Vaterra Ascender Narrow Front Bumper
 

Hi Guys, So I Basically Could Never Leave Anything Alone So I Got Rid Of My K-5 Blazer Body & Rebuilt My Vaterra Ascender Using The Shortest Wheelbase. I Then Threw On A Clod Body I Had Laying Around. So Far So Good, Just That The Original Ascender Front Bumper Looks A Lil Too Wide For The Clod Body.

Does Anyone Know Of A Narrow Front Bumper That Would Fit The Vaterra Ascender? I Know I Can Cut & Customize The Original Bumper But I Would Like To Upgrade To A Steel Front Bumper. Any Help Would Be Much Appreciated, Thanks.

As You Can See On This Pic The Original Bumper Sticks Out About Half Inch On Each Side.....

https://imageshack.us/a/img633/4039/bEc2wm.jpg

Here's A Few More....

https://imageshack.us/a/img903/3791/nN8jVz.jpg

https://imageshack.us/a/img907/1736/lFFm2j.jpg

On This Pic You Can See How It Sticks Out About Half A Inch....

https://imageshack.us/a/img661/8264/qQQYxl.jpg

Re: Vaterra Ascender Narrow Front Bumper
 

Cut the ends off the bumper and use ShoeGoo or E6000 black to glue end caps back on the bumper. "thumbsup"