to lug...and on my rig i run the SLW V1 NT .500 w/225 spacer and it measures 9 3/4 lug to lug....hope this helps

jcboof · 06-01-2010, 08:47 PM

Thanks Jeff!! Thats what I wondered!

mustangboy_347 · 06-01-2010, 08:54 PM

no problem ...

..plus you can always run different hex nuts also...

xrra_tj · 07-09-2010, 01:05 PM

Will the V3 ever be avalible in 1.35 width?

tom@vp · 07-09-2010, 01:47 PM

Quote:

Originally Posted by xrra_tj

Will the V3 ever be avalible in 1.35 width?

at this time, no... just not enough demand.

mustangboy_347 · 07-09-2010, 01:47 PM

Quote:

Originally Posted by xrra_tj

Will the V3 ever be avalible in 1.35 width?

check out the SSZ-11 on VANGQUISH's site i think they are pretty close

tom@vp · 07-09-2010, 02:38 PM

Quote:

Originally Posted by mustangboy_347

check out the SSZ-11 on VANGQUISH's site i think they are pretty close

The SSZ are 1.0 wide

xrra_tj · 07-09-2010, 02:39 PM

guess I'll have to get V1 then. Unless theres any plan to do 1.35 anytime soom

hardhead · 08-01-2010, 08:13 PM

I sent you a e~mail about the offsets on the slw4. My e~mail is rcfufumes@gmail.com Thanks

Slyp Dawg · 09-23-2010, 10:12 AM

bit of an odd question, but how does a set of 1.0" SLW V1s with the 225 hubs match up in terms of backspacing compared to say, a set of tamiya dish-star 4WD buggy fronts? I've got a dirt oval bomber I'm building based on an old Bandit, using a Parma '41 Willys body, and I'm trying to come as close to tucking the tires as I can within the confines of the Bandit chassis, and finding narrow (1" wide), 12mm hex mount 2.2s with negative offset isn't exactly easy and so far, other than said dish-stars (which don't really look that good at all) and HB D4/HPI Cyber10B fronts and MAYBE Duratrax Maximum BX fronts (can't find a good measurement on the front hexes of those), these are my best bet and certainly look the best, especially if I could get the rings in flat finish and either black or crimson hardware to match the planned flat black w/ gloss black accents paintscheme. any help is much abliged, and if at all possible I'll be rockin some SLW V1s in the clay roundyround by the end of the year

dragrcr · 09-23-2010, 03:23 PM

Look for the slwnt wheels they will be even more tucked in than a regular slw is.

Slyp Dawg · 09-23-2010, 04:09 PM

no such thing exists. the only hit for Vanquish RC SLWNT on google was a link to your post

richardgarrett56 · 10-12-2010, 06:47 PM

spent a crap load on vanquish wheels dh p comps slw offset hubs and bullet weights from( ckrc ) and not one sticker

...this is the last time i buy from ckrc

HEAVY METAL · 11-29-2010, 04:47 PM

do you have plans for centre caps for the slw v1?

Trugg · 12-01-2010, 08:13 PM

Any plans to offer the SLW beadlock rings in your "Bronze" color?
....I know there probably isnt much demand for this color... but i think it is the COOLEST color rings you have

Please make them in "Bronze" for me

Weasel · 03-27-2011, 12:04 AM

I got my wheels in, very impressed. Had one that wasn't fully drilled and had to send it back but VP sent out a new one right away.

I see the bolts are metric

(only thing on my Losi that is) but what size are thread pitch are they? I need some replacement as one has already stripped out

tom@vp · 03-27-2011, 01:07 AM

Quote:

Originally Posted by Weasel

I got my wheels in, very impressed. Had one that wasn't fully drilled and had to send it back but VP sent out a new one right away.

I see the bolts are metric

(only thing on my Losi that is) but what size are thread pitch are they? I need some replacement as one has already stripped out

Yea sorry about that wheel. that actually does not happen very much at all. but as far as stripping, id have to say it that is very weird, i can say i've had one call on that in 3 years. i don't recommend using power tools and deadlock screws do not have to be wrenched down hard, just seated untill the beadlock hits the wheel and snug from there.

here is the parts list
http://www.vanquishproducts.com/slw-description.html

24EA. M3x6 SST BHCS

06-01-2010, 08:54 PM	#166
mustangboy_347 Rock Crawler Join Date: Feb 2009 Location: LaGrange Posts: 899	no problem .....plus you can always run different hex nuts also...

08-01-2010, 08:13 PM	#172
hardhead Rock Crawler Join Date: Aug 2008 Location: Strugglin Posts: 963	Tom I sent you a e~mail about the offsets on the slw4. My e~mail is rcfufumes@gmail.com Thanks

09-23-2010, 10:12 AM	#173
Slyp Dawg Pebble Pounder Join Date: Dec 2006 Location: Earth Posts: 151	bit of an odd question, but how does a set of 1.0" SLW V1s with the 225 hubs match up in terms of backspacing compared to say, a set of tamiya dish-star 4WD buggy fronts? I've got a dirt oval bomber I'm building based on an old Bandit, using a Parma '41 Willys body, and I'm trying to come as close to tucking the tires as I can within the confines of the Bandit chassis, and finding narrow (1" wide), 12mm hex mount 2.2s with negative offset isn't exactly easy and so far, other than said dish-stars (which don't really look that good at all) and HB D4/HPI Cyber10B fronts and MAYBE Duratrax Maximum BX fronts (can't find a good measurement on the front hexes of those), these are my best bet and certainly look the best, especially if I could get the rings in flat finish and either black or crimson hardware to match the planned flat black w/ gloss black accents paintscheme. any help is much abliged, and if at all possible I'll be rockin some SLW V1s in the clay roundyround by the end of the year Last edited by Slyp Dawg; 09-23-2010 at 10:14 AM.

10-12-2010, 06:47 PM	#176
richardgarrett56 Rock Crawler Join Date: Feb 2010 Location: chin ckeck Posts: 752	im not good enuff spent a crap load on vanquish wheels dh p comps slw offset hubs and bullet weights from( ckrc ) and not one sticker ...this is the last time i buy from ckrc Last edited by richardgarrett56; 10-13-2010 at 06:12 AM.

12-01-2010, 08:13 PM	#178
Trugg Rock Crawler Join Date: May 2008 Location: Mansfield, PA Posts: 560	Any plans to offer the SLW beadlock rings in your "Bronze" color? ....I know there probably isnt much demand for this color... but i think it is the COOLEST color rings you have Please make them in "Bronze" for me Last edited by Trugg; 12-01-2010 at 08:16 PM.

05-18-2010, 05:22 PM	#161
ROLANDROCKSHOP I wanna be Dave Join Date: Mar 2007 Location: roland,ar Posts: 5,981	are they back instock yet??

06-01-2010, 05:52 PM	#163
jcboof I wanna be Dave Join Date: Oct 2008 Location: I miss Rowdy Posts: 2,238	Anyone happen to know the outside edge to outside edge measurement of the SLWs w/.225 offset on a berg with SEDONAS??

06-01-2010, 08:18 PM	#164
mustangboy_347 Rock Crawler Join Date: Feb 2009 Location: LaGrange Posts: 899	i run the SLW V3 .700 w/225 spacer on my sons truck it measures 10 5/8 from lug to lug...and on my rig i run the SLW V1 NT .500 w/225 spacer and it measures 9 3/4 lug to lug....hope this helps

06-01-2010, 08:47 PM	#165
jcboof I wanna be Dave Join Date: Oct 2008 Location: I miss Rowdy Posts: 2,238	Thanks Jeff!! Thats what I wondered!

07-09-2010, 01:05 PM	#167
xrra_tj Rock Crawler Join Date: Jan 2009 Location: lenoir, nc Posts: 573	Will the V3 ever be avalible in 1.35 width?

07-09-2010, 02:39 PM	#171
xrra_tj Rock Crawler Join Date: Jan 2009 Location: lenoir, nc Posts: 573	guess I'll have to get V1 then. Unless theres any plan to do 1.35 anytime soom

09-23-2010, 03:23 PM	#174
dragrcr Quarry Creeper Join Date: Jan 2010 Location: GV Posts: 286	Look for the slwnt wheels they will be even more tucked in than a regular slw is.

09-23-2010, 04:09 PM	#175
Slyp Dawg Pebble Pounder Join Date: Dec 2006 Location: Earth Posts: 151	no such thing exists. the only hit for Vanquish RC SLWNT on google was a link to your post

11-29-2010, 04:47 PM	#177
HEAVY METAL Rock Stacker Join Date: Oct 2007 Location: Maple Ridge B.C. Canada Posts: 91	do you have plans for centre caps for the slw v1?

03-27-2011, 12:04 AM	#179
Weasel Rock Stacker Join Date: Oct 2005 Location: Rapid City Posts: 58	I got my wheels in, very impressed. Had one that wasn't fully drilled and had to send it back but VP sent out a new one right away. I see the bolts are metric (only thing on my Losi that is) but what size are thread pitch are they? I need some replacement as one has already stripped out

Sponsored Links

RCCrawler Forums

Thread: Vanquish Products SLW