Need help with RC4WD PRO10 1.9 Steel Stamped Beadlock Wheels

[cen0]

Just got the RC4WD Pro10 Wheels and learned that they do not fit because of the pin mount vs ascender hex mount.
(You should know that i just got into crawlers and never built one before)

Now iam pretty unsure what is needed for them to fit. I assume these
Can someone confirm please?

Another thing....tried to use the Stock Ascender Tires but iam not sure this will work because they may have a little too less space on this wheels.
However if they dont fit well i need new Tires for the Pro10 Wheels as well, any recommendations?

[Crank]

This is what you will need to change the pin mount on the pro 10's to hex mount- OEM Steel 1.9 Stock Beadlock Wheel Hexes

[motoxman]

Hi,

You should get these adapters:
1.9"/2.2" 6 Lug Steel Wheel Hex Hub +3 Offset

I could mount the wheel without any adapters by removing the hex on the truck but my tires were rubbing on the steering knuckles.

Buy these so you can get a little more offset and a perfect fit.

[Natedog]

Originally Posted by cen0

Just got the RC4WD Pro10 Wheels and learned that they do not fit because of the pin mount vs ascender hex mount.
(You should know that i just got into crawlers and never built one before)

Now iam pretty unsure what is needed for them to fit. I assume these
Can someone confirm please?

Another thing....tried to use the Stock Ascender Tires but iam not sure this will work because they may have a little too less space on this wheels.
However if they dont fit well i need new Tires for the Pro10 Wheels as well, any recommendations?

No, you need one of the hex adapters below.

Originally Posted by Crank

This is what you will need to change the pin mount on the pro 10's to hex mount- OEM Steel 1.9 Stock Beadlock Wheel Hexes

Those will work too and come with all hardware (2.5mm socket head screws and flatnuts).

Originally Posted by motoxman

Hi,

You should get these adapters:
1.9"/2.2" 6 Lug Steel Wheel Hex Hub +3 Offset

I could mount the wheel without any adapters by removing the hex on the truck but my tires were rubbing on the steering knuckles.

Buy these so you can get a little more offset and a perfect fit.

These will work too if you don't want the look of lugnuts created by the use of 2.5mm nuts on the wheel side, just screw right into the hex adapter and use some scale hardware. These do increase overall track width by 3mm per side.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


These are nice scale items and will bolt right up giving you the hex adapter on the wheels, nice disk brake rotors and they come with scale hardware.
1.9"/2.2" 6 LUG STEEL WHEEL HEX HUB WITH BRAKE ROTOR, Part Number:Z-S0530
http://store.rc4wd.com/1922-6-Lug-St...r-_p_2457.html

[Natedog]

Awww, here's what i need now...

These are nice scale items and will bolt right up giving you the hex adapter on the wheels, nice disk brake rotors and they come with scale hardware.
1.9"/2.2" 6 LUG STEEL WHEEL HEX HUB WITH BRAKE ROTOR, Part Number:Z-S0530
1.9"/2.2" 6 Lug Steel Wheel Hex Hub with Brake Rotor

[Bry73]

Natedog, those look really nice, good find. Now if it would just list it as 1, pair, or set of 4, $24 for 1 might slow down the budget builder a little.

[Natedog]

Bry73, that price is for set of four with hardware.

From RC4WD site....
What's Included:
4x Steel Wheel Hex Hub with Brake Rotor
24x M2.5 x 8mm Silver Scale Hex Head Bolts (Z-S041
1x Hex Head Tool (Z-S0635)