The beater

[Natedog]

Originally Posted by pete959

Ok as the Beater sits
Codyboy front and rear super heavy axles
Codyboy xr modded shafts
Delux knuckles
4 vp method wheels with 475 hubs
4 gold klr voodoo tires
2 ottsix 1.9 under 10lb foams
2 ottsix 1.9 over 10lb foams
Traxxis rods and ends for steer linkage
Ssd links
Ssd diff covers
Ssd front chubs
Ssd winch
Scaler fab pro bumper with stinger and drings
Doubledz rear upper link riser
Vaterra alum shocks
Gpm upper link moumts
Mip shafts
Holmes trailmaster 2700 sensored
Mmp
Savox
I am sure i forgot stuff will edit later

LIFE IS GOOD

Any shock limiters, springs that came with the Vaterra aluminum shocks? Love watching the videos you posted with this setup.

[raceeng18]

Originally Posted by CODYBOY

Told you so, 1/4" stainless steel tub with a wall thickness of .035. I made a jig, so maybe I will start making these. I have one set available.
Did everything line up ok for you?
Ernie

Pete, can you move your sliders back one hole on the chassis? Just wondering.

I think my new Bronco could use a set of those sliders.

[CODYBOY]

Originally Posted by raceeng18

I think my new Bronco could use a set of those sliders.

I kind got away from those for while. I don't have a bronco to get measurements off of, I think those would be to wide? I have had some testers out for quite a while, no problems so it is time to do some up.
Ernie

Hey Pete, I miss your posts!!!!

[raceeng18]

Originally Posted by CODYBOY

I kind got away from those for while. I don't have a bronco to get measurements off of, I think those would be to wide? I have had some testers out for quite a while, no problems so it is time to do some up.
Ernie

Hey Pete, I miss your posts!!!!

No hurry, I'm heading for Kona Hawaii tomorrow for a couple of weeks. When I return I'll PM you and will provide whatever you need.

[mikebecher]

Originally Posted by raceeng18

No hurry, I'm heading for Kona Hawaii tomorrow for a couple of weeks. When I return I'll PM you and will provide whatever you need.

Bring a rig, I'll go crawling with you

[raceeng18]

Originally Posted by mikebecher

Bring a rig, I'll go crawling with you

Thanks for the invite mikebecher, I'm unprepared this time, maybe next time. We are there most every January.

[pete959]

Sorry been mia getting alot of my builds going and starting my hands at promoting comps. My first is thus weekend. The beater is ready i went with proline scalers 95mm now stock single spring and 45wt. The rears r both heavy springs from the double spring set up my be a bit firm may cut a ring or 2 out next week.

LIFE IS GOOD

[pete959]

Small tires kinda fit lol

LIFE IS GOOD

[pete959]

LIFE IS GOOD

[pete959]

I dont do much but drive her anymore. I am going to do some changes soon. Work on steering and some scale points

LIFE IS GOOD

[pete959]

Ok i fixed steering my drag link was bent and hanging up and i moved my codyboy gullwing sliders back to fit under doors

LIFE IS GOOD

[pete959]

this is what my girl drove up she can pick some good lines

LIFE IS GOOD

[Natedog]

Very nice lines she picks and crawls! You're still at standard WB2 with this truck?

[pete959]

Originally Posted by Natedog

Very nice lines she picks and crawls! You're still at standard WB2 with this truck?

No this is wb4 i cut 2 braces and ziptie the rear down so it is like funny car to get inside with the long wheel base it puts motor in cab some but u never notice. Also why i had to customize my gullwing sliders from codyboy holes didnt match with cab. I thought about the spacers to move cage back but didnt look right to me. So i put together stock and modfided

LIFE IS GOOD

[Markos]

Love the truck and the location You are lucky !

[pete959]

was a good weekend

LIFE IS GOOD

[pete959]

Havent changed much just maintance. I havent been comping it just trail rides lately. Everything is holding up great.

Sent from my LGMS631 using Tapatalk

[pete959]

Great weekend for trailin

Sent from my LGMS631 using Tapatalk

[Yeti.stealth]

Oh man that's a cool K10 now!

I'm so tempted to stretch mine out to wb4, think I would cut the rear chassis off level with the cage too.

All you guys seem to be getting great results with the RULRs, I'm gunna try get my hands on some one day....or make em!

[pete959]

Originally Posted by Yeti.stealth

Oh man that's a cool K10 now!

I'm so tempted to stretch mine out to wb4, think I would cut the rear chassis off level with the cage too.

All you guys seem to be getting great results with the RULRs, I'm gunna try get my hands on some one day....or make em!

The batt tray mounts r perfect so if u r not useing them flip sides and now they r urlr

Sent from my LGMS631 using Tapatalk