New idea thread?

[mprudic0404]

got a idea thats new,

AXIAL lower shock caps. the stock ones are bad. One made from AL that threads together, instead of snap??

got a unrelated question for ya.
what is the hardness rating of the coating on the 43/13 gear set? i asked this because i tried to countersink the 4 screw holes that keep the diff together and it Toasted my first center bit. second one worked, but usualy this only happens on upper rockwell coatings. (i prefer to use countersunk Ti screws in my diff as they are lighter and arent affected by temps like steel)

picture for shock part, not sure if its possible. if you do consider it, a PTFE insert would be the bee's knees to perfect shocks.



Sent from my SM-N910V using Tapatalk

[Levesque87]

2.6 beadlocks for the J Concepts tires. Heck Id pre-order and pay today.

[mprudic0404]

Originally Posted by Levesque87

2.6 beadlocks for the J Concepts tires. Heck Id pre-order and pay today.

i second that!!

AL -hard anodized beadlock if possible, somthing TOUGH!!!



Sent from my SM-N910V using Tapatalk

[mprudic0404]

It seems as if most of the rim/wheel choices for the 2.6 jconcepts are SOFT. they dont take much abuse.

aftermarket beadlocks could fix this. heck, if the offset was enough, we wouldnt even need adaptors!!



Sent from my SM-N910V using Tapatalk

[CM9000]

1.55 wheels should be made already..

Sent from my LGMP260 using Tapatalk

[Gula]

I'd love to see an traxxas emaxx pass thru differential housing made from billet

[GuyOverThere]

Hello! I would love to see a dig unit for a bomber style trans because you know... dig is awesome.

[CM9000]

Im sure there is an adapter for the wraith or scx10 style trans to run on a bomber skidplate. Or a wraith skidplate swap. Not worth making a dig kit for a different trans.

Originally Posted by GuyOverThere

Hello! I would love to see a dig unit for a bomber style trans because you know... dig is awesome.

Sent from my LGMP260 using Tapatalk

[mprudic0404]

Originally Posted by CM9000

1.55 wheels should be made already..

Sent from my LGMP260 using Tapatalk

the jconcepts are 2.6.

Sent from my SM-N910V using Tapatalk

[CM9000]

Originally Posted by mprudic0404

the jconcepts are 2.6.

Sent from my SM-N910V using Tapatalk

2.6 is irrelevant to 1.55.

Sent from my LGMP260 using Tapatalk

[JatoTheRipper]

Originally Posted by CM9000

1.55 wheels should be made already..

Sent from my LGMP260 using Tapatalk

This! Tiny tires are gaining massive ground and it's about time VP makes a scale 1.55.

[mprudic0404]

this seems like a failure of 3-part.

not sure where small wheels came into play but ok.

i doubt any company will make such large wheels, but it was worth the try.

No doubt RC/hobbists would buy scale items, (smaller wheels/tires) and its nothing new about monster truck guys having to make/create what they need.



Sent from my SM-N910V using Tapatalk

[Tucson YETI]

VS410 Origin shock towers in the works perhaps?


Sent from my iPhone using Tapatalk

[ferp420]

i think the f9 3rd member should be available seperatly it would make for super easy gear changes and give a solid platform for custom axle build i know there are plastic third menbers outhere but plastic dosent hold up under high power in high temps and vanquish already makes them wouldent be any extra cost other than marketing

[Still Bill]

Axle housings for the Element Enduro.

[Pedeanaut]

Some Revo driveshaft yokes would be nice. Can't find them anywhere. RC-monster had some listed on their site but no replies and out of stock.

[Mudsy]

Axial Capra weight hangers

Sent from my SM-G920V using Tapatalk

[Panther6834]

And F9 Currie portal axles...similar to the SCX10.2 version, but wider (to match the width of the stock Capra axles).

~ More peace, love, laughter & kindness would make the world a MUCH better place

[NEW YORK BOY]

im still waiting on 1.55

[anrjch]

What about a sway bar kit for everything including vs4 -10 and vs4-10 pro

Sent from my SM-G975U using Tapatalk