New idea thread? Have an idea you want us to build? Post it here, now granted we might already have something in the works, so do not post it, and later go that was my idea ! Jim |
A really scale winch. Powers !!!!! Scale 2.2 and 1.9 wheels I think that already in the works. :ror: |
4.5" OR 4" SLW'S for the super class rigs! If you need help with design requirements PM me "thumbsup" |
More AX10/SCX10 parts. Lockers, Gears etc..."thumbsup" |
quality AX 10 "CVDs" for under $85-100 currently there is really only axial $25 and super 300 $160 we need some thing in the middle, between cheap and rediculous. and i second the vote for a scale wheel. and not a blingy SEMA or mall crawler style. |
Faux diff covers for Axial axles. Preferably in a raw steel so they can rust or even brushed aluminum, or ARB style like those other guys. Can't believe no one has made these yet....so many naked scx10s out there and money to be made. By the way Im throwing my name in the hat as a tester when you get a set made:lmao: |
Quote:
a cvd run is planned, we just have to get in that mode. |
Quote:
|
Knuckles with built in slug holders8) I don't care if they just fit your wheels, having the ability to add 4 ounces of nonrotating weight would be sweet without having to go to two different vendors. |
Quote:
|
Quote:
Also, concave face SLW's. example http://farm3.static.flickr.com/2644/...18d58f13_b.jpg |
Brass chubs and knuckles. |
Quote:
|
Quote:
|
Quote:
|
Quote:
|
A set of slw's like this with the concave face http://i122.photobucket.com/albums/o...4/images-2.jpg More 3 piece wheels with the beadlock ring on the outside and the biggest id as possible to make room for knuckle weights. Xr10 rear straight axles Berg 4 link mounts that move the upper link mounting point towards the front of the truck, resulting in a longer upper link Xr10 link mounts that move the upper links up for both axles creating more separation at the axle I can keep going... |
Quote:
Maybe the LH weights will fit on the knuckles inside the wheels...? Id like to see up to 6 slugs per knuckle. 1.9 SLWs for the MRC in all versions!!! |
Quote:
|
|
Quote:
|
Lower link mounts for Bully axles that put the link location in the same place as a berg. |
More 3 piece wheels with the beadlock ring on the outside and the biggest id as possible to make room for knuckle weights. Xr10 rear straight axles Berg 4 link mounts that move the upper link mounting point towards the front of the truck, resulting in a longer upper link Xr10 link mounts that move the upper links up for both axles creating more separation at the axle I can keep going... X2 "thumbsup" xr10 upper link mount for sure to get rid of the bent links |
Ok, here are my idea's Before I get started. The idea with the scale rims with brake pads is something I am patiently waiting for. 1. Scale rims. I have been intrested in seeing some rims from you guys that actually is the VP style of things. I would love to see a rim based off the Xd or BRP designs. I always think of Vanquish when it comes to those rims. 2. A 3 position clocakable C for the Axial SCX-10 axles. 3. With the reolution of servo winchs and heyok's hack fixing the creeping issue. I think there are quite a few of us sick of the WARN style winch. Sure we can purchase the pro-line dummy, but let's face it. Us scale guys love realism. So perhaps a dummy winch that looks like the real Bulldog winch. Not RC4WD's version, there is a company called Bulldog. 4. Low profile light bars 5. And my all time favorite. HR makes a low profile transmission. I would love to own something like that with better gears and a case that's better built. even a 2 speed version would be kickass. It would allow 3d interiors and keep the CG low. Hope this helps, thanks |
MRC parts...knuckles, clocked c's, 4 link plates, good shocks would be awesome, 1.9 wheels of course, lcc knuckles cvd conversion kits, wideners, gears, lockers. Bully...adjustable link/shock mounts, new super light weight cases-pm krakker, axle tubes designed with the servo cutout, more wheel offsets, different weight slugs, smooth faces wheels(all countersunk hardware with smooth or dished design, knuckles. Axial...scale axle cases, redesigned tranny case, tranny gears, lockers. Misc...scale transfer case with adjustable gear ratios, working high power winch, a selection of real good shocks would be nice, billet aluminum scale parts, a variety of hexes with different offsets for use with other wheels, sealed water proof cases for common servos. Ok think thats it for now. :twisted: |
Some good ideas in here....I do like the idea of a respectable 2 speed. If anyone can do all these suggestions, it's VP. There shop is insane! |
Definitely some kind of knuckle weights. Or knuckles with the ability to add lh slugs. "thumbsup" |
Quote:
Quote:
Quote:
Quote:
Quote:
I'm not gonna pretend to know how involved the process would be to make these, but I can say for sure that they would sell. It's the only part of the Super game that still has a hole in it. Your thoughts? Tell us yes...tell us no...but tell us something...pleeeeease "thumbsup" |
bleh, when i think of supers i think of a cool flyer, and it says whohoo, raging party, girls, beer, food, live band... and then when you get there theres like 5 people, a crusty porn mag, empty chip bag. polished off a six pack, and no friggan band.. anybody making tires worth a crap yet im out of the looop... Quote:
|
Quote:
We're making our own tires. but the sizes for those tires have leveled out. everyone is running a pretty standard size nowadays. But, if that how ya feel about the class i guess we wont hold our breath. |
Quote:
|
Quote:
|
XVD's FOR THE CREEPER , "thumbsup" AND IN STOCK |
Hey Tom, were my idea's not in a direction you guys are intrested in? |
Quote:
we are working on or would like to make items 1-4 5 is a new idea for us |
x's however many now there is on some integrated knuckle weights. On all makes, Berg, XRs, AX-10s........ |
Quote:
|
um you said wheel area right? what about making an actual working manual locking hubs? I have no idea how you would do it but it be cool to see someone come up to their rig and turn their front hubs to lock the front? |
Something for the scaler guys who run servo winches... A metal spool with splines to fit servos!!! Something that replaces the plastic round servo horn and bobbin. Put me down for 2! "thumbsup" |
How about redsign on Berg cases. |
All times are GMT -6. The time now is 04:29 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com